A Study on the Geological—Geochemical Dynamics of Hydrothermal Ore Deposition as Exemplified by the Muping—Rushan Gold Deposit Belt,Eastern Shandong,China

This paper presents a method of establishing a hydrothermal ore-forming reaction system.On the basis of the study of four typical hydrothermal deposits,the following conclusions concerning geochemical dynamic controlling during hydrothermal mineralization have been sions concerning geochemical dynaamic controlling during hydrothermal mineralization have been drawn:(1)The regional tectonic activities control the concentration and dispersion of elements in the ore-forming process in terms of their effects on the thermodynamic nature and conditions of the ore-forming reaction system.(2)During hydrothermal mineralization the activites of ore-bearing faults can be divideb into two stages:the brittle splitting stage and the brittle-tough tensing stage,which would create characteristically different geodynamic conditions for the geochemical thermodynamic ore-forming system.(3)The hydrothermal ore-forming reaaction system is an open dynamic system.At the brittle splitting stage the system was so strongly supersaturated and unequilibrated as to speed up and enhance the crystallization and differentiation of ore-forming fluids.And at the brittle-tough tensing stage,the ore-forming system was in a weak supersaturated state;with decreasing temperature and pressure the crystallization of oreforming material would show down,and it can be regarded as an equilibrated state.(4)In the lates stages of hydrothermal evolution,gold would be concentrated in the residual ore-forming solution.The pulsating fracture activite in this stage led to the crush of pyrite ore and it was then filled with gold-enriched solution,forming high-grage“fissure”gold ore.This ore-forming process could be called the coupling mechanism of ore formation.     

南秦岭沉积岩型金矿成矿潜力与找矿前景分析

南秦岭沉积岩区广泛分布于商丹缝合带与勉略缝合带间的秦岭地块中，并以上古生界泥盆系最为发育。该含矿与岩矿建造中产出多种类型的浸染状金矿床，具有一定的空间分布规律。本文根据各金矿类型地质特征、岩矿与含矿岩系组成、所在区地质背景等方面，分析了它们的成矿潜力和找矿前景。     

山东牟平邓格庄金矿的地球化学特征及成因

邓格庄大型石英脉型金矿，分布于燕山期昆嵛山花岗岩体内金牛山断裂带次级断裂中。成矿年龄１１８×１０６ａ，它比容矿岩体冷凝至３５０℃时还晚１２×１０６ａ。成矿深度小于１ｋｍ（约０．７５ｋｍ），而容矿岩体的定位深度大于１３ｋｍ，它们的定位深度差大于１２ｋｍ。成矿流体来自地壳深部，通过水－岩反应又从容矿岩体中萃取一部分金。故此金矿不是传统意义的岩浆期后热液矿床     

多宝山矿田的地面波谱研究及其在铜矿预测中的应用

根据矿田内岩矿地质波谱与ＴＭ图象亮度的线性相关关系，论述了多宝山铜矿田内矿床的地面波谱特征，地空相关模型及ＴＭ数据的地空相关分析方法，在此基础上讨论了其在铜矿预测中的应用效果。     

山东文登金矿成矿动力学研究

本文通过古应力估算，流体包体研究，应变测量以及矿化蚀变规律研究，探讨了山东文登金矿的动力作用与金成矿的主要关系，认为构造动力作用的金成矿的主要原因，韧性剪切作用向韧－脆性变形作用的过渡过程是金成矿的必要条件之一。     

山东招远北截金矿床地质特征及深部成矿预测

对北截金矿的矿床与矿体地质构造及成矿模式和构造应力场的综合研究表明，北截金矿主要是受ＮＥ向的灵山沟－北截断裂控制，其储矿构造部位与与断裂带小角度斜交的ＮＮＥ向张剪性断裂，矿体主要分布于其中的２号矿带之中，矿体之间呈右行斜列为ＳＷ深部发展；百区内的ＮＷＷ向断裂为成矿后断裂，对矿体有较小的破坏作用；对矿区内Ａｕ、Ａｇ、Ａｓ、Ｍｏ、Ｓｂ、Ｂｉ进行的微量元素原生晕及Ａｇ／Ａｕ、Ａｓ／Ｍｏ与Ｓｂ／Ｂｉ比值分     

胶东昆嵛山花岗岩的特征、成因及其与金矿的关系

昆嵛山花岗岩是牟平—乳山金矿成矿带的围岩，在其成因和定位时代上长期存在争议。本文对岩体地质和地球化学特征进行了系统研究，并就岩体成因及其与金矿的关系进行了讨论。作者认为，昆嵛山花岗岩是在中生代由岩浆缓慢冷凝结晶形成的大型复式岩基，并非交代成因。它由垛崮顶片麻状花岗闪长岩（１４７Ｍａ）、八门邹家斑状花岗闪长岩（１３５Ｍａ）、瓦善—水道弱片麻状二长花岗岩及五爪山片麻状含榴二长花岗岩（１２０Ｍａ）组成，成分具贫铝富碱的特点。岩浆来源于中下地壳中酸性变质火山岩系部分熔融形成的岩浆，其形成温度为６５０—７５０℃。岩体经历了韧性和脆性变形作用，不同方向的片麻状构造是岩浆结晶期韧性变形作用的结果。脆性变形形成的断裂和破碎带是本区主要的导矿和容矿构造。花岗岩定位、韧和脆性变形作用与金矿成矿作用有十分密切的关系     

Important Geological Factors Controlling the Formation of Gold Deposits in East China

The major gold deposits in east China are characterized by their occurrence in pre-Cambrian host metamorphic rocks,restriction in some specific stratigraphic-structural terranes,tendentious localization in ductile or ductile-brittle shear zones,association with the syntexis type granitoids,and significant remobilization,superimposition and enrichment by the later stage Mesozoic tectono-magmatic activities.     

Sediment—Hosted Gold Deposits in China_geochemistry and Prospecting

Sediment-hosted gold deposits are the major type of gold resources in china,Concen trated mostly in the two“Triangle Regios“,they are generally hosted in fine-clastic turbidite,hydrothermal chet and marl ranging from cambrian to Triassic in age,structurally controlled by domes,anticlines and second-ordered faults.They are similar to the Carlin-type gold deposits in mineral assemblage and geochemical marks,with an element association closely comparable to those of modern springs and submarine hydrothermal sediments.Organic matter may have played an important role in mineralization .The ore solution may be hydrothermally altered meteoric water developed i areas of local geothermal anomaly.     

Upper Mississippi embayment shallow seismic velocities measured in situ

Vertical seismic compressional- and shear-wave (P-and S-wave) profiles were collected from three shallow boreholes in sediment of the upper Mississippi embayment. The site of the 60-m hole at Shelby Forest, Tennessee, is on bluffs forming the eastern edge of the Mississippi alluvial plain. The bluffs are composed of Pleistocene loess, Pliocene-Pleistocene alluvial clay and sand deposits, and Tertiary deltaic-marine sediment. The 36-m hole at Marked Tree, Arkansas, and the 27-m hole at Risco, Missouri, are in Holocene Mississippi river floodplain sand, silt, and gravel deposits. At each site, impulsive P- and S-waves were generated by man-made sources at the surface while a three-component geophone was locked downhole at 0.91-m intervals.

Consistent with their very similar geology, the two floodplain locations have nearly identical S-wave velocity (V_S) profiles. The lowest V_S values are about 130 m s⁻¹, and the highest values are about 300 m s⁻¹ at these sites. The shear-wave velocity profile at Shelby Forest is very similar within the Pleistocene loess (12 m thick); in deeper, older material, V_S exceeds 400 m s⁻¹.

At Marked Tree, and at Risco, the compressional-wave velocity (V_P) values above the water table are as low as about 230 m s⁻¹, and rise to about 1.9 km s⁻¹ below the water table. At Shelby Forest, V_P values in the unsaturated loess are as low as 302 m s⁻¹. V_P values below the water table are about 1.8 km s⁻¹. For the two floodplain sites, the V_P/V_S ratio increases rapidly across the water table depth. For the Shelby Forest site, the largest increase in the V_P/V_S ratio occurs at 20-m depth, the boundary between the Pliocene-Pleistocene clay and sand deposits and the Eocene shallow-marine clay and silt deposits.

Until recently, seismic velocity data for the embayment basin came from eartquake studies, crustal-scale seismic refraction and reflection profiles, sonic logs, and from analysis of dispersed earthquake surface waves. Since 1991, seismic data for shallow sediment obtained from reflection, refraction, crosshole and downhole techniques have been obtained for sites at the northern end of the embayment basin. The present borehole data, however, are measured from sites representative of large areas in the Mississippi embayment. Therefore, they fill a gap in information needed for modeling the response of the embayment to destructive seismic shaking.