沉降-时间曲线呈“S”型的证明

从一维固结理论出发，严格证明了在线性加载或近似线性加载情况下（这和工程实际加载相类似），沉降-时间曲线呈“S”型。     

考虑渗流力时对太沙基一维固结理论的修正

考虑渗流力的作用，对太沙基一维固结理论进行了修正，给出了向上及向下渗流时固结度的表达式，并分析了固结过程中渗流应力的变化规律。结果表明：渗流力对固结度的影响较大，特别是在时间因素Tv=0.1附近，是否考虑渗流力的影响将导致固结度的差值达30 %，因而渗流力对固结度的影响是不可忽略的。     

承压水减压引起的沉降分析

由下卧承压水层减压引起的固结沉降计算与一般的由堆载或潜水位下降引起的固结沉降计算不同,本文着重研究了在深厚弱透水层下卧强透水承压层的复杂地质条件下,下卧承压水层减压引起的土中应力变化及周围地表沉降的计算方法;在假定一维竖向固结的条件下推导了减压引起的沉降固结度计算公式,该公式与常规的双向排水固结公式相同,表明排水减压固结与常规的双向排水固结有着相同的效果.最后,将此分析方法应用于潮州供水枢纽工程西溪水闸沉降分析中,实践的结果表明,该方法简单可行,能较好地满足工程要求.     

深层水泥土搅拦桩在软土地基处理中的应用

通过对深层水泥土搅拌桩的加固机理及复合地基承载力性状的简要分析,根据国家现行规范,结合具体地基处理工程实例,对深层水泥搅拌桩在软土地区地基加固处理中的方案选择、设计、施工及检测中的常见技术要点作初步探讨。     

Low-order stabilized finite element for the full Biot formulation in soil mechanics at finite strain

This article presents a novel finite element formulation for the Biot equation using low-order elements. Additionally, an extra degree of freedom is introduced to treat the volumetric locking steaming from the effective response of the medium; its balance equation is also stabilized. The accuracy of the proposed formulation is demonstrated by means of numerical analyses.     

Semi‐analytical solution to one‐dimensional consolidation for unsaturated soils with semi‐permeable drainage boundary under time‐dependent loading

This paper presents semi‐analytical solutions to Fredlund and Hasan's one‐dimensional consolidation of unsaturated soils with semi‐permeable drainage boundary under time‐dependent loadings. Two variables are introduced to transform two coupled governing equations of pore‐water and pore‐air pressures into an equivalent set of partial differential equations, which are easily solved by the Laplace transform. The pore‐water pressure, pore‐air pressure and settlement are obtained in the Laplace domain. Crump's method is adopted to perform the inverse Laplace transform in order to obtain semi‐analytical solutions in time domain. It is shown that the present solutions are more general and have a good agreement with the existing solutions from literatures. Furthermore, the current solutions can also be degenerated into conventional solutions to one‐dimensional consolidation of unsaturated soils with homogeneous boundaries. Finally, several numerical examples are provided to illustrate consolidation behavior of unsaturated soils under four types of time‐dependent loadings, including instantaneous loading, ramp loading, exponential loading and sinusoidal loading. Parametric studies are illustrated by variations of pore‐air pressure, pore‐water pressure and settlement at different values of the ratio of air–water permeability coefficient, depth and loading parameters. Copyright © 2017 John Wiley & Sons, Ltd.     

Analytical modeling on consolidation of stiffened deep mixed column-reinforced soft soil under embankment

Stiffened deep mixed (SDM) column is a new ground improvement technique to improve soft soil, which can be used to increase bearing capacity, reduce deformation, and enhance stability of soft soil. This technique has been successfully adopted to support the highway and railway embankments over soft soils in China and other countries. However, there have been limited investigations on its consolidation under embankment loading. This paper developed an analytical solution for the consolidation of embankment over soft soil with SDM column in which core pile is equal to or shorter than outer DM column. The consolidation problem was simplified as a consolidation of composite soil considering the load shear effect of core pile. The developed solution was verified by a comparison with the results computed by three-dimensional (3-D) finite element analysis. A parametric study based on the derived solution was conducted to investigate influence factors—length of core pile, diameter of core pile, diameter of SDM column, modulus of DM column, and permeability coefficient of DM column—on the consolidation behavior of SDM column-supported embankment over soft soil. The developed solution was applied to a case history of SDM column-supported embankment, and a good agreement was found between the predictions and the field measurements.     

A bounding surface model for anisotropically overconsolidated clay incorporating thermodynamics admissible rotational hardening rule

A bounding surface model is formulated to simulate the behavior of clays that are subject to an anisotropic consolidation stress history. Conventional rotational hardening is revisited from the perspective of thermodynamics. As the free energy cannot be accumulated infinitely upon critical state failure, the deviatoric back stress must vanish. This requires the rotated yield surface to be turned back to eventually align on the hydrostatic axis in the stress plane. Noting that most of the previous propositions violate this restriction, an innovative rotational hardening rule is formulated that is thermodynamically admissible. The bounding surface framework that employs the modified yield surface is applied to simulate elastoplastic deformations for overconsolidated clays, with which the overprediction of strength on the “dry” side can be greatly improved with reasonable results. Other important features, including contractive or dilative response and hardening or softening behavior, can also be well-captured. It has been shown that the model can simulate three types of reconstituted clays that are sheared with initial conditions over a wide range of anisotropic consolidation stress ratios and overconsolidation ratios under both triaxial undrained and drained conditions. Limitations and potential improvement of the model regarding the fabric anisotropy at critical state have been discussed.     

One-dimensional consolidation of soil under multistage load based on continuous drainage boundary

In engineering practice, a rapid loading rate can result in ground failure when the strength of soft soils is relatively low, and a multistage loading scheme is always utilized to deal with this situation. Firstly, under a multistage load and the continuous drainage boundary, an analytical solution of excess pore-water pressure and consolidation degree is obtained by virtue of the superposition formula of excess pore-water pressure, and a more general continuous drainage boundary under arbitrary time-dependent load is developed. Then, a comparison with existing analytical solutions is conducted to verify the present solution. A preliminary attempt on applying the continuous drainage boundary into the finite element model is made, and the feasibility of the numerical model for the one-dimensional consolidation under the continuous drainage boundary is verified by comparing the results calculated by FEM with that from present analytical solution. Finally, the consolidation behavior of soil is investigated in detail for different int erface parameters or loading scheme. The results show that, in land reclamation projects, a horizontal drain should be placed close to the boundary with a smaller interface parameter to improve the consolidation efficiency. The degree of consolidation is also related to the applied time-dependent load and interface parameters.