滇西茅草坪脉状铜矿床脉体构造与成矿时代研究

西南三江造山带兰坪盆地西缘发育一条重要的脉状铜矿带,通常认为其成矿与盆地演化有关,而忽略了同处于盆地西缘的崇山剪切带和成矿的关系。茅草坪是近来在该带南段新发现的一例脉状铜矿床,本文通过详细野外工作厘定矿床地质特征,重点开展露头及镜下尺度的含矿脉体构造观察,在此基础上,分选成矿期热液白云母开展40 Ar/39 Ar定年,进而探讨成矿与剪切变形的关系。研究表明,矿床热液矿物以3种形式出现:热液蚀变晕、平行剪切面理的热液脉(A1脉)、横切剪切面理的热液脉(A2脉)。以上不同脉体中的矿物不仅有连续生长的特点,而且存在一定的交切关系,反映它们大致同期形成,但矿物沉淀顺序由早到晚变化。蚀变晕形成于早期,主要由电气石和石英组成,矿物呈强定向排列,长轴平行于剪切面理,为将挤压剪切应变下形成;A1脉形成略晚于蚀变晕,主要由电气石、石英、方解石、白云石、白云母、黄铜矿等组成,矿物弱定向排列,长轴近平行于剪切面理,为弱挤压剪切应变下形成;A2脉形成最晚,脉内矿物与A1脉相似,矿物无定向性、张性充填,反映形成时剪切变形已停止,可能为变形后应力松弛阶段形成的张性脉。因此,茅草坪矿床矿化形成在剪切作用由强变弱、直至停止的过程中,为剪切作用末期的产物。A1脉体中的白云母40 Ar/39 Ar坪年龄为20.34±0.19 Ma,可以代表矿床形成年龄,表明茅草坪地区的剪切作用结束于20Ma。综上表明,茅草坪矿床形成在崇山剪切带区域剪切走滑期间(末期),矿化受与剪切变形末期相关构造控制,是一个与崇山剪切带演化有关的脉状Cu矿床。因此,兰坪盆地西缘脉状铜矿带矿床成因应充分考虑与崇山剪切带演化的关系。     

Possible spatial variability in the Selwyn Block of Central Victoria: evidence from Late Devonian felsic igneous rocks

The Neoproterozoic to Cambrian Selwyn Block in Central Victoria forms the mainly unexposed basement to the Paleozoic metasediments, granitic rocks and felsic volcanic complexes of the Melbourne Zone of the Lachlan Orogen. The Late Devonian felsic rocks are largely products of partial melting of the Selwyn Block, and their chemistry implies that their sources were most probably arc-related andesite, dacite, volcaniclastic greywackes and some pelites. When plotted against the median longitudes of the plutons and volcanic complexes, the average values for ⁸⁷Sr/⁸⁶Sr_t and ?Nd_t (at 370 Ma) reveal broad trends interpreted to reflect possible compositional and/or age structure in the Selwyn Block. Assuming that the trends are real, from W to E, I-type sources are progressively less crustally evolved, probably younging eastward. The S-type sources show no trend in ?Nd_t, suggesting that there was efficient sediment mixing. The ⁸⁷Sr/⁸⁶Sr_t values, however, become more evolved eastward (opposite in sense to the apparent variation in the I-type sources). This is interpreted as the original Selwyn Block sediments having been more pelitic eastward, perhaps suggesting a deepening of the basin in this direction, as well as structurally upward in the succession. The opposite senses of variation highlights the spatial separation of the S- and I-type sources and suggest that the granitic magmas here are unlikely to represent any sort of mixing continuum.     

新疆卡拉麦里金矿带成矿规律及找矿预测

新疆卡拉麦里成矿带内地层较全、构造发育、岩浆活动频繁，志留系、泥盆系和石炭系在带内广泛发育，为本区主要含金地层．卡拉麦里深断裂严格控制区内侵入岩、次一级构造和矿产分布，构成岩浆侵入的主要通道，与此有关的次一级断层和裂隙则构成良好的赋存空间．卡拉麦里深大断裂纵贯全区，金成矿地质条件优越，沿走向Au异常、金矿床(点)成群成带分布，最后确定了7个金找矿远景区．     

东川拖布卡金矿矿化层位与找金方向

超大型拖布卡金矿的发现,表明东川地区具备找金前景.“黑层”是金的成矿前提,断裂加蚀变是成矿必备条件,基性与中性岩脉在容矿层中的侵位,是找富金的重要标志.金成矿全过程应是多旋回（晋宁、华力西、燕山、喜马拉雅山）成矿作用,且受剪切破碎带控制的黑层型金矿.     

滇西水成铀矿勘探综合测井成果

滇西龙川江盆地发现水成铀矿。本文借助地球物理综合测井技术，对龙川江盆地水成铀矿的成矿规律作有益分析和探讨。重点论述滇西水成铀成矿的成矿（沉积）环境及其成矿物征。     

HP–LT Variscan metamorphism in the Cubito-Moura schists (Ossa-Morena Zone, southern Iberia)

Multi-equilibrium thermobarometry shows that low-grade metapelites (Cubito-Moura schists) from the Ossa–Morena Zone underwent HP–LT metamorphism from 340–370 °C at 1.0–0.9 GPa to 400–450 °C at 0.8–0.7 GPa. These HP–LT equilibriums were reached by parageneses including white K mica, chlorite and chloritoid, which define the earliest schistosity (S₁) in these rocks. The main foliation in the schists is a crenulation cleavage (S₂), which developed during decompression from 0.8–0.7 to 0.4–0.3 GPa at increasing temperatures from 400–450 °C to 440–465 °C. Fe³⁺ in chlorite decreased greatly during prograde metamorphism from molar fractions of 0.4 determined in syn-S₁ chlorites down to 0.1 in syn-S₂ chlorites. These new data add to previous findings of eclogites in the Moura schists indicating that a pile of allochtonous rocks situated next to the Beja-Acebuches oceanic amphibolites underwent HP–LT metamorphism during the Variscan orogeny. To cite this article: G. Booth-Rea et al., C. R. Geoscience 338 (2006).     

Anticlockwise evolution of ultrahigh-temperature granulites within continental collision zone in southern India

We report three new localities of corundum and sapphirine-bearing hyper aluminous Mg-rich and silica-poor ultrahigh-temperature granulites formed during Late Neoproterozoic-Cambrian times within the Palghat–Cauvery Shear Zone system in southern India. From petrologic characteristics, mineral chemistry and petrogenetic grid considerations, the peak metamorphic conditions of these rocks are inferred to lie around 950–1000 °C (as suggested by Al in orthopyroxene thermometer) at pressures above 10 kbar (as indicated by the equilibrium orthopyroxene–sillimanite–gedrite ± quartz assemblage). These rocks preserve several remarkable reaction textures, the most prominent among which is the triple corona of spinel–sapphirine–cordierite on corundum, with the whole textural assembly embedded within the matrix of gedrite, suggesting the reaction: Ged + Crn = Spl + Spr + Crd. The formation of sapphirine–sillimanite assemblage/symplectite associated with relict corundum and porphyroblasitc cordierite is explained by the reaction: Crd + Crn = Spr + Sil. The association of sapphirine cordierite symplectite with gedrite–sillimanite assemblage as well as with aluminosilicate boundaries indicates the gedrite consuming reaction: Ged + Sil = Spr + Crd. Extensive growth of sapphirine–cordierite observed on the rim of gedrite porphyroblasts with spinel occurring as relict inclusions within the sapphirine indicates the reaction: Ged + Spl = Spr + Crd. The pressure–temperature (P–T) path defined from the observed mineral assemblages and reaction texture is characterized by anticlockwise trajectory, with a prograde segment of initial heating and subsequent deep burial, followed by retrograde near-isothermal decompression. Such an anticlockwise trajectory is being reported for the first time from southern India and has important tectonic implications since these rocks were developed at the leading edge of the crustal block that was involved in collisional orogeny and subsequent extension during the final phase of assembly of the Gondwana supercontinent. We propose that the rocks were subjected to deep subduction and rapid exhumation, and the extreme thermal conditions were attained either through input from underplated mantle-derived magmas, or convective thinning or detachment of the lithospheric thermal boundary layer during or after crustal thickening.     

基于地层结构组合的第四纪地质单元划分研究——以皖江经济带沿江丘陵平原区为例

为支撑地质条件复杂地区的水文地质、工程地质和环境地质调查研究,在皖江经济带沿江丘陵平原区通过系统分析第四纪地层的岩性、结构、构造等组合,以地貌以及第四系成因、沉积相和沉积物物源为指标,结合已有区域第四纪研究成果以及年代地层和岩石地层划分标准,进行皖江沿江丘陵平原区“第四纪地质单元”划分,共划分出冲积-湖积平原地质单元、洪积-坡积岗地地质单元和残积-剥蚀丘陵地质单元3个一级地质单元,总结了7种类型第四纪地层结构组合及其特征,为区域水文地质和工程地质调查与研究奠定了基础。