On the spatial characteristic of the short term and imminent anomalies of underground water behaviors before strong earthquake

Ｏｎｔｈｅｓｐａｔｉａｌｃｈａｒａｃｔｅｒｉｓｔｉｃｏｆｔｈｅｓｈｏｒｔ┐ｔｅｒｍａｎｄｉｍｍｉｎｅｎｔａｎｏｍａｌｉｅｓｏｆｕｎｄｅｒｇｒｏｕｎｄｗａｔｅｒｂｅｈａｖｉｏｒｓｂｅｆｏｒｅｓｔｒｏｎｇｅａｒｔｈｑｕａｋｅＸＵＥ－ＢＩＮＤＵ（杜学彬）...     

Sedimentary Features of Shallow Ancient River Channels on the Northern Shelf of the South China Sea

Quaternary buried ancient river channels are widespread in the shallow-level sediments of the northern shelf of the South China Sea. The sedimentary sequence mainly of fluvial deposits comprise an important component part of the low-stand system tract and transgressive system tract in the study region. The plannar variation and spatial association of the sedimentary features such as incised valley fillings, deltaic foreset wedges and block slides of shelf-marginal fans reflect the palaeogeographic environment during the fall of the regional sea level in the northern part of the South China Sea. Based on the high-resolution seismic reflection data and gelogical data from boreholes, the present paper makes an integrated interpretation of the Quaternary ancient river channels in the shallow sediments of the study area, studies the sedimentary features of the ancient channels such as their spatial distribution, seismic facies reflection indicators, sedimentary facies and sand -body types, and discusses thei     

3-D seismic structure of the source area of the 1993 Latur, India, earthquake and its implications for rupture nucleations

The Latur earthquake (M_w 6.1) of 29 September 1993 is a rare stable continental region (SCR) earthquake that occurred on a previously unknown blind fault. In this study, we determined detailed three-dimensional (3-D) P- and S-wave velocity (V_p, V_s) and Poisson's ratio (σ) structures by inverting the first P- and S-wave high-quality arrival time data from 142 aftershocks that were recorded by a network of temporary seismic stations. The source zone of the Latur earthquake shows strong lateral heterogeneities in V_p, V_s and σ structures, extending in a volume of about 90 × 90 × 15 km³. The mainshock occurred within, but near the boundary, of a low-V_p, high-V_s and low-σ zone. This suggests that the structural asperities at the mainshock hypocenter are associated with a partially fluid-saturated fractured rock in a previously unknown source zone with intersecting fault surfaces. This might have triggered the 1993 Latur mainshock and its aftershock sequence. Our results are in good agreement with other geophysical studies that suggest high conductivity and high concentration of radiogenic helium gas beneath the source zone of the Latur earthquake. Our study provides an additional evidence for the presence of fluid related anomaly at the hidden source zone of the Latur earthquake in the SCR and helps us understand the genesis of damaging earthquakes in the SCR of the world.     

Seismic lamination and anisotropy of the Lower Continental Crust

Seismic lamination in the lower crust associated with marked anisotropy has been observed at various locations. Three of these locations were investigated by specially designed experiments in the near vertical and in the wide-angle range, that is the Urach and the Black Forrest area, both belonging to the Moldanubian, a collapsed Variscan terrane in southern Germany, and in the Donbas Basin, a rift inside the East European (Ukrainian) craton. In these three cases, a firm relationship between lower crust seismic lamination and anisotropy is found. There are more cases of lower-crustal lamination and anisotropy, e.g. from the Basin and Range province (western US) and from central Tibet, not revealed by seismic wide-angle measurements, but by teleseismic receiver function studies with a P–S conversion at the Moho. Other cases of lamination and anisotropy are from exhumed lower crustal rocks in Calabria (southern Italy), and Val Sesia and Val Strona (Ivrea area, Northern Italy). We demonstrate that rocks in the lower continental crust, apart from differing in composition, differ from the upper mantle both in terms of seismic lamination (observed in the near-vertical range) and in the type of anisotropy. Compared to upper mantle rocks exhibiting mainly orthorhombic symmetry, the symmetry of the rocks constituting the lower crust is either axial or orthorhombic and basically a result of preferred crystallographic orientation of major minerals (biotite, muscovite, hornblende). We argue that the generation of seismic lamination and anisotropy in the lower crust is a consequence of the same tectonic process, that is, ductile deformation in a warm and low-viscosity lower crust. This process takes place preferably in areas of extension. Heterogeneous rock units are formed that are generally felsic in composition, but that contain intercalations of mafic intrusions. The latter have acted as heat sources and provide the necessary seismic impedance contrasts. The observed seismic anisotropy is attributed to lattice preferred orientation (LPO) of major minerals, in particular of mica and hornblende, but also of olivine. A transversely isotropic symmetry system, such as expected for sub-horizontal layering, is found in only half of the field studies. Azimuthal anisotropy is encountered in the rest of the cases. This indicates differences in the horizontal components of tectonic strain, which finally give rise to differences in the evolution of the rock fabric.     

Planation, bauxites and epeirogeny: One or two paleosurfaces on the West African margin?

Mapping of lateritic bauxites over the West African rifted margin and analysis of the geomorphic properties of these bauxites, combined with available geological data lead to a discussion of the presence of either two Meso-Cenozoic planation surfaces or a single Eocene surface to account for the morphotectonic and paleoclimatic evolution of the Guinean landforms. At large scale, two stepped bauxitic levels are documented. Ongoing or episodic uplift following Gondwana breakup and Meso-Cenozoic climate change are proposed to have allowed the formation and abandonment of an Early mid-Cretaceous surface today preserved as the higher bauxitic level, and the setting of an Eocene planation surface bearing a second generation of bauxites, making the lower bauxitic level. The single Eocene surface hypothesis requires that Paleogene bauxitization preserved large pre-existing relief to explain two stepped bauxitic levels of the same age. The two-surface hypothesis is favored because it would explain rebauxitization of alluvial pebbles of bauxites under the lower lateritic level.     

Crustal structure across the Grand Banks–Newfoundland Basin Continental Margin – II. Results from a seismic reflection profile

New multichannel seismic reflection data were collected over a 565 km transect covering the non-volcanic rifted margin of the central eastern Grand Banks and the Newfoundland Basin in the northwestern Atlantic. Three major crustal zones are interpreted from west to east over the seaward 350 km of the profile: (1) continental crust; (2) transitional basement and (3) oceanic crust. Continental crust thins over a wide zone (∼160 km) by forming a large rift basin (Carson Basin) and seaward fault block, together with a series of smaller fault blocks eastwards beneath the Salar and Newfoundland basins. Analysis of selected previous reflection profiles (Lithoprobe 85-4, 85-2 and Conrad NB-1) indicates that prominent landward-dipping reflections observed under the continental slope are a regional phenomenon. They define the landward edge of a deep serpentinized mantle layer, which underlies both extended continental crust and transitional basement. The 80-km-wide transitional basement is defined landwards by a basement high that may consist of serpentinized peridotite and seawards by a pair of basement highs of unknown crustal origin. Flat and unreflective transitional basement most likely is exhumed, serpentinized mantle, although our results do not exclude the possibility of anomalously thinned oceanic crust. A Moho reflection below interpreted oceanic crust is first observed landwards of magnetic anomaly M4, 230 km from the shelf break. Extrapolation of ages from chron M0 to the edge of interpreted oceanic crust suggests that the onset of seafloor spreading was ∼138 Ma (Valanginian) in the south (southern Newfoundland Basin) to ∼125 Ma (Barremian–Aptian boundary) in the north (Flemish Cap), comparable to those proposed for the conjugate margins.     

Geodynamic significance of granitoid magmatism in the southeast Anatolian orogen: geochemical and geochronogical evidence from Göksun–Afşin (Kahramanmaraş, Turkey) region

In southeast Anatolia, there are number of tectonomagmatic units in the Kahramanmaraş–Malatya–Elazığ region that are important in understanding the geological evolution of the southeast Anatolian orogenic belt during the Late Cretaceous. These are (a) metamorphic massifs, (b) ophiolites, (c) ophiolite-related metamorphics and (d) granitoids. The granitoids (i.e. Göksun–Afşin in Kahramanmaraş, Doğanşehir in Malatya and Baskil in Elazığ) intrude all the former units in a NE–SW trending direction. The granitoid in Göksun–Afşin (Kahramanmaraş) region is mainly composed of granodioritic and granitic in composition. The granodiorite contains a number of amphibole-bearing mafic microgranular enclaves of different sizes, whereas the granite is intruded by numerous aplitic dikes. The granitoid rocks have typical calcalkaline geochemical features. The REE- and Ocean ridge granite-normalized multi-element patterns and tectonomagmatic discrimination diagrams, as well as biotite geochemistry suggest that the granitoids were formed in a volcanic arc setting. The K–Ar geochronology of the granitoid rocks yielded ages ranging from 85.76±3.17 to 77.49±1.91 Ma. The field, geochemical and geochronological data suggest the following Late Cretaceous tectonomagmatic scenario for southeast Anatolia. The ophiolites were formed in a suprasubduction zone tectonic setting whereas the ophiolite-related metamorphic rocks formed either during the initiation of intraoceanic subduction or late-thrusting (∼90 Ma). These units were then overthrust by the Malatya–Keban platform during the progressive elimination of the southern Neotethys. Thrusting of the Malatya–Keban platform over the ophiolites and related metamorphic rocks was followed by the intrusion of the granitoids (88–85 Ma) along the Tauride active continental margin in the southern Neotethys.     

青藏高原东缘龙门山晚新生代剥蚀厚度与弹性挠曲模拟

龙门山是青藏高原东缘边界山脉,具有青藏高原地貌、龙门山高山地貌和山前冲积平原三个一级地貌单元。利用数字高程模式图像和裂变径迹年代测定方法研究和计算龙门山晚新生代剥蚀厚度与剥蚀速率,结果表明:3.6 Ma以来龙门山的剥蚀厚度介于1.91-2.16 km之间,剥蚀速率介于0.53-0.60 mm/a之间。在此基础上,开展了该地区岩石圈的弹性挠曲模拟,结果表明龙门山的隆升机制具有以构造缩短隆升和剥蚀卸载隆升相叠合的特点。3.6 Ma之前,龙门山的隆升与逆冲推覆构造负载有关,以构造缩短驱动的构造隆升为特色;3.6 Ma之后,龙门山的隆升与剥蚀卸载驱动的抬升有关,并以剥蚀卸载隆升为特色,进而提出了龙门山晚新生代以来的隆升机制以剥蚀成山作用为主的认识。