皖南地区区域地球化学特征及成矿潜力的地球化学预测

根据皖南地区1:20万区域化探资料,计算了区内元素的背景值、区域浓集系数、总体变化系数等参数,阐明了区内元素含量空间分布与成矿元素共生组合特征。使用区域浓集系数及变化系数两个参数,对皖南地区32种元素的成矿潜力进行排序,在目前安徽省地质勘查主攻矿种中,皖南地区的成矿潜力依次为金(银)-钨-钼-铜-铀-锌-铅。同时根据地球化学块体理论和方法,预测了区内金、银资源量,分别为金474t、银16117t,显示出较大的找矿潜力。     

利用岩石质量指标和岩体块度指数进行岩体质量评价研究——以高放废物地质处置库预选场址甘肃北山1号钻孔为例

岩体质量的评价对于各类大型建筑物特别是地下工程建筑物的安全性具有十分重要的作用。文章基于岩石质量指标（RQD）和岩体块度指数（RBI）的理论，通过对甘肃北山1号钻孔的岩心实测资料证明，岩体块度指数在一定程度上能反映岩体的完整性与相应力学性质的变化特点，同时给出钻孔附近岩体质量分类，进而与岩石质量指标所获得的钻孔附近岩体质量评价分级进行对比。对比结果表明：岩体块度指数在岩石质量评价中能更准确地反映其优越性，具有更为显著的工程意义。     

Field Measurement of Suction, Water Content, and Water Permeability

This paper presents a review of techniques for field measurement of suction, water content, and water hydraulic conductivity (permeability). Main problems in the use of field tensiometers are addressed and hints on how to improve tensiometer performance are given. Advantages and limitations of instruments for indirect measurement of suction including electrical conductivity sensors, thermal conductivity sensors, dielectric permittivity sensors, filter paper, and psychrometer are discussed. Techniques for water content measurement based on dielectric methods are then presented. These include time and amplitude domain reflectometry and capacitance. Finally, a brief overview of methods for measurement of water permeability in the field is presented.     

空心块体水沙动力及泥沙淤积特性研究

空心块体具有良好的阻水和促淤功能,近年来被广泛用于生态修复工程。本文结合水槽试验及Flow-3D数值模拟,分析了开敞型和半封闭型空心块体的阻水效应和泥沙淤积特性。结果表明：空心块体的开孔率对内部水流流速、紊动强度起主导作用,开孔率较小的半开敞型空心块体减速、制紊效果更强;开敞型和半封闭型空心块体近底层悬沙浓度分别增大56%和75%,两者均有利于促进泥沙在块体内部淤积,近底层水流紊动越强,泥沙淤积形态差异越大;空心块体所营造的低流速、泥沙微淤、内外连通的水沙环境是大型底栖生物的生境需求,半封闭型空心块体内部的低紊动水流结构更有利于大型底栖生物的栖息、繁衍。     

稀少控制点异轨立体卫星影像区域网平差应用研究

结合PixelGrid软件应用,分析了异轨立体卫星影像区域网平差原理。在稀少控制点情况下,针对大范围高分辨率立体卫星遥感影像的区域网平差处理,提出了5种解决方案,并进行了实验分析,得出明确的结论。     

Simulation of paleotectonic stress fields and quantitative prediction of multi-period fractures in shale reservoirs: A case study of the Niutitang Formation in the Lower Cambrian in the Cen'gong block,South China

Reservoirs where tectonic fractures significantly impact fluid flow are widespread. Industrial-level shale gas production has been established from the Lower Cambrian Niutitang Formation in the Cen'gong block, South China; the practice of exploration and development of shale gas in the Cen'gong block shows that the abundance of gas in different layers and wells is closely related to the degree of development of fractures. In this study, the data obtained from outcrop, cores, and logs were used to determine the developmental characteristics of such tectonic fractures. By doing an analysis of structural evolution, acoustic emission, burial history, logging evaluation, seismic inversion, and rock mechanics tests, 3-D heterogeneous geomechanical models were established by using a finite element method (FEM) stress analysis approach to simulate paleotectonic stress fields during the Late Hercynian—Early Indo-Chinese and Middle-Late Yanshanian periods. The effects of faulting, folding, and variations of mechanical parameters on the development of fractures could then be identified. A fracture density calculation model was established to determine the quantitative development of fractures in different stages and layers. Favorable areas for shale gas exploration were determined by examining the relationship between fracture density and gas content of three wells. The simulation results indicate the magnitude of minimum principal stress during the Late Hercynian — Early Indo-Chinese period within the Cen'gong block is −100 ∼ −110 MPa with a direction of SE-NW (140°–320°), and the magnitude of the maximum principal stress during the Middle-Late Yanshanian period within the Cen'gong block is 150–170 MPa with a direction of NNW-SSE (345°–165°). During the Late Hercynian — Early Indo-Chinese period, the mechanical parameters and faults play an important role in the development of fractures, and fractures at the downthrown side of the fault are more developed than those at the uplifted side; folding plays an important role in the development of fractures in the Middle-Late Yanshanian period, and faulting is a secondary control. This 3-D heterogeneous geomechanical modelling method and fracture density calculation modelling are not only significant for prediction of shale fractures in complex structural areas, but also have a practical significance for the prediction of other reservoir fractures.     

Sedimentary control on the formation of a multi-superimposed gas system in the development of key layers in the sequence framework

Based on core observations, well logs and test results of siderite-bearing mudstone from the Benxi Formation to the Member 2 of the Shanxi Formations in the Linxing block, northeastern Ordos Basin, a logging identification model for siderite-bearing mudstone (key layer) was established. The porosity characteristics and sealing property were quantitatively evaluated by logging data. Sedimentary control on the formation of multi-superimposed gas-bearing system in the development of key layers in the sequence framework was also discussed. The results showed that the siderite-bearing mudstone has obvious logging response characteristics, e.g., high photoelectric absorption cross-section index (PE), high density (DEN), high amplitude natural gamma ray (GR), low acoustic (AC), low resistivity (M2RX) and low neutron porosity (CNCF). The quantitatively evaluated results of the porosity characteristics and sealing property for the key layer showed that the key layer has the characteristics of low porosity (with an average of 1.20 percent), low permeability (with an average of 2.29 × 10⁻⁸μm²), and high breakthrough pressure (with an average of 12.32 MPa) in the study area. This layer acts as an impermeable gas barrier in a multi-superimposed gas system. The results also indicated that the material composition of the multi-superimposed gas-bearing system can be established by the sequence stratigraphic framework. The sedimentary evolution results in a cyclic rhythm of material composition vertically. The spatial distribution of the corresponding transgressive event layer near the maximum flooding surface (MFS) in the sequence framework restricts the spatial distribution of the key layer with high breakthrough pressure and low porosity, which constitutes the gas-bearing system boundary. The siderite-bearing mudstone formed near the MFS in the second-order sequence and constitutes a stable comparison of the first-order gas-bearing system boundary, which has a wide range of regional distribution and stable thickness. The siderite-bearing mudstone formed near the MFS in the third-order sequence is often incompletely preserved due to the late (underwater) diversion channel erosion and cutting. This layer forms the coal-bearing reservoirs, which we termed as a second-order gas-bearing system in adjacent third-order sequences to form a uniform gas-bearing system.     

Experimental analysis of breakwater stability with antifer concrete block

Armor is a pavement made of erosion-resistant materials like a stone or concrete that is constructed to protect breakwater, coasts, and other coastal line features against erosion. These armors are a kind of protective layer made of stone or concrete, used in breakwater constructions or coastal lines, arrayed with specific regular or irregular pattern on the breakwater or the coast. The antifer concrete blocks have almost cubic form, often changed into frustum by adding inclined plates to their sides. One of the most important advantages of these armors is their diversified regular and irregular placement patterns. In this study, using the physical modeling and different tests, the stability level of antifer concrete blocks was evaluated considering the decrease of the armor weight. Results of this study show that by a 10% decrease in the block weight, the failure graph slope is increased and the damage is intensified.     

东海陆架前缘斜坡(冲绳海槽西坡)北部的断块隆脊地貌

东海陆架前缘斜坡(冲绳海槽西坡)北部的断块隆脊,是呈长条形的脊状台式隆起,位于29°30′N-31°10′N;128°00′E-128°20′E之间。其由NNE向链状排列的断块山地组成,且与NNE向的断裂构造相一致,其顶部水深约300m～400m左右。从实测单道地震剖面看,隆脊的东西两侧均有断层出现。隆脊西坡倾向陆架一侧,坡度大,有的地方坡度超过10°;而东侧坡度较缓,仅1°左右,缓倾至海槽西坡坡底,并以沟坎式与冲绳海槽槽底相连。冲绳海槽地区的构造运动,使隆脊地区受到断裂构造的作用。NNE向的大断裂使该隆脊位置的东西两侧断裂下降而中间抬起,加之下部岩浆上侵,显现出链式排列的断块山地,表现为一条长形的断块隆脊构造地貌体。推测该地貌体形成的时期较晚,它是与断层的发生同时期形成的。