Tectonomagmatic origin of Precambrian rocks of Mexico and Argentina inferred from multi-dimensional discriminant-function based discrimination diagrams

Several new multi-dimensional tectonomagmatic discrimination diagrams employing log-ratio variables of chemical elements and probability based procedure have been developed during the last 10 years for basic-ultrabasic, intermediate and acid igneous rocks. There are numerous studies on extensive evaluations of these newly developed diagrams which have indicated their successful application to know the original tectonic setting of younger and older as well as sea-water and hydrothermally altered volcanic rocks. In the present study, these diagrams were applied to Precambrian rocks of Mexico (southern and north-eastern) and Argentina. The study indicated the original tectonic setting of Precambrian rocks from the Oaxaca Complex of southern Mexico as follows: (1) dominant rift (within-plate) setting for rocks of 1117–988 Ma age; (2) dominant rift and less-dominant arc setting for rocks of 1157–1130 Ma age; and (3) a combined tectonic setting of collision and rift for Etla Granitoid Pluton (917 Ma age). The diagrams have indicated the original tectonic setting of the Precambrian rocks from the north-eastern Mexico as: (1) a dominant arc tectonic setting for the rocks of 988 Ma age; and (2) an arc and collision setting for the rocks of 1200–1157 Ma age. Similarly, the diagrams have indicated the dominant original tectonic setting for the Precambrian rocks from Argentina as: (1) with-in plate (continental rift-ocean island) and continental rift (CR) setting for the rocks of 800 Ma and 845 Ma age, respectively; and (2) an arc setting for the rocks of 1174–1169 Ma and of 1212–1188 Ma age. The inferred tectonic setting for these Precambrian rocks are, in general, in accordance to the tectonic setting reported in the literature, though there are some inconsistence inference of tectonic settings by some of the diagrams. The present study confirms the importance of these newly developed discriminant-function based diagrams in inferring the original tectonic setting of Precambrian rocks.     

胶北地块与金成矿有关的郭家岭岩体和上庄岩体年代学及地球化学研究

胶东半岛是我国最主要的原生金矿矿集区,金矿的主要控矿围岩是郭家岭花岗岩,通过研究郭家岭花岗岩的地球化学特征对研究金矿的成因和物质来源具有指示性意义。本文研究的两个花岗岩岩体为上庄岩体和郭家岭岩体,两岩体同属郭家岭型花岗岩。通过对两岩体的花岗岩样进行岩相学矿相学观察、全岩主、微量元素和U-Pb同位素分析,获得胶东半岛中生代岩浆岩的成因机制与源区性质及自然金的产出形式等科学信息。LAICP MS锆石U-Pb年龄得出郭家岭岩体年龄125.4±2.2 Ma,上庄岩体U-Pb年龄128.8±2.0 Ma,都为中生代早白垩世,两岩体年龄相差3Ma,在年龄误差范围来看可以把两岩体作为同一期岩体,也在年龄角度证实两岩体都同属郭家岭花岗岩。两岩体的锆石组成都含有太古宙和晚侏罗纪的继承锆石,指示两岩体的成岩物质来源具相似性,都包含太古宙岩石成分和晚侏罗世花岗岩成分。两岩体具有相似的稀土元素和微量元素分配模式,表现出明显的LREE富集和HREE极度亏损,没有明显的铕负异常。郭家岭岩体和上庄岩体花岗岩都具有类似埃达克岩的特征,都具有高的Sr含量(913×10-6~1325×10-6),低的Y含量(2.2×10-6~8.4×10-6)和Yb含量(0.21×10-6~0.68×10-6),较高的(Dy/Yb)N比值1.62~2.28,暗示花岗岩岩浆形成时石榴石是一个重要的残留相,而没有斜长石作为残留相。两岩体具有较低的MgO、Cr、Ni含量和Mg#,反映郭家岭型花岗岩岩浆的形成可能是岛弧环境榴辉岩相压力条件下洋壳玄武质岩石的部分熔融。     

Cretaceous–Tertiary geology of the Gangdese Arc in the Linzhou area, southern Tibet

Knowledge of the Cretaceous–Tertiary history of upper crustal shortening and magmatism in Tibet is fundamental to placing constraints on when and how the Tibetan plateau formed. In the Lhasa terrane of southern Tibet, the widely exposed angular unconformity beneath uppermost Cretaceous–lower Tertiary volcanic-bearing strata of the Linzizong Formation provides an excellent geologic and time marker to distinguish between deformation that occurred before vs. during the Indo-Asian collision. In the Linzhou area, located  30 km north of the city of Lhasa, a > 3-km-thick section of the Linzizong Formation lies unconformably on Cretaceous and older rocks that were shortened by both northward- and southward-verging structures during the Late Cretaceous. The Linzizong Formation dips northward in the footwall of a north-dipping thrust system that involves Triassic–Jurassic strata and a granite intrusion in the hanging wall. U–Pb zircon geochronologic studies show that the Linzizong Formation ranges in age from 69 Ma to at least 47 Ma and that the hanging wall granite intrusion crystallized at  52 Ma, coeval with dike emplacement into footwall Cretaceous strata. ⁴⁰Ar/³⁹Ar thermochronologic studies suggest slow cooling of the granite between 49 and 42 Ma, followed by an episode of accelerated cooling to upper crustal levels beginning at  42 Ma. The onset of rapid cooling was coeval with the cessation of voluminous arc magmatism in southern Tibet and is interpreted be a consequence of either (1) Tertiary thrusting in this region or (2) regional rock uplift and erosion following removal of overthickened Gangdese arc lower crust and upper mantle or break-off of the Neo-Tethyan oceanic slab.     

E5000型全谱直读型电弧发射光谱仪研制及其在地球化学样品分析中应用

在地球化学样品检测工作中,Ag、B、Sn等难分析元素通常采用传统的交流电弧发射光谱法(摄谱仪),随着地球化学样品数量的增加以及对检测结果质量要求的提高,该方法操作复杂、分析过程繁琐的问题与日常大量样品分析的矛盾日益突出,多道式电弧直读发射光谱也开始在行业内应用。本文基于先进的数字光源技术和CCD全谱型光谱仪技术,改进了电弧发生系统、分光系统和检测系统,将电弧激发光源与Paschen-Runge型全谱CCD光谱仪结合,研制了一款新型的台式全谱直读型电弧发射光谱仪E5000。E5000型电弧发射光谱仪通过激光定位结合程控电极技术,自动调整电极位置,提高了采谱过程的精度控制;利用CCD全谱技术获得了激发样品的全谱信息,可轻易实现光谱信号的背景扣除和干扰校正;且无需再次测定黑度,直接获得分析结果;同时结合内标法和标准加入法,可以进一步提高复杂基体样品的分析精准度。应用研制的光谱仪对水系沉积物和土壤样品进行检测,Ag、B、Sn元素的检出限分别达到了0.01μg/g、0.65μg/g、0.16μg/g,在分析水系沉积物、土壤时检测精密度基本小于10%,优于当前的摄谱法和多道电弧直读光谱法,满足了地球化学样品检测质量要求。     

古亚洲构造域侵入岩时——空演化框架

长期以来,许多著名学者提出众多模型,讨论古亚洲构造域的构造演化和造山(带)结构样式。但是,认识上的分歧很大,特别是关于主洋盆的空间位置和闭合时间。本文主要基于中国侵入岩大地构造编图(1∶250万)和研究这个侧面,参与讨论。1侵入(岩)弧,碰撞和后造山岩石组合,随时间由西向东变新,同时,主构造带走向从近东西向转为近南北向,暗示古亚洲洋的闭合最终转化为太平洋构造域。2位于主洋盆北侧的是宽阔的西伯利亚克拉通南缘的沟——弧——盆系统;位于南侧的西面为南天山被动陆缘,中部为塔里木克拉通北缘的窄的沟——弧——盆系统,东面为华北克拉通北缘的活动陆缘。3主体侵入(岩)弧的内部分散地分布着从Pt3开始的残留弧和残留oφ,被看做是主体弧的基底。4传统上认为的构造相对稳定的"地块",本文基于它们的侵入(岩)组合归为残留弧,认为不是构造上相对稳定的性质,并未采用"地块"的术语,而把它们看作洋陆转换过程中早期残余岛弧处理。5提出主洋盆的识别有三个标志,(a)洋闭合最晚,(b)或为双向俯冲(当两侧均为活动大陆边缘时),或单向俯冲(当一侧为被动陆缘,另一侧为活动陆缘时),(c)长寿命的洋以及洋闭合带常常发育地中海式残余洋发育的陆——陆碰撞早阶段。6该构造域主要发育Pt3——T的侵入(岩)弧和oφ,支持S¨engor等关于大量新生陆壳的推测,亦与大量花岗岩类为εNd(t)"+"值符合。新生陆壳的形成又暗示,长时间的洋俯冲必导致地幔的冷却,以及大量榴辉岩进入地幔,最终导致高密度的地幔下降流形成,必导致洋的闭合与随后的陆——陆碰撞,形成最初的东亚大陆。     

发动机燃烧室内壁材料热环境的气动热试验模拟技术研究

利用超声速矩形湍流导管和等离子电弧加热器模拟了发动机燃烧室内流和高超声速飞行器外壁面外流热环境,进行了平板表面冷壁热流测量和燃烧室内壁材料考核试验。结果表明:由于辐射换热的影响,在选取的两个典型来流条件下,发动机燃烧室内流热环境下的冷壁热流比外流热环境下的高出21%和40%,但是冷壁热流的增量基本相当,约为0.70~0.80MW/m²。随着冷壁热流的增加,辐射换热产生的热流增量的影响力会逐渐减小。材料考核时,相同配方的C/SiC复合材料在内流热环境下的表面温度高出约400℃,背面温度高出约90℃,这种差异对于发动机燃烧室内壁面材料考核至关重要,必须在材料考核试验中加以考虑。      

The eruptive history of the Tequila volcanic field, western Mexico: ages, volumes, and relative proportions of lava types

The eruptive history of the Tequila volcanic field (1600 km²) in the western Trans-Mexican Volcanic Belt is based on ⁴⁰Ar/³⁹Ar chronology and volume estimates for eruptive units younger than 1 Ma. Ages are reported for 49 volcanic units, including Volcán Tequila (an andesitic stratovolcano) and peripheral domes, flows, and scoria cones. Volumes of volcanic units 1 Ma were obtained with the aid of field mapping, ortho aerial photographs, digital elevation models (DEMs), and ArcGIS software. Between 1120 and 200 kyrs ago, a bimodal distribution of rhyolite (~35 km³) and high-Ti basalt (~39 km³) dominated the volcanic field. Between 685 and 225 kyrs ago, less than 3 km³ of andesite and dacite erupted from more than 15 isolated vents; these lavas are crystal-poor and show little evidence of storage in an upper crustal chamber. Approximately 200 kyr ago, ~31 km³ of andesite erupted to form the stratocone of Volcán Tequila. The phenocryst assemblage of these lavas suggests storage within a chamber at ~2–3 km depth. After a hiatus of ~110 kyrs, ~15 km³ of andesite erupted along the W and SE flanks of Volcán Tequila at ~90 ka, most likely from a second, discrete magma chamber located at ~5–6 km depth. The youngest volcanic feature (~60 ka) is the small andesitic volcano Cerro Tomasillo (~2 km³). Over the last 1 Myr, a total of 128±22 km³ of lava erupted in the Tequila volcanic field, leading to an average eruption rate of ~0.13 km³/kyr. This volume erupted over ~1600 km², leading to an average lava accumulation rate of ~8 cm/kyr. The relative proportions of lava types are ~22–43% basalt, ~0.4–1% basaltic andesite, ~29–54% andesite, ~2–3% dacite, and ~18–40% rhyolite. On the basis of eruptive sequence, proportions of lava types, phenocryst assemblages, textures, and chemical composition, the lavas do not reflect the differentiation of a single (or only a few) parental liquids in a long-lived magma chamber. The rhyolites are geochemically diverse and were likely formed by episodic partial melting of upper crustal rocks in response to emplacement of basalts. There are no examples of mingled rhyolitic and basaltic magmas. Whatever mechanism is invoked to explain the generation of andesite at the Tequila volcanic field, it must be consistent with a dominantly bimodal distribution of high-Ti basalt and rhyolite for an 800 kyr interval beginning ~1 Ma, which abruptly switched to punctuated bursts of predominantly andesitic volcanism over the last 200 kyrs.Electronic Supplementary Material Supplementary material is available in the online version of this article at Editorial responsility: J. Donnelly-NolanThis revised version was published online in January 2005 with corrections to Tables 1 and 3.An erratum to this article can be found at     

Archean greenstone-tonalite duality: Thermochemical mantle convection models or plate tectonics in the early Earth global dynamics?

Mantle convection and plate tectonics are one system, because oceanic plates are cold upper thermal boundary layers of the convection cells. As a corollary, Phanerozoic-style of plate tectonics or more likely a different version of it (i.e. a larger number of slowly moving plates, or similar number of faster plates) is expected to have operated in the hotter, vigorously convecting early Earth. Despite the recent advances in understanding the origin of Archean greenstone–granitoid terranes, the question regarding the operation of plate tectonics in the early Earth remains still controversial. Numerical model outputs for the Archean Earth range from predominantly shallow to flat subduction between 4.0 and 2.5 Ga and well-established steep subduction since 2.5 Ga [Abbott, D., Drury, R., Smith, W.H.F., 1994. Flat to steep transition in subduction style. Geology 22, 937–940], to no plate tectonics but rather foundering of 1000 km sectors of basaltic crust, then “resurfaced” by upper asthenospheric mantle basaltic melts that generate the observed duality of basalts and tonalities [van Thienen, P., van den Berg, A.P., Vlaar, N.J., 2004a. Production and recycling of oceanic crust in the early earth. Tectonophysics 386, 41–65; van Thienen, P., Van den Berg, A.P., Vlaar, N.J., 2004b. On the formation of continental silicic melts in thermochemical mantle convection models: implications for early Earth. Tectonophysics 394, 111–124]. These model outputs can be tested against the geological record. Greenstone belt volcanics are composites of komatiite–basalt plateau sequences erupted from deep mantle plumes and bimodal basalt–dacite sequences having the geochemical signatures of convergent margins; i.e. horizontally imbricated plateau and island arc crust. Greenstone belts from 3.8 to 2.5 Ga include volcanic types reported from Cenozoic convergent margins including: boninites; arc picrites; and the association of adakites–Mg andesites- and Nb-enriched basalts.Archean cratons were intruded by voluminous norites from the Neoarchean through Proterozoic; norites are accounted for by melting of subduction metasomatized Archean continental lithospheric mantle (CLM). Deep CLM defines Archean cratons; it extends to  350 km, includes the diamond facies, and xenoliths signify a composition of the buoyant, refractory, residue of plume melting, a natural consequence of imbricated plateau-arc crust. Voluminous tonalites of Archean greenstone–granitoid terranes show a secular trend of increasing Mg#, Cr, Ni consistent with slab melts hybridizing with thicker mantle wedge as subduction angle steepens. Strike-slip faults of 1000 km scale; diachronous accretion of distinct tectonostratigraphic terranes; and broad Cordilleran-type orogens featuring multiple sutures, and oceanward migration of arcs, in the Archean Superior and Yilgarn cratons, are in common with the Altaid and Phanerozoic Cordilleran orogens. There is increasing geological evidence of the supercontinent cycle operating back to  2.7 Ga: Kenorland or Ur  2.7–2.4 Ga; Columbia  1.6–1.4 Ga; Rodinia  1100–750 Ma; and Pangea  230 Ma. High-resolution seismic reflection profiling of Archean terranes reveals a prevalence of low angle structures, and evidence for paleo-subduction zones. Collectively, the geological–geochemical–seismic records endorse the operation of plate tectonics since the early Archean.     

DEM制作检查及精度问题的解决方法

介绍了通过数字化仪手扶跟踪及扫描仪半自动采集现有地形图等高线的步骤,再通过内插方法生成DEM,并对如何提高DEM精度提出了解决方案。