A Physical and Numerical Investigation on the Stability of Shallow Tunnels in Strain Softening Media

Summary The behaviour up to failure of shallow underground openings is discussed on the basis of some laboratory, small-scale model tests and of finite element simulation. The experimental results are first illustrated. They were obtained from two-dimensional (plane strain) and three-dimensional tunnel models tested under standard gravity conditions. Then, the phenomenon of strain localisation that characterizes the medium surrounding the model tunnels is discussed, recalling two alternative approaches for its numerical interpretation. On this basis, a finite element procedure for strain softening analyses is outlined and applied to the simulation of the tests in both two- and three-dimensional conditions. The comparison between experimental and numerical results leads to some conclusions on the influence of strain localisation on the overall behaviour of shallow tunnels and on the stability of their headings.     

Strain accumulation in sand due to cyclic loading: drained triaxial tests

Our aim is the prediction of the accumulation of strain and/or stress under cyclic loading with many (thousands to millions) cycles and relatively small amplitudes. A high-cycle constitutive model is used for this purpose. Its formulas are based on numerous cyclic tests. This paper describes drained tests with triaxial compression and uniaxial stress cycles. The influence of the strain amplitude, the average stress, the density, the cyclic preloading history and the grain size distribution on the direction and the intensity of strain accumulation is discussed.     

Determining the maximum degree of harmonic coefficients in geopotential models by Monte Carlo methods

Random errors for the harmonic coefficients of a geopotential model are generated from the matrix of normal equations by a parallel computer applying the Gibbs sampler. This leads to random values for the harmonic coefficients. They are transformed by nonlinear, quadratic transformations to random values for the square roots of degree variances, of mean squares of geoid undulations and gravity anomalies. The expected values of these quantities are not equal to the values of these quantities computed by the estimated harmonic coefficients, due to correlations and errors in the estimation. By hypothesis tests estimated harmonic coefficients distorted by correlations and errors are detected. Applying the tests to the geopotential model ITG-CHAMP01 of the Institute of Theoretical Geodesy in Bonn it is concluded that above the degree 62 the harmonic coefficients cannot add any information to the geopotential model.     

Analysis of pressuremeter geometry effects in clay using critical state models

The conventional interpretation methods of pressuremeter testing effectively approximate pressuremeter membranes as infinitely long. As a result, the effects of the two‐dimensional geometry of pressuremeters are ignored, leading to an overestimation of soil shear strength by pressuremeter testing, as demonstrated in several previous studies. This paper presents results of a numerical study of two‐dimensional geometry effects on self‐boring pressuremeter tests in undrained clay. The results are obtained using critical state soil models with an effective stress formulation. This is in contrast to most (if not all) existing studies on pressuremeter geometry effects, which were based on perfectly plastic soil models (e.g. Yu (Cavity expansion theory and its application to the analysis of pressuremeters. DPhil Thesis, The University of Oxford, 1990), Yeung and Carter (Proc. 3rd Int. Symp. on Pressuremeters, 1990), and Houlsby and Carter (Géotechnique, 1993; 43 (4):567–576)). The present study suggests that the overestimation of soil strength due to the neglect of finite pressuremeter length is significantly affected by the soil model used in the calculations. It is found that for clays with a high overconsolidation ratio (OCR) the strength overestimation predicted using critical state soil models could be considerably smaller than that predicted using perfectly plastic soil models. The main conclusion of this numerical study is that care must be exercised before directly applying any numerically determined pressuremeter geometry correction factors in practice. Copyright © 2005 John Wiley & Sons, Ltd.     

粉状煤系土的物理力学特性

采用不同天气下的原位及室内试验方法,对广东云浮地区粉状煤系土的工程地质性质进行了测试,系统研究了煤系土的物理力学特性,重点论述了粉状煤系土不同干密度、不同含水率下抗剪强度和现场静力触探比贯入阻力的变化规律,提出了粉状煤系土的多项强度指标,建立了具有实用参考价值的经验性公式。研究结果为合理评价粉状煤系土的特性、路基处理和边坡处治提供理论依据,具有一定的实际意义。     

A Review of the IAG GeoPT™ and Certification Programmes,their Protocols,and the Differences between the Original and Potential Modifications to the Certification Protocol

The IAG conducts two programmes, the GeoPT ^? proficiency test and a certification programme that are closely interconnected. Both support the quality control/quality assurance activities of geochemical laboratories. Each derives an estimate of ‘true value’ for a number of samples, but arrives at that estimate, and its uncertainty, differently. This review discusses the history of the two programmes and compares the ‘true values’ and their uncertainties obtained through each. It then considers ‘fitness‐for‐purpose’ issues related to both GeoPT ^? and certification uncertainties. Issues related to potential modification of the IAG protocol for certification are also considered.     

铁路路基粗粒土填料临界动应力试验研究

粗粒土填料被广泛应用于铁路基床填料中,直接承受轨道结构传递的列车动循环荷载的长期作用,研究其在列车动荷载作用下的动力行为特征及塑性变形特性可为路基状态评估、沉降控制提供思路。采用GDS动三轴试验系统对铁路基床表层的粗粒土填料动力响应开展研究,通过引入塑性应变率和安定理论,将不同频率、围压、循环动应力比等条件下路基填料的轴向塑性应变的发展规律划分为塑性安定、塑性蠕变和增量塑性破坏3种类型,并确定了塑性安定和塑性蠕变状态的临界动应力水平。研究表明:粗粒土填料的临界循环应力比随着围压的增大而增大,随着荷载频率的增加而减小。通过对试验结果的拟合分析,提出了以围压为变量的临界动应力经验公式,为合理评估列车荷载作用下路基任意深度的动力稳定提供了理论依据。     

Three dimensional numerical simulation of residential building on shrink–swell soils in response to climatic conditions

Shrink–swell soils can cause distresses in buildings, and every year, the economic loss associated with this problem is huge. This paper presents a comprehensive system for simulating the soil–foundation–building system and its response to daily weather conditions. Weather data include rainfall, solar radiation, air temperature, relative humidity, and wind speed, all of which are readily available from a local weather station or the Internet. These data are used to determine simulation flux boundary conditions. Different methods are proposed to simulate different boundary conditions: bare soil, trees, and vegetation. A coupled hydro‐mechanical stress analysis is used to simulate the volume change of shrink–swell soils due to both mechanical stress and water content variations. Coupled hydro‐mechanical stress‐jointed elements are used to simulate the interaction between the soil and the slab, and general shell elements are used to simulate structural behavior. All the models are combined into one finite element program to predict the entire system's behavior. This paper first described the theory for the simulations. A site in Arlington, Texas, is then selected to demonstrate the application of the proposed system. Simulation results are shown, and a comparison between measured and predicted movements for four footings in Arlington, Texas, over a 2‐year period is presented. Finally, a three‐dimensional simulation is made for a virtual residential building on shrink–swell soils to identify the influence of various factors. Copyright © 2015 John Wiley & Sons, Ltd.