Nonlinear aspects of energy dissipation in wood-panel joints

The joints connecting vertical and horizontal elements are the "weak link" in structural systems assembled from wood panels. If they are too weak, local failures may occur, resulting in performance that is significantly below expectations. If they are too resistant, the joints may be unable to dissipate energy during vibrations, thus possibly initiating a fast progressive failure. This paper re-processes and re-elaborates the results of shaking table tests previously carried out by the author and other co-workers. The goal is to assess the feasibility of a joint which is able to dissipate energy during vibration, without degrading the connection performance.     

A generalized conditional intensity measure approach and holistic ground‐motion selection

A generalized conditional intensity measure (GCIM) approach is proposed for use in the holistic selection of ground motions for any form of seismic response analysis. The essence of the method is the construction of the multivariate distribution of any set of ground‐motion intensity measures conditioned on the occurrence of a specific ground‐motion intensity measure (commonly obtained from probabilistic seismic hazard analysis). The approach therefore allows any number of ground‐motion intensity measures identified as important in a particular seismic response problem to be considered. A holistic method of ground‐motion selection is also proposed based on the statistical comparison, for each intensity measure, of the empirical distribution of the ground‐motion suite with the ‘target’ GCIM distribution. A simple procedure to estimate the magnitude of potential bias in the results of seismic response analyses when the ground‐motion suite does not conform to the GCIM distribution is also demonstrated. The combination of these three features of the approach make it entirely holistic in that: any level of complexity in ground‐motion selection for any seismic response analysis can be exercised; users explicitly understand the simplifications made in the selected suite of ground motions; and an approximate estimate of any bias associated with such simplifications is obtained. Copyright © 2010 John Wiley & Sons, Ltd.     

Internal erosion of chemically reinforced granular materials: a mathematical modeling approach

Internal erosion (IE) affects the stability of natural and reinforced materials by causing instability within their granular structure. The dislodgement and transport of eroded particles affect both the particulate concentration of eroding fluid and the pore network of eroded material. In this study, we examined these modifications using a transport model with a finite element code. First, IE tests on chemically reinforced sand columns were performed to obtain information about eroded material loss of mass, particulate concentration of effluent, porosity and permeability modifications, and existing IE stages. Second, based on experimental results, a mathematical one‐dimensional model has been formulated to monitor the evolution and spatial distribution of erodible solids, fluidized particles, porosity, permeability, and seepage stresses. The model consists of a set of coupled nonlinear differential equations solved in sequence. It provides valuable information about the extent and the dynamics of structural changes, which can be used to estimate an IE time for the hydraulic work to reach failure. Copyright © 2011 John Wiley & Sons, Ltd.     

A comparison of fibre‐optic distributed temperature sensing to traditional methods of evaluating groundwater inflow to streams

There are several methods for determining the spatial distribution and magnitude of groundwater inputs to streams. We compared the results of conventional methods [dye dilution gauging, acoustic Doppler velocimeter (ADV) differential gauging, and geochemical end‐member mixing] to distributed temperature sensing (DTS) using a fibre‐optic cable installed along 900 m of Ninemile Creek in Syracuse, New York, USA, during low‐flow conditions (discharge of 1·4 m³ s^?1). With the exception of differential gauging, all methods identified a focused, contaminated groundwater inflow and produced similar groundwater discharge estimates for that point, with a mean of 66·8 l s^?1 between all methods although the precision of these estimates varied. ADV discharge measurement accuracy was reduced by non‐ideal conditions and failed to identify, much less quantify, the modest groundwater input, which was only 5% of total stream flow. These results indicate ambient tracers, such as heat and geochemical mixing, can yield spatially and quantitatively refined estimates of relatively modest groundwater inflow even in large rivers. DTS heat tracing, in particular, provided the finest spatial characterization of groundwater inflow, and may be more universally applicable than geochemical methods, for which a distinct and consistent groundwater end member may be more difficult to identify. Copyright © 2011 John Wiley & Sons, Ltd.     

Laboratory simulation of natural leaching processes of eastern USA oil shale

Raw and retorted spent oil shales from Kentucky, as well as soil and overburden materials, were subjected to laboratory and field leaching tests. Standard batch leaching tests grossly undervalue the amount of dissolved ions as measured in the field, being too brief to enable slow reactions of the mineral matrix, such as hydrolysis and oxidation of sulfides or reactions of acidic leachates with soluble components of the clays. Laboratory column tests, devised to closely simulate natural leaching processes, achieved concentration levels and elemental release patterns similar to those found in field tests. The column tests provide a reliable means to assess the leachability of metals in these materials.     

The impact of the Laacher See Volcano (11 000 yr B.P.) on terrestrial vegetation and diatoms

Late-glacial lake sediments containing the Laacher See Tephra (LST, 11 000 yr B.P.) have been analyzed for their pollen and diatom content at three sites at varying distances from the volcano and on different bedrock geologies. The aim was to test the null hypothesis that this major volcanic eruption had no effect on terrestrial pollen or aquatic diatom assemblages. The pollen spectra at all sites show a short-lived increase in grass pollen following the LST. Partial redundancy analysis and associated Monte Carlo permutation tests suggest, however, that the LST had no statistically significant effect at two sites but it had a statistically significant impact on the pollen assemblages at the site nearest (60 km) to the volcano.The diatom assemblages at the three sites changed individualistically after the LST deposition, with increases inAchnanthes minutissima at one site, an expansion ofAulacoseira species at another, and an increase ofAsterionella formosa andFragilaria brevistriata at the third site. Partial redundancy analysis and associated permutation tests suggest a statistically significant change in diatoms in relation to the LST and associated changes in sediment lithology at the one site situated on acidic bedrock. No significant impacts were found at the sites on volcanic or calcareous rocks. Due to the interaction between tephra and sediment lithology, it is not possible to conclude if the statistically significant diatom changes were a direct result of the LST deposition or an indirect result of lithological changes following LST deposition.This is the first paper in a series of papers published in this issue on high-resolution paleolimnology. These papers were presented at the Sixth International Paeolimnology Symposium held 19–21 April, 1993 at the Australian National University, Canberra, Australia. Dr A. F. Lotter and Dr. M. Sturm served as guest editors for these papers.     

Determination of shear strength of conglomerates using a caterpillar D9 ripper and comparison with alternative methods

Summary A method of determining shear strength in Gila Conglomerates at Inspiration Mine (now Cyprus Miami Mine), Arizona, using Caterpillar D9H and D9L rippers is described. The results are compared with data obtained using laboratory direct shear tests — both large and small scale, back analysis and boulder modelling. The significance of scale, particularly relating to boulder size is discussed.     

Performance of surface footing on geocell-reinforced soft clay beds

This paper presents the results of laboratory model tests carried out to develop an understanding of the behaviour of geocell-reinforced soft clay foundations under circular loading. Natural silty clay was used in this study. The geocells were prepared using biaxial polymer grid. The performance of the reinforced bed is quantified using non-dimensional factors i.e., Bearing capacity improvement factor (I_f) and Percentage reduction in footing settlement (PRS). The test results demonstrate that the geocell mattress redistributes the footing load over a wider area thereby improving the performance of the footing. The load carrying capacity of the clay bed is increased by a factor of up to about 4.5 times that of unreinforced bed. From the pressure-settlement responses, it is observed that the geocell-reinforced foundation bed behaves as a much stiffer system compared to the unreinforced case indicating that a substantial reduction in footing settlement can be achieved by providing geocell reinforcement in the soft clay bed. The maximum reduction in footing settlement obtained with the provision of geocell mattress of optimum size placed close to the footing is around 90%. Further improvement in performance is obtained with provision of an additional planar geogrid layer at the base of the geocell mattress.     

Epikarst communities: biodiversity hotspots and potential water tracers

There is an exceptionally rich aquatic fauna in the epikarst, the skin of karst. High species richness in the epikarst, coupled with its special vulnerability as the first point of entry of nearly all toxic spills, makes its protection especially important. The epikarst fauna may also be an useful tool in tracing the potential route of pollutants. Copepods in epikarst have extremely local distributions, and their body size is such that they are largely at the mercy of directional flows. In a series of caves in southwest Slovenia and West Virginia, a significant fraction of the copepod species occur in less than 100 m of linear extent. This suggests a pattern of highly restricted lateral flow under normal conditions and the distribution of copepods could potentially be used to trace water movement. Under high flow conditions as would often be the case with toxic spill, mounding of water may increase the lateral radius of flow. Nevertheless, copepods may be useful tracers.