苏鲁超高压变质带的深部构造特征——宽频地震层析结果

为了探测苏鲁超高压变质带的岩石圈结构实施了山东日照到滨洲剖面的宽频带地震探测,于2003～2005年使用REFTER130-01型和CMG-6TD型三分量地震仪(频宽50～60s).以10～25km间距布设了25个台站观测近三年时间.由远震地震层析反演结果得到了华北板块、超高压变质带、扬子板块清晰的P波速度图像.华北板块具有简单的低速体形态,越过郯庐断裂向超高压变质带扩张,并平稳地由郯庐断裂向北延伸直到黄河以北的古城镇.Moho面和岩石圈深度分别为30～35km,75～80km;扬子板块为高速体,界于两者之间的苏鲁超高压变质带地壳的平均速度大于两侧板块,剖面上从日照到五莲-烟台断裂范围内除地壳为高速体外,30～60km深度范围内有一个高速体和一个低速体拼会在一起,构成了超高压变质带岩石圈最突出的构造特征.此高速体应为榴辉橄榄岩等超基性岩组成,它可能属于折返回来又被移动的超高压变质岩组合体,并与华北板块基底直接接触,超高压变质带的下界面深度为60km.下界面平直,可能意味着正在消退的造山带的山根,或是造山带的下一层Moho面?郯庐断裂带地壳出露的共四条带,比较陡的产状向深部延伸,并逐步向南倾,TLF2～TLF4在岩石圈底界处合并.     

Geology and Metallogenesis of the Sawayaerdun Gold Deposit in the Southwestern Tianshan Mountains, Xinjiang, China

The Sawayaerdun gold deposit, located in Wuqia County, Southwest Tianshan, China, occurs in Upper Silurian and Lower Devonian low‐grade metamorphic carbonaceous turbidites. The orebodies are controlled by a series of NE‐NNE‐trending, brittle–ductile shear zones. Twenty‐four gold mineralized zones have been recognized in the Sawayaerdun ore deposit. Among these, the up to 4‐km‐long and 200‐m wide No. IV mineralized zone is economically the most important. The average gold grade is 1–6 g/t. Gold reserves of the Sawayaerdun deposit have been identified at approximately 37 tonnes and an inferred resource of 123 tonnes. Hydrothermal alteration is characterized by silicification, pyritization, arsenopyritization, sericitization, carbonatization and chloritization. On the basis of field evidence and petrographic analysis, five stages of vein emplacement and hydrothermal mineralization can be distinguished: stage 1, early quartz stage, characterized by the occurrence of quartz veins; stage 2, arsenopyrite–pyrite–quartz stage, characterized by the formation of auriferous quartz veinlets and stockworks; stage 3, polymetallic sulfide quartz stage, characterized by the presence of auriferous polymetallic sulfide quartz veinlets and stockworks; stage 4, antimony–quartz stage, characterized by the formation of stibnite–jamesonite quartz veins; and stage 5, quartz–carbonate vein stage. Stages 2 and 3 represent the main gold mineralization, with stage 4 representing a major antimony mineralization episode in the Sawayaerdun deposit. Two types of fluid inclusion, namely H₂O–NaCl and H₂O–CO₂–NaCl types, have been recognized in quartz and calcite. Aqueous inclusions show a wide range of homogenization temperatures from 125 to 340°C, and can be correlated with the mineralization stage during which the inclusions formed. Similarly, salinities and densities of these fluids range for each stage of mineralization from 2.57 to 22 equivalent wt% NaCl and 0.76 to 1.05 g/cm³, respectively. The ore‐forming fluids thus are representative of a medium‐ to low‐temperature, low‐ to medium‐salinity H₂O–NaCl–CO₂–CH₄–N₂ system. The δ³⁴S_CDT values of sulfides associated with mineralization fall into a narrow range of ?3.0 to +2.6‰ with a mean of +0.1‰. The δ¹³C_PDB values of dolomite and siderite from the Sawayaerdun gold deposit range from ?5.4 to ?0.6‰, possibly reflecting derivation of the carbonate carbon from a mixed magmatic/sedimentary source. Changes in physico‐chemical conditions and composition of the hydrothermal fluids, water–rock exchange and immiscibility of hydrothermal fluids are inferred to have played important roles in the ore‐forming process of the Sawayaerdun gold–antimony deposit.     

Orogenic Gold Mineralization in the Qolqoleh Deposit, Northwestern Iran

The Qolqoleh gold deposit is located in the northwestern part of the Sanandai‐Sirjan Zone, northwest of Iran. Gold mineralization in the Qolqoleh deposit is almost entirely confined to a series of steeply dipping ductile–brittle shear zones generated during Late Cretaceous–Tertiary continental collision between the Afro‐Arabian and the Iranian microcontinent. The host rocks are Mesozoic volcano‐sedimentary sequences consisting of felsic to mafic metavolcanics, which are metamorphosed to greenschist facies, sericite and chlorite schists. The gold orebodies were found within strong ductile deformation to late brittle deformation. Ore‐controlling structure is NE–SW‐trending oblique thrust with vergence toward south ductile–brittle shear zone. The highly strained host rocks show a combination of mylonitic and cataclastic microstructures, including crystal–plastic deformation and grain size reduction by recrystalization of quartz and mica. The gold orebodies are composed of Au‐bearing highly deformed and altered mylonitic host rocks and cross‐cutting Au‐ and sulfide‐bearing quartz veins. Approximately half of the mineralization is in the form of dissemination in the mylonite and the remainder was clearly emplaced as a result of brittle deformation in quartz–sulfide microfractures, microveins and veins. Only low volumes of gold concentration was introduced during ductile deformation, whereas, during the evident brittle deformation phase, competence contrasts allowed fracturing to focus on the quartz–sericite domain boundaries of the mylonitic foliation, thus permitting the introduction of auriferous fluid to create disseminated and cross‐cutting Au‐quartz veins. According to mineral assemblages and alteration intensity, hydrothermal alteration could be divided into three zones: silicification and sulfidation zone (major ore body); sericite and carbonate alteration zone; and sericite–chlorite alteration zone that may be taken to imply wall‐rock interaction with near neutral fluids (pH 5–6). Silicified and sulfide alteration zone is observed in the inner parts of alteration zones. High gold grades belong to silicified highly deformed mylonitic and ultramylonitic domains and silicified sulfide‐bearing microveins. Based on paragenetic relationships, three main stages of mineralization are recognized in the Qolqoleh gold deposit. Stage I encompasses deposition of large volumes of milky quartz and pyrite. Stage II includes gray and buck quartz, pyrite and minor calcite, sphalerite, subordinate chalcopyrite and gold ores. Stage III consists of comb quartz and calcite, magnetite, sphalerite, chalcopyrite, arsenopyrite, pyrrhotite and gold ores. Studies on regional geology, ore geology and ore‐forming stages have proved that the Qolqoleh deposit was formed in the compression–extension stage during the Late Cretaceous–Tertiary continental collision in a ductile–brittle shear zone, and is characterized by orogenic gold deposits.     

胶南造山带中高压、超高压变质矿

胶南造山带榴辉岩中的高压、超高压变质矿物主要有绿辉石、镁铝榴石、柯石英、金刚石、金红石等。柯石英、金刚石均呈微晶状包裹于石榴子石、绿辉石中。柯石英多已转化为石英聚晶,并使包裹它的矿物产生放射状胀裂纹;金刚石呈近等轴八面体等,其形成压力达３．５ＧＰａ以上。榴辉岩围岩中的高压、超高压变质矿物主要有辉石类（透辉石、霓石、暗硬玉）、钠钙质钠质角闪石（钠闪石、镁钠闪石）、多硅白云母（３Ｔ型）、钠长石、绿帘石等。高压、超高压变质矿物的广泛出现指示区内存在两期高压变质作用：早期为超高压榴辉岩相变质作用;晚期为高压绿片岩相榴辉岩相变质作用。华北板块与扬子板块的多次碰撞是区内高压、超高压变质作用产生的主要原因。     

蒙阴县苏家沟科马提岩

苏家沟科马提岩呈透镜状残留体赋存于早元古代二长花岗岩中,主要由蛇纹石化橄榄科马提岩、透闪石岩、透闪片岩、阳起透闪片岩、绿泥透闪片岩、黑云阳起片岩等组成,具典型的鬣刺结构及变余鬣刺结构。该科马提岩的岩石学、岩石化学及结构特征与世界典型地区科马提岩极为相似,属橄榄科马提岩。     

对山东高压-超高压变质带的几点看法——程裕淇院士野外考察记

通过对山东高压超高压变质带的考察,初步认为：榴辉岩的最后隆升时代为燕山期;含硬玉石英岩＋榴辉岩＋（透辉石）大理岩组合说明表壳岩经历了高压超高压变质作用;该带晋宁期长英质片麻岩花岗岩广泛出露;在其北部麻粒岩和榴辉岩密切伴生。     

策勒绿洲与荒漠交错带达木沟剖面近4ka来干湿波动记录

位于塔克拉玛干沙漠南缘策勒绿洲与荒漠交错带的达木沟剖面高分辨率地记录了这一区域近４ｋａ来的环境演变历史。虽然,可以反映干湿波动的Ｒｂ／Ｓｒ比值曲线明显地反映了近４ｋａ来本地区持续干旱化的特征,且有后期加剧的趋势。但年代学及剖面沉积特征的研究还表明,在此期间仍有若干次相对湿润与干旱化加剧时期的波动。     

山区暖带的农业生态效应——以秦岭-黄淮平原交界带为例

分析了山区暖带对当地农业生态环境的影响和暖带资源利用中应注意的若干问题．     

西秦岭北带泥盆纪Nereites遗迹相及其环境分析

西秦岭北带泥盆系舒家坝组下一中上部的巨厚陆源碎屑岩系中含有极丰富的遗迹化石,它们可为解释该组沉积环境提供重要信息:（1）由大量典型深水遗迹化石组成的Nereites遗迹相,可与世界各地浊积岩系和复理石相中的Nereites遗迹相进行对比,该遗迹相主要发育在浊流沉积区直至深海平原,其沉积水深最大可超过2000m;（2）舒家坝组的遗迹群落中,除大量属深水型分子外,还见有典型的浅水分子,两种水深性质不同的遗迹组合共生在一个沉积剖面,正是浊积岩系和复理石相才具有的独特分布特征;（3）根据沉积层序和遗迹组合的对比确认舒家坝组不存在风暴岩。     

浙西北地区反转构造初步研究

通过浙西北地区金衢、乌马和杭嘉湖3个地震解译剖面及地表地质的综合分析,指出研究区在以T₂为主变形期的逆冲变形体制之前存在同方向的引张体制,并随后发生反转。通过计算反转比等综合分析,发现其总体反转程度自南东往北西方向逐渐变小,反映出反转后的褶皱冲断变形程度呈现自南东往北西方向变弱之趋势。