沁水盆地武乡区块上古生界煤系页岩气储层孔隙特征和孔隙结构

储层孔隙特征和孔隙结构是影响页岩气赋存与储集的重要因素。为评价海陆过渡相高演化煤系页岩储层性质与页岩气储集性能,应用扫描电子显微镜、高压压汞、低温N₂和 CO₂气体吸附、微米CT扫描、核磁共振实验方法,对沁水盆地武乡区块上古生界煤系页岩气储层孔隙微观特征和孔隙结构进行了研究。结果表明,沁水盆地武乡区块上古生界煤系页岩样品中发育多种类型微观孔隙,常见粒间孔、粒内孔和微裂缝,有机质孔几乎不发育;武乡区块煤系页岩气储层样品孔隙总孔容分布在0.021 9~0.073 5 mL/g之间,平均值为0.039 9 mL/g,总比表面积主要分布在11.94~46.83 m²/g之间,平均为29.16 m²/g,其中介孔(2~50 nm)和微孔(<2 nm)是煤系页岩气储集的主要载体。煤系页岩中的高配位数孔隙数量越多,相应的孔容和孔比表面积越大,孔隙连通性越好;在孔隙数量和总孔容相差不大的前提下,山西组煤系页岩储层孔隙结构与连通性比太原组煤系页岩稍好。     

Obituary

Geological sections are still best drawn at natural scale. Sections with vertical exaggerations are rarely drawn correctly, and even when computed carefully give a false notion of the structural features. Many schematic sections which are not drawn to scale and are supposed to explain a proposed new tectonic interpretation give such a distorted and frequently absurd picture of the structural features that they cannot be regarded as valid.     

鄂尔多斯地块—扬子地块深部电性结构特征及其动力学意义

位于青藏高原东北缘的秦岭造山带在大地构造上南接扬子地块、北接华北地块,是特提斯构造域和古亚洲洋构造域的转换带。本文基于对一条起始于扬子地块,穿过秦岭造山带和鄂尔多斯地块,到达河套地堑的南北向大地电磁测深剖面的研究,探讨秦岭造山带和其北侧的鄂尔多斯地块、南侧的扬子地块之间的接触关系,以及青藏高原物质东北向逃逸等地学问题。对实测数据进行了张量阻抗分解和维性分析等工作,并对剖面进行了二维反演,获得岩石圈电性结构模型。根据电阻率模型认为:在秦岭造山带北部发现大规模"瓶颈状"分布的低阻异常体(C2),可能为华北、华南地块双向俯冲前缘地幔物质的上涌通道,或者是青藏高原中、下地壳物质沿秦岭造山带中构造薄弱位置向东逃逸的通道;在秦岭造山带和大巴山弧形带边界处发现南倾的低阻异常(C1),解释为大巴山弧形带北缘的逆冲断裂在电性上的反映;电性结构模型中,扬子地块高阻异常体(R2、R3和R4)向北倾斜至秦岭造山带下方,而北部鄂尔多斯地块的高阻异常体(R5和R6)向南倾斜至秦岭造山带下方;高阻异常通常被认为是稳定岩石圈的反映,据此推断这两组相向俯冲至秦岭造山带下方的高阻异常是华北地块和扬子地块向秦岭造山带下方汇聚的电性结构探测依据;鄂尔多斯地块南、北电性差异较大,北部中、下地壳大规模分布电阻率值在3～100Ω·m之间的低阻异常体,可能为地幔上涌导致的局部熔融或含盐流体共同作用的结果。     

华北地块南部断裂体系新构造活动特征

根据野外观察、测量与分析,特别是综合华北地块南部断裂体系第四纪活动性质的构造和地貌标志,表明现今华北地块南部NWWNW向断裂活动最为显著,主要表现为左旋走滑性质;在前新生代构造基础上发育的三门峡-鲁山-舞阳断裂带和新构造期发育的新乡-商丘断裂带是具有走滑性质的新生代壳内活动断裂。地球物理资料表明,在介休-新乡-溧阳和巴东-泉州-台湾地震带西北部的深部存在两个NW向构造带,在地幔可能汇聚为一条构造带。综合这些断裂及其所控断陷盆地的展布特征,明确了该区的NE向、NW向及近EW向断裂的运动学关系。即在应力应变基底格局的制约下,两个NW向构造带强烈的左旋走滑拉分运动作用下导致华北地块南部发育拉分盆地,NW向新断裂的形成和先存NNE、NW及近EW向断裂的复活,控制了新生代复杂的断裂或断块构造格局的形成。     

Geochemistry and zircon U–Pb–Hf isotopes of the 780 Ma I-type granites in the western Yangtze Block: petrogenesis and crustal evolution

ABSTRACT

Neoproterozoic I-type granites could provide vital insights into the crust–mantle interaction and the crustal evolution along the western Yangtze Block, South China. This paper presents new zircon U–Pb ages, bulk-rock geochemistry, and in situ zircon Lu–Hf isotope on the Dalu I-type granites from the southwestern Yangtze Block. Zircon U–Pb dating show the crystallization ages of 781.1 ± 2.8 Ma for granodiorites and 779.8 ± 2.0 Ma for granites, respectively. The Dalu granodiorites are Na-rich, calc-alkaline, metaluminous to slightly peraluminous (A/CNK = 0.94–1.08). Zircons from granodiorite have positive εHf(t) values (+2.16 to +7.39) with crustal model ages of 1.21–1.54 Ga, indicating juvenile mafic lower crust source. The Dalu granites are high-K calc-alkaline, peraluminous rocks. They have variable zircon εHf(t) values (?4.65 to +5.80) with crustal model ages of 1.31–1.97 Ga, suggesting that they were derived from the mature metasediment-derived melts by the mixing of newly formed mafic lower crust-derived melts. The geochemical variations in Dalu pluton is dominated not only by the different source rocks but also by the different melting temperatures. Combining with the geochemistry and isotopic compositions of I-type granitoids and tectonic setting in the western Yangtze Block, we propose that the Dalu I-type granodiorites–granites associations are the magmatic response from different crustal levels, which were induced by the heat anomaly due to the asthenosphere upwelling in the subduction-related setting.     

Zircon U–Pb Ages and Lu–Hf Isotope of the Dongchuan Group in Central Yunnan,China, and their Geological Significance

On the southwestern margin of the Yangtze Block, the Dongchuan Group consists of slightly metamorphosed sedimentary rocks, including silty slate, argillaceous slate, clayey slate, arkose, dolomite, and minor volcanic rocks. To date, it is still a controversy over the depositional age and stratigraphic sequence of the Dongchuan Group. In this study, we analyzed five samples of meta-sedimentary rocks and one sample of meta-tuff from the Yinmin, Luoxue and Etouchang Formations of the Dongchuan Grou...     

Multi-stage metallogeny in the southwestern part of South China,and paleotectonic and climatic implications: A high precision geochronologic study

The South China Block (SCB) is among the large-scale W-Sn mineralized regions of the globe. The Laojunshan W-Sn-dominant ore area (LOA) in the western part of the SCB preserves the records of the tectonic history of the Tethys realm extending through North Vietnam, and Yangtze to Cathaysia blocks, with coeval formation of giant metallic deposits. The prolonged tectonic activities and their control on the genesis and spatio-temporal distribution of giant metallic deposits in the LOA provide a window for a holistic understanding of the tectono-metallogenesis of the SCB. In this study, we present results from a multi-chronologic study to determine the timing of formation of the cassiterite-wolframite-scheelite mineralization. The results suggest three distinct tectono-metallogenic periods in the LOA during the geodynamic evolution of the surrounding tectonic units. The opening of the Proto-Tethys Ocean between the Yangtze-Indochina blocks and the westward Paleo-Pacific subduction beneath the Cathaysia block (420–380 Ma) jointly contributed to the Silurian to early Devonian intracontinental orogeny in the middle of the SCB that involved top-to-the-north thrusting along NE-striking shear zones. This event generated the Dulong-Song Chay granitoids, together with the formation of Xinzhai Sn deposit related to sheared mylonitic granites (ca. 419 Ma) and pegmatites (ca. 389 Ma), which include the early-stage Sn-sulfide skarn (ca. 418 Ma) and the late-stage Sn-bearing schist (ca. 389 Ma). During the Late Permian to Late Triassic (260–220 Ma), with the closure of the Proto-Tethys oceans in the west and ongoing Paleo-Pacific westward subduction in the east, the SCB and Indochina Block (IB) were amalgamated which also marks the time of formation of the Nanwenhe scheelite skarn deposit. The subducted Paleo-Tethys oceanic crust was likely entrained by the nearby rising Emeishan mantle plume (270–259 Ma), which formed the Maguan diabase (ca. 260 Ma) that shows significantly older Re-Os model age of ca. 268 Ma, suggesting that the Nanwenhe mineralization is potentially derived from ca. 260 Ma source. Furthermore, the intraplate shortening induced thin skinned crustal deformation and low grade metamorphism (ca. 230 Ma), with the main stage of scheelite-Sn-Mo mineralization (229.9, 229.8 and 219 Ma) and contemporary formation of the pegmatite (230.7 Ma). The Late Cretaceous involved two episodes of alternate extension and shortening, driven by the subduction polarity change from northwestward subduction of the Okhotomorsk block to northward subduction of the NeoTethys seafloor. The evolution of the LOA consists of the NW–SE transpression ending ca. 100 Ma, the WNW–ESE extension in the earlier episode lasting from 100 Ma to 86 Ma, the WNW–ESE transpression beginning at ca. 85 Ma and the NS extension in the later episode during the latest Cretaceous, which produced the extension-related three periods of Laojunshan granitic magmatism and coeval Sn-W mineralization, with ages in the range of 90–89 Ma, 87–85 Ma and 83–79 Ma. We also evaluate the implications of magmatic-metamorphic-metallogenic degassing on the regional paleoclimatic history.     

广西加里东运动构造古地理问题

广西历来被认为是我国加里东运动的典型地区,志留纪末的造山运动使早泥盆世莲花山组砾岩不整合于下伏地层之上。但是,实际上莲花山组只分布于广西中部的大明山－大瑶山地区和东北部扬子地块边缘,并且,它不具备同造山期磨拉石沉积特征,而是古陆剥蚀面上新海侵序列底部的滨海相沉积。广西西部的晚古生代台地相区,泥盆系底部为泥岩或粉砂岩,超覆于寒武系台地相沉积层之上。滇东南和越南北部邻区情况类似。推测在早古生代时它们属于一个地块,可称为“桂滇－北越地块”。早奥陶世云开地块和桂滇－北越地块、扬子地块的会聚和挤压,形成了大明山－大瑶山地体寒武系东西向的线形褶皱带。这是广西加里东运动的主幕。晚奥陶世-早志留世华夏地块和扬子地块的碰撞带在广西仅限于它的东北部,表现为震旦系-下志留统近南北向的线形褶皱带。志留纪末并无造山运动的证据。早泥盆世开始,可能由于地幔柱活动而使桂滇－北越地块裂解,形成北越地块、靖西台地和其他更小的块体。     

Shape analysis and multispectral classification in geological remote sensing

This paper discusses the usage of mathematical morphology in image processing of remotely-sensed data for geologic interpretation. Particular attention is given to noise-reducing transformations of spectral bands before and after different methods of classification, and to the usage of textural context. The development of a viable processing strategy requires a multidisciplinary approach and expert knowledge in different areas: (a) geology, geomorphology, and vegetation in a study area, (b) properties of the sensor for imagery photointerpretation, (c) spectral/spatial properties of the digital data within an integrated dataset (remote sensing and ancillary data), and (d) data-processing tools including mathematical morphology theory. Examples of geometric characterization of Canadian LANDSAT scenes are described in which shape measurements are obtained using a PC-based hybrid image-processing and geographic information system, termed ILWIS, which was developed at ITC, in the Netherlands. Classes from supervised and unsupervised classification are compared to guide in geological mapping. Classes over individual occurrences of broad vegetation-landform units are studied to aid in environmental mapping. Field knowledge is the context necessary to construct expert procedures to drive sequences of data-processing steps toward a target result such as optimal classification, enhancement, or feature extraction. The interaction between expert rules and the image-processing steps can be based on synthetic measurements of shape to quantize the information either spatially or spectrally. Many useful geometrical transformations of spatially-distributed data are extensions or generalizations of spatial analysis functions typical of geographic information systems.     

Geostatistical estimation of chemical contamination in stream sediments: The case study of Vale das Gatas mine (northern Portugal)

Based on an environmental geochemistry case study carried out in the neighbourhood of a W–Sn abandoned mine, the pollution in stream sediments was modelled through a Global Contamination Index. Such an index permits one to summarize the combination of deleterious elements in a single variable, obtained by the projection of samples onto the first axis of a PCASD (Principal Components Analysis of Standardized Data) applied to the entire n × p matrix containing the available concentrations of p = 16 elements in the set of n = 220 collected samples.In order to provide a sound basis for a coherent planning of the remediation process which will be put in operation in the affected area, it is necessary to balance the costs of reclaiming with the probabilities of exceeding the upper limits accepted for concentrations of environmentally harmful elements in sediments. Given these limits, they are back-transformed in the index values, providing a practical threshold between ‘clean’ and ‘contaminated’ samples. On the other hand, the minimum dimension of the cell to be reclaimed is restrained by the selected remediation process to be applied in the affected area. Hence, to meet the constraints of such a remediation process, it is required to estimate the probabilities of exceeding the index threshold in technologically meaningful sub-areas. For this end, the Indicator Block Kriging technique was applied, producing a series of maps where sub-areas to be reclaimed can be spotted for different probability levels. These maps, on which the decision making remediation agency can rely for its cost-benefit analysis, take into account both the spatial structure of ‘clean’ vs. ‘contaminated’ samples and the constraints of the reclaiming process.