地基沉降预测模型的正则化算法

通过分析地基沉降预测模型,指出最小二乘的病态性会导致模型参数求解失败。应用正则化理论,基于矩阵求逆理论,提出了一种沉降预测模型参数的正则化无偏估计算法,说明了新算法的无偏性和方差最小性。在一定条件下,证明了新算法中正则参数的存在性,并给出了正则参数的计算公式。结合文献和工程实例进行的分析表明,新算法降低了矩阵条件数,减轻矩阵病态程度,能有效求得地基沉降预测模型参数。     

建设项目大气环境影响评价的Fuzzy综合评判方法

本文将Fuzzy综合评判方法应用于建设项目的大气环境影响评价,并通过与其它评价方法的比较,说明Fuzzy综合评判方法在建设项目大气环境影响评价中的可行性和客观性。     

基于自适应参数估计的多时相遥感图像变化检测

提出一种基于自适应参数估计实现多时相遥感图像的变化检测算法.首先应用分层Markov随机场模型建立多时相差分图像的统计模型;然后通过非监督的迭代自适应参数估计实现差分图像的分类,从而检测出变化的像元.在每次参数估计过程中,先将上次估计出的参数用于最大后验估计实现差分图像的分类,然后根据分类结果再对参数进行修正,并将修正后的参数用于下一次迭代分类,如此循环迭代,能够自适应地完成差分图像的参数估计与分类.     

饱和冻土中弹性体波传播特性影响参数研究

基于Leclaire对饱和双相孔隙弹性介质Biot模型的扩展,研究含有两种不同固相组分的三相多孔弹性介质中体波的传播特性。以饱和冻土为例,分析了各相体积分数、颗粒形状,接触参数等因素对波动方程中惯性参数、黏性参数、刚度参数的影响;对该三相介质模型进行了退化,分析了孔隙中只含液态水或固态冰时体波的特性;以饱和冻土为例,通过数值计算,探讨了饱和冻土中体波的相速度和衰减系数与胶结参数、接触参数、频率、饱和度、孔隙率等参数的关系。结果表明：与一般的饱和土不同,饱和冻土中存在5种体波,即3种纵波和2种横波;5种体波均具有弥散性和衰减性,且P1波、S1波弥散性和衰减性远小于P2、P3、S2波;胶结参数、饱和度、孔隙率对5种体波的传播特性影响显著,接触参数对传播特性影响较小。     

Changing grading of soil: effect on critical states

Examples of situations are presented where the grading of a soil changes during its lifetime either by crushing of particles leading to an increase of fine material or by slow transport of fine particles with seepage leading to a decrease of fine material. Such grading changes influence the basic constitutive properties of the soil, in particular properties such as critical states which are dependent on the available range of densities of packing. Discrete element modelling is used to show the dependence of critical state conditions on grading and the way in which the particle assembly seeks out new critical state conditions as the grading changes.     

Strain-related differences in the crystal growth of white mica and chlorite: a TEM and XRD study of the development of metapelitic microfabrics in the Southern Uplands thrust terrane, Scotland

Abstract TEM and XRD techniques were used to study crystal growth characteristics of the fabric-forming phyllosilicates which developed in response to low-grade metamorphism and tectonic imbrication in part of the Southern Uplands thrust terrane. Prograde regional metamorphism, ranging from late diagenesis through the anchizone to the epizone, was accompanied by the development of a slaty cleavage which is commonly bedding-parallel. TEM-measured mean thicknesses of white mica and chlorite crystallite populations increase with advancing grade and correlate with XRD-measured crystallinity indices. Analytical TEM data show that prograde changes in composition lead to a net loss of Si, Ca and minor Fe from the fabric-forming phyllosilicates. White micas are paragonite-poor phengites with a mean b lattice parameter of 9.037 Å, and indicate an intermediate pressure series of metamorphism with a field gradient of <25° C km^-1. Chlorite compositions evolved from diabantite (with intergrown corrensite) to ripidolite over an estimated temperature range of 150–320° C. Field gradient and temperature estimates suggest that crystal growth and fabric development occurred at burial depths ranging from 6 km to at least 13 km in the thrust terrane. During late diagenesis, crystal growth of white mica and chlorite was predominantly a consequence of polytypic and phase transitions, and resulted in similar size distributions which resemble typical Ostwald ripening curves. Under anchizonal and epizonal conditions, white mica grew more rapidly than chlorite because of its greater ability to store strain energy and recover from subgrain development; as a result crystal thickness distributions are not typical of Ostwald ripening. In contrast, chlorite crystals which grew under these conditions developed subgrain boundaries at high strain rates which were only partially recovered at low strain rates; these retained dislocations reduce the crystallite thicknesses detected by TEM and XRD, compared with those of white mica. These differences in strain-induced crystal growth indicate that white mica (illite) and chlorite crystallinity indices are likely to show significant differences where low-grade metamorphism is closely associated with tectonic fabric development.     

甘油二醚膜类脂化合物的生物地球化学研究进展

甘油二醚膜类脂化合物相对其他类脂生物标志物而言,通常具有较特定的微生物来源及环境指示意义,目前国内外还未有相关的综述性报道。综述了该类型化合物的测试方法,古菌和细菌二醚的组成特征,重点评述了如产甲烷菌、甲烷氧化菌、嗜盐菌等古菌,以及硫酸盐还原菌、Aquificales及一些嗜热细菌,在极端环境(如冷泉、热泉、热液系统)研究中甘油二醚膜类脂化合物应用的进展和可能经历的生物地球化学过程。简要介绍了环境对甘油二醚膜类脂分布的影响,并对其及其他类脂生物标志物的应用前景和发展趋势进行了展望。     

利用现有重力场模型求定CHAMP卫星加速度计修正参数

CHAMP卫星加速度计数据的标定是通过确定其尺度因子和偏差参数来完成的.本文基于能量守恒方程,给出利用现有重力场模型标定CHAMP卫星加速度数据的基本原理和数学模型;提出相邻历元间差分算法,大大简化了观测方程,同时避免积分常量的计算.该算法既能同时解算尺度因子和偏差参数,也可任意求解其中之一.基于实测的CHAMP卫星加速度数据,利用EGM96模型和最新公布的EIGEN-2模型进行计算与比较,验证该方法的有效性.     

基于MODE对模式预报强风风场的检验分析

基于专业气象服务领域十分关注的模式强风预报性能的客观检验和致灾性强风预警服务效果的合理性判别问题,利用一次强风过程对电网专业气象预警服务效果的检验示范,探讨基于目标(面向对象)的诊断检验方法(Method for ObjectBased Diagnostic Evaluation,MODE)对强风事件检验的适用性。通过对强风空间检验的各个关键参数的选择确定、匹配分析,发现:(1)MODE检验的卷积半径、诊断量权重和匹配阈值等参数的选择,将影响检验目标的适度聚焦和误差表达的客观性,因此需要综合考虑预报和实况场的水平分辨率、用户对该类强天气预报误差的空间和时间冗余度等;(2)MODE检验可较好地量化给出模式预报的整体效果,包括:强风落区的范围大小和位置偏差、强风过程的时间相位差等,从而可量化判别出模式在各个时刻的空报和漏报区域以及对强风过程移动速度和生命周期长度的预报性能。     

确定连续系统参数的时域方法

提出一种确定连续系统参数的时域方法。该方法利用方波输入和系统稳定性，离析出输出采样信号与结构参数的内在联系，推导出确定连续系统结构参数的算法．指出该算法与辨识方法相结合，可实现对含随机干扰的连续系统结构参数的估计．