Plenty of nothing: Black hole entropy in induced gravity

We demonstrate how Sakharov's idea of induced gravity allows one to explain the statistical-mechanical origin of the entropy of a black hole. According to this idea, gravity becomes dynamical as the result of quantum effects in the system of heavy constituents of the underlying theory.The black hole entropy is related to the properties of the vacuum in the induced gravity in the presence of the horizon. We obtain the Bekenstein-Hawking entropy by direct counting the states of the constituents.     

Biogeographic characterization of Mediterranean and Black Seas faunal provinces using GIS procedures

To identify Mediterranean and Black Seas areas where similar marine faunal provinces occur, geographical distribution maps of 536 species of actual or potential interest to fisheries have been digitized, using GIS software, and three different ecological areas have been delimited by depth, separated by the 200 and 1000 m isobaths. Information on the species ranges was taken mainly from the maps and the texts of the FAO Species Identification Sheets covering the region, and complemented by other sources when necessary. All the distribution maps have then been overlaid by a grid of points at regular intervals every half degree of latitude and longitude. This allowed creation of a matrix of presence or absence of the species at each point from which species richness maps have been generated. The species richness in the Mediterranean proper shows the same negative gradient eastwards that has been observed for nutrients, while the low number of species in the Black Sea could be linked to the fragility and recent fast degradation of this ecosystem. Through the calculation of 65 dissimilarity indices from 50 contiguous points along the coastline and the species richness maps, the region has been divided into nine faunal provinces. These faunal provinces have then been compared with the ten Mediterranean and Black Seas divisions used by the GFCM for statistical purposes, revealing few differences between the two classifications. The definition of faunal provinces in a region when deciding upon Natural Management Areas, and the appropriate GIS approach to be followed, are discussed.     

基于逾渗模型的泥页岩导电机理模拟

泥页岩储层储集空间以纳米/微米级的微孔隙和微裂缝为主,结构复杂,加之干酪根和黏土矿物含量较高,并含有一定量的黄铁矿等导电矿物,造成储层导电机理异于常规储层,岩电实验I-S_w曲线呈现非线性特征,阿尔奇公式等传统评价模型适用性较差.针对上述问题,根据实际岩心实验资料,结合随机算法建立三维逾渗模型并通过数值模拟和超松弛迭代法进行求解,分析泥页岩储层非阿尔奇性产生原因以及泥页岩储层电性的影响因素及规律.模拟结果显示,岩石孔隙拓扑结构和形状尺寸、矿物组成以及地层水电阻率等因素均对泥页岩储层电阻率产生不同程度的影响,通过改变上述因素的设定值,可以建立储层电阻率与各因素的单相关关系,并据此建立修正模型,实现储层含水饱和度的计算.该模型在四川某页岩气产区取得了较好的效果,具有良好的应用前景,为利用逾渗模型模拟方法解决油田勘探开发中的复杂问题提供了新思路.     

相邻两井对大地震的不同水力响应模型研究——页岩影响分析

大地震引起了左家庄和宝坻(相距～50km)两井中截然不同的同震水位响应.我们用水位的气压和潮汐响应来分析解释此现象.结果表明,宝坻井的观测含水层中存在页岩,且此井受裂隙影响很大,储水效应较差.页岩的复杂裂隙或者各向异性可能会导致此井观测含水层处于半封闭状态,从而导致垂直向排水的发生.通过多方计算分析后,我们将这两口井划分为两种模型—1.水平流动模型;2.水平流动+垂直流动的混合流动模型.由于裂隙影响,宝坻井的观测含水层介质与外界的水力沟通性在震前就较强(震前渗透率就比较大),所以宝坻井观测含水层与外界的孔隙压差异较小,导致同震渗透率上升较小甚至没有变化,这些因素是导致该井同震水位变化幅度总是非常微小的原因.     

Mesozoic–Cenozoic stress field magnitude in Sichuan Basin,China and its adjacent areas and the implication on shale gas reservoir: Determination by acoustic emission in rocks

The Sichuan Basin is one of the vital basins in China, boasting abundant hydrocarbon reservoirs. To clarify the intensity of the tectonic stress field of different tectonic episodes since the Mesozoic and to identify the regional dynamic background of different tectonic movements in the Sichuan Basin and its adjacent areas, the characteristics of the acoustic emission in rocks in different strata of these areas were researched in this paper. Meanwhile, the tectonic stress magnitude in these areas since the Mesozoic was restored. The laws state that the tectonic stress varied with depth was revealed, followed by the discussion of the influence of structural stress intensity on structural patterns in different tectonic episodes. These were conducted based on the paleostress measurement by acoustic emission method and the inversion principle of the stress fields in ancient periods and the present, as well as previous research achievements. The results of this paper demonstrate that the third episode of Yanshanian Movement (Yanshanian III) had the maximum activity intensity and tremendously influenced the structural pattern in the study area. The maximum horizontal principal stress of Yanshanian III varied with depth as follows: 0.0168 x + 37.001 (MPa), R² = 0.8891. The regional structural fractures were mainly formed in Yanshanian III in Xujiahe Formation, west Sichuan Basin, of which the maximum paleoprincipal stress ranging from 85.1 MPa to 120.1 MPa. In addition, the law stating the present maximum horizontal principal stress varies with depth was determined to be 0.0159 x+10.221 (MPa), R²=0.7868 in Wuling Mountain area. Meanwhile, it was determined to be 0.0221 x+9.4733 (MPa), R²=0.9121 in the western part of Xuefeng Mountain area and 0.0174 x+10.247 (MPa), R²=0.8064 in the whole study area. These research results will not only provide data for the simulation of stress field, the evaluation of deformation degree, and the prediction of structural fractures, but also offer absolute geological scientific bases for the elevation of favorable shale gas preservation.     

Jurassic source rocks in the Vienna Basin (Austria): Assessment of conventional and unconventional petroleum potential

The Upper Jurassic marlstones (Mikulov Fm.) and marly limestones (Falkenstein Fm.) are the main source rocks for conventional hydrocarbons in the Vienna Basin in Austria. In addition, the Mikulov Formation has been considered a potential shale gas play. In this paper, organic geochemical, petrographical and mineralogical data from both formations in borehole Staatz 1 are used to determine the source potential and its vertical variability. Additional samples from other boreholes are used to evaluate lateral trends. Deltaic sediments (Lower Quarzarenite Member) and prodelta shales (Lower Shale Member) of the Middle Jurassic Gresten Formation have been discussed as secondary sources for hydrocarbons in the Vienna Basin area and are therefore included in the present study.The Falkenstein and Mikulov formations in Staatz 1 contain up to 2.5 wt%TOC. The organic matter is dominated by algal material. Nevertheless, HI values are relative low (<400 mgHC/gTOC), a result of organic matter degradation in a dysoxic environment. Both formations hold a fair to good petroleum potential. Because of its great thickness (∼1500 m), the source potential index of the Upper Jurrasic interval is high (7.5 tHC/m²). Within the oil window, the Falkenstein and Mikulov formations will produce paraffinic-naphtenic-aromatic low wax oil with low sulfur content. Whereas vertical variations are minor, limited data from the deep overmature samples suggest that original TOC contents may have increased basinwards. Based on TOC contents (typically <2.0 wt%) and the very deep position of the maturity cut-off values for shale oil/gas production (∼4000 and 5000 m, respectively), the potential for economic recovery of unconventional petroleum is limited. The Lower Quarzarenite Member of the Middle Jurassic Gresten Formation hosts a moderate oil potential, while the Lower Shale Member is are poor source rock.     

Controls of hydrocarbon generation on the development of expulsion fractures in organic-rich shale: Based on the Paleogene Shahejie Formation in the Jiyang Depression,Bohai Bay Basin,East China

The development of expulsion fractures in organic-rich shale is closely related to hydrocarbon generation and expulsion from kerogen. Organic-rich shales from the upper part of the fourth member and the lower part of the third member of the Paleogene Shahejie Formation in the Jiyang Depression, Bohai Bay Basin, East China, are used as an example. Based on thin sections, SEM and thermal simulation experiments, the characteristics of hydrocarbon generation and the conditions supporting the development of expulsion fractures were explored. The key factors influencing these fractures include the presence of kerogens, their distribution along laminae and around particle boundaries, their exposure to heat and the build-up in pressure due to confinement by low permeability. The development of excess pore fluid pressures and intrinsic low rock fracture strength are the main influencing factors. Pressurization by rapid generation of hydrocarbon provides impetus for fracture initiation and cause bitumen to migrate quickly. The shale laminae results in distinctly lower fracture strength laminae-parallel than laminae-normal and this directs the formation of new fractures in the direction of weakness. When pore fluid pressure increases, maximum and minimum principal effective stresses decrease by different proportions with a larger reduction in the maximum principal effective stress. This increases the deviatoric stress and reduces the mean stress, thus driving the rock towards failure. Moreover, the tabular shape of the kerogen aids the generation of hydrocarbon and the initiation of expulsion fractures from the tip and edge. The resulting fractures extend along the laminae when the tensile strength is lower in the vertical direction than in the horizontal direction. Particle contact boundaries are weak and allow fractures to expand around particles and to curve as the stress/strength regime changes. When pore fluid pressure fields at different fracture tips overlap, fractures will propagate and interconnect, forming a network. This paper could provide us more detailed understanding of the forming processes of expulsion fractures and better comprehension about hydrocarbon expulsion (primary migration) in source rocks.     

The Adaptive Marine Policy (AMP) toolbox: Supporting policy-makers developing adaptive policies in the Mediterranean and Black Sea

Adaptive management is essential to the practical application of the Ecosystem-Based Approach (EBA). Despite there are frequent assertions that adaptive management is being used, evidence on its success is still limited. Indeed, it is difficult to bring the different elements of adaptive management together in a robust way and to choose the appropriate tools to do it. Therefore, it is necessary to provide a practical framework for adaptive policy action, consistent with the EBA. Accordingly, to operationalize the design and implementation of adaptive policies on the basis of the EBA, the Adaptive Marine Policy toolbox has been developed. The objective of the toolbox is to provide policy-makers a practical framework to design and implement adaptive policies. To show the functionality of the toolbox, the guidelines and resources provided within the toolbox have been applied to the marine litter issue in the Mediterranean and Black Sea as an example. The example application has shown that the toolbox is a useful and operational framework to build a science-policy interface according to the EBA. Despite some resources could be missing from the toolbox, they provide a practical and useful starting point to support the application of the different steps and key activities.     

Simulation of paleotectonic stress fields and quantitative prediction of multi-period fractures in shale reservoirs: A case study of the Niutitang Formation in the Lower Cambrian in the Cen'gong block,South China

Reservoirs where tectonic fractures significantly impact fluid flow are widespread. Industrial-level shale gas production has been established from the Lower Cambrian Niutitang Formation in the Cen'gong block, South China; the practice of exploration and development of shale gas in the Cen'gong block shows that the abundance of gas in different layers and wells is closely related to the degree of development of fractures. In this study, the data obtained from outcrop, cores, and logs were used to determine the developmental characteristics of such tectonic fractures. By doing an analysis of structural evolution, acoustic emission, burial history, logging evaluation, seismic inversion, and rock mechanics tests, 3-D heterogeneous geomechanical models were established by using a finite element method (FEM) stress analysis approach to simulate paleotectonic stress fields during the Late Hercynian—Early Indo-Chinese and Middle-Late Yanshanian periods. The effects of faulting, folding, and variations of mechanical parameters on the development of fractures could then be identified. A fracture density calculation model was established to determine the quantitative development of fractures in different stages and layers. Favorable areas for shale gas exploration were determined by examining the relationship between fracture density and gas content of three wells. The simulation results indicate the magnitude of minimum principal stress during the Late Hercynian — Early Indo-Chinese period within the Cen'gong block is −100 ∼ −110 MPa with a direction of SE-NW (140°–320°), and the magnitude of the maximum principal stress during the Middle-Late Yanshanian period within the Cen'gong block is 150–170 MPa with a direction of NNW-SSE (345°–165°). During the Late Hercynian — Early Indo-Chinese period, the mechanical parameters and faults play an important role in the development of fractures, and fractures at the downthrown side of the fault are more developed than those at the uplifted side; folding plays an important role in the development of fractures in the Middle-Late Yanshanian period, and faulting is a secondary control. This 3-D heterogeneous geomechanical modelling method and fracture density calculation modelling are not only significant for prediction of shale fractures in complex structural areas, but also have a practical significance for the prediction of other reservoir fractures.     

High resolution characterization of a core from the Lower Jurassic Gordondale Member,Western Canada Sedimentary Basin

The Gordondale Member is a hydrocarbon source rock and potential unconventional reservoir that extends across northeastern British Columbia and central-northwestern Alberta. It is an organic-rich, calcareous, fossiliferous mudstone with a median total organic carbon value of 6.0 wt%. A total of 230 samples were collected from approximately 25 m of Gordondale Member core for organic matter analysis using Rock-Eval 6 analysis and organic petrology. Detailed core logging provides sedimentological context for organic matter characterization. The predominant organic material in the samples is solid bitumen and liptinite with lesser zooclast and inertinite. Most kerogen is Type II, autochthonous marine biomass, with minimal dilution by inert organic carbon. Rock-Eval T_max values and random reflectance measurements of solid bitumen indicate the samples are within the oil generation window. Solid bitumen contributes a substantial amount of hydrocarbon potential to the interval. A micro-reservoir structure within the core is produced by thin intervals of impermeable displacive calcite that act as barriers to the upward migration of free hydrocarbons. These free hydrocarbon accumulations could make excellent targets for horizontal wells within the Gordondale Member.