土木工程结构的双层多重调谐质量阻尼器控制策略

为能得到用尽可能少的调谐质量阻尼器(TMD)组成有效性和鲁棒性高的多重调谐质量阻尼器控制系统，本文提出了一种适用于土木工程结构的新控制策略——双层多重调谐质量阻尼器(DMT—MD)。使用定义的优化目标函数，评价了双层多重调谐质量阻尼器(DMTMD)的控制性能。数值结果表明，双层多重调谐质量阻尼器(DMTMD)比多重凋谐质量阻尼器(MTMD)具有更好的有效性和对频率调谐的鲁棒性。DMTMD比双重调谐质量阻尼器(DTMD)具有更好的有效性，而DMTMD和DT—MD对频率调谐的鲁棒性近似相同。因此，双层多重调谐质量阻尼器是一种先进的结构控制策略。     

多维地震动各方向相关性对拱坝动应力的影响

本文将随机振动的虚拟激励法与拱坝-地基动力相互作用FE-BE-IBE时域模型结合，发展了一个可以考虑多维随机地震动作用下的拱坝动力响应计算模型，并用Monte Garlo方法对模型进行了验证，计算结果表明，地震动分量的相关性对结构的动力响应存在一定影响，合理考虑地震动各方向分量的相关性可以更好地计算实际地震作用下的拱坝动力响应。     

斜拉桥纵向设置粘滞阻尼器参数分析

采用Maxwell阻尼模型模拟了粘滞阻尼器的滞回耗能特性。通过对设置粘滞阻尼器斜拉桥纵向非线性地震反应的分析，讨论了粘滞阻尼器各参数对结构地震响应的影响，并通过计算证实了粘滞阻尼器具有良好的消能减振效果。     

Controlled Fracture Growth by Blasting While Protecting Damages to Remaining Rock

Summary. Conventional blasting causes cracks and fractures in the rock. Controlled blasting techniques produce the macrocrack in a desired direction and eliminate microcrack in the remaining rock. Macrocrack development in desired direction is required for extraction of dimensional stone and at the same time there is need to reduce microcrack development in the block and remaining rock. To achieve the objectives, experimental work in the quarries was carried out for separating marble block from the in situ strata as practiced in some of the Indian mines by using detonating cord of 30 to 50 g/m by varying hole spacing, hole diameter, air cushioning, water and sand filled blast-holes. Blasthole notching was carried out. Further, tests were carried out by using various liners inside the blasthole to determine the damages in the extracted block and remaining rock. The designed experimental work was undertaken and rock samples were collected by coring before and after blasting for quantification of microcrack in the rock. P-wave velocity and microscopic studies were conducted for quantification of damages. Experiments were also conducted at laboratory scale for the quantification of damages in single circular and notched holes with variation of stemming and liners. The P-wave velocity close to hole always reduces after blast and in case of NG-based charge and detonating cord it decreases up to 1/3^rd. With PVC pipe and paper tube liners decrease is negligible. Thus, by using notched hole with paper tube, decrease in P-wave is minimum indicating least damage.     

Parameter identification of framed structures using an improved finite element model‐updating method—Part I: formulation and verification

In this study, we formulate an improved finite element model‐updating method to address the numerical difficulties associated with ill conditioning and rank deficiency. These complications are frequently encountered model‐updating problems, and occur when the identification of a larger number of physical parameters is attempted than that warranted by the information content of the experimental data. Based on the standard bounded variables least‐squares (BVLS) method, which incorporates the usual upper/lower‐bound constraints, the proposed method (henceforth referred to as BVLSrc) is equipped with novel sensitivity‐based relative constraints. The relative constraints are automatically constructed using the correlation coefficients between the sensitivity vectors of updating parameters. The veracity and effectiveness of BVLSrc is investigated through the simulated, yet realistic, forced‐vibration testing of a simple framed structure using its frequency response function as input data. By comparing the results of BVLSrc with those obtained via (the competing) pure BVLS and regularization methods, we show that BVLSrc and regularization methods yield approximate solutions with similar and sufficiently high accuracy, while pure BVLS method yields physically inadmissible solutions. We further demonstrate that BVLSrc is computationally more efficient, because, unlike regularization methods, it does not require the laborious a priori calculations to determine an optimal penalty parameter, and its results are far less sensitive to the initial estimates of the updating parameters. Copyright © 2006 John Wiley & Sons, Ltd.     

爆破振动对建筑物影响测试要点

针对爆破振动对建筑物影响的测试方法、测试物理量选择、仪器性能要求、现场测试技术以及数据处理和分析要点等问题进行了较为系统的介绍，可供从事该项工作人员参考。     

绿柱石通道中配合物的振动光谱和辐照裂解

以四川平武富碱型绿柱石为研究对象 ,采用 IR和 L RM测试方法 ,重点对通道中氢化物和多聚合离子的配位构型、辐照裂解及热致转型进行了较深入系统的研究。研究表明 ,在该区成矿作用条件下 ,绿柱石通道中的钠离子趋向与氢离子化合反应生成 Na H氢化物 ,并占据通道中的 C2 位。在垂直 c轴方向上 ,以 3165 cm-1,3114 cm-1及 30 31cm-1伸缩振动弱吸收谱带为特征。[Fe2 ( OH) 4 ] 2 多聚合离子占据通道中的 C1位 ,以 32 34 cm-1伸缩振动锐吸收谱带为特征 (∥ c轴 )。辐照作用导致上述多聚合离子的裂解 ,并形成不稳定的 [H0 ] i心和相对稳定的 [Fe3 ] OH心。与之对应的吸收谱带分别出现在 3110 cm-1(⊥ c轴 )和 335 5cm-1(∥c轴 )处。通道中 Na H和 [Fe2 ( OH) 4 ] 2 多聚合离子的存在 ,可视为该类型绿柱石的一个重要的成因标志。     

An experimental investigation of water level effects on the dynamic behaviour of a large arch dam

The need for full‐scale dynamic tests, which are recognized as the most reliable method to evaluate a structure's vibration properties, is increasing as new analysis techniques are developed that take into account the complex interaction phenomenons that occur in dam–reservoir–foundation systems. They are extremely useful to obtain reliable data for the calibration of newly developed numerical methods. The Earthquake Engineering and Structural Dynamics Research Center (CRGP) at the University of Sherbrooke has been developing and applying dynamic testing methods for large structures in the past 10 years. This paper presents the experimental evaluation of the effects of the varying water level on the dynamic response of the 180 m Emosson arch dam in Switzerland. Repeated forced‐vibration tests were carried out on the dam during four different periods of the reservoir's filling cycle during a one‐year span. Acceleration and hydrodynamic pressure frequency responses were obtained at several locations while the dam was subjected to horizontal harmonic loading. The variation of the resonant frequencies as a function of the reservoir level is investigated. A summary of the ongoing numerical correlation phase with a three‐dimensional finite element model for the dam–reservoir–foundation system is also presented. Copyright © 2001 John Wiley & Sons, Ltd.     

Use of a shared tuned mass damper (STMD) to reduce vibration and pounding in adjacent structures

The dynamic response of tall civil structures due to earthquakes is very important to civil engineers. Structures exposed to earthquakes experience vibrations that are detrimental to their structural components. Structural pounding is an additional problem that occurs when buildings experience earthquake excitation. This phenomena occurs when adjacent structures collide from their out‐of‐phase vibrations. Many energy dissipation devices are presently being used to reduce the system response. Tuned mass dampers (TMD) are commonly used to improve the response of structures. The stiffness and damping properties of the TMD are designed to be a function of the natural frequency of the building to which it is connected. This research involves attaching adjacent structures with a shared tuned mass damper (STMD) to reduce both the structures vibration and probability of pounding. Because the STMD is connected to both buildings, the problem of tuning the STMD stiffness and damping parameters becomes an issue. A design procedure utilizing a performance function is used to obtain the STMD parameters to result in the best overall system response. Copyright © 2001 John Wiley & Sons, Ltd.     

Neuro‐control of seismically excited steel structure through sensitivity evaluation scheme

The neuro‐controller training algorithm based on cost function is applied to a multi‐degree‐of‐freedom system; and a sensitivity evaluation algorithm replacing the emulator neural network is proposed. In conventional methods, the emulator neural network is used to evaluate the sensitivity of structural response to the control signal. To use the emulator, it should be trained to predict the dynamic response of the structure. Much of the time is usually spent on training of the emulator. In the proposed algorithm, however, it takes only one sampling time to obtain the sensitivity. Therefore, training time for the emulator is eliminated. As a result, only one neural network is used for the neuro‐control system. In the numerical example, the three‐storey building structure with linear and non‐linear stiffness is controlled by the trained neural network. The actuator dynamics and control time delay are considered in the simulation. Numerical examples show that the proposed control algorithm is valid in structural control. Copyright © 2001 John Wiley & Sons, Ltd.