Metamorphic charnockite in contact aureoles around intrusive enderbite from Natal, South Africa

In the Port Edward area of southern Kwa-Zulu Natal, South Africa, charnockitic aureoles up to 10 m in width in the normally garnetiferous Nicholson's Point Granite, are developed adjacent to intrusive contacts with the Port Edward Enderbite and anhydrous pegmatitic veins. Mineralogical differences between the country rock and charnockitic aureole suggest that the dehydration reaction Bt + Qtz → Opx + Kfs + H₂O and the reaction of Grt + Qtz → Opx + Pl were responsible for the charnockitization. The compositions of fluid inclusions show systematic variation with: (1) the Port Edward Enderbite being dominated by CO₂ and N₂ fluid inclusions; (2) the non-charnockitized granite by saline aqueous inclusions with 18–23 EqWt% NaCl; (3) the charnockitic aureoles by low-salinity and pure water inclusions (<7 EqWt% NaCl); (4) the pegmatites by aqueous inclusions of various salinity with minor CO₂. As a result of the thermal event the homogenization temperatures of the inclusions in charnockite show a much larger range (up to 390 °C) compared to the fluid inclusions in granite (mostly <250 °C). Contrary to fluid-controlled charnockitization (brines, CO₂) which may have taken place along shear zones away from the intrusive body, the present “proximal” charnockitized granite formed directly at the contact with enderbite. The inclusions indicate contact metamorphism induced by the intrusion of “dry” enderbitic magma into “wet” granite resulting in local dehydration. This was confirmed by cathodoluminescence microscopy showing textures indicative for the local reduction of structural water in the charnockite quartz. Two-pyroxene thermometry on the Port Edward Enderbite suggests intrusion at temperatures of ∼1000–1050 °C into country rock with temperature of <700 °C. The temperature of aureole formation must have been between ∼700 °C (breakdown of pyrite to form pyrrhotite) and ∼1000 °C. Charnockitization was probably controlled largely by heat related to anhydrous intrusions causing dehydration reactions and resulting in the release and subsequent trapping of dehydration fluids. The salinity of the metamorphic fluid in the contact zones is supposed to have been higher at an early stage of contact metamorphism, but it has lost its salt content by K-metasomatic reactions and/or the preferential migration of the saline fluids out of the contact zones towards the enderbite. The low water activity inhibited the localized melting of the granite. Mineral thermobarometry suggests that after charnockite aureole genesis, an isobaric cooling path was followed during which reequilibration of most of the aqueous inclusions occurred. Received: 8 November 1998 / Accepted: 21 June 1999     

Authigenic albite in carbonate rocks – a tracer for deep-burial brine migration?

Euhedral, post-depositional albite from the Eastern and Western Alps, the western Carpathians and some Greek islands was examined petrographically and geochemically to gain insights into the nature of feldspar reactions in carbonate rocks. This study focuses on coarsely crystalline, homogeneously nucleated albite in order to avoid problems related to the presence of inseparable detrital material in fine-grained albite varieties. All albite samples show a very restricted compositional variability and are typically ≥ 99 mol% Ab component. Unit-cell parameters determined by Rietveld analysis are slightly more variable than previously accepted, but confirm high Al–Si ordering characteristic of low albite. The oxygen isotopic composition of albite ranges from + 19·4‰ to + 28·3‰ VSMOW. There is no direct relationship between the δ¹⁸O value and the inferred temperature of albite formation, nor is there one with stoichiometry. The coarse crystal size (up to several millimetres in diameter), petrographic evidence showing albite cross-cutting stylolites, greater abundance of albite in carbonate rocks subject to high-grade diagenetic or weak metamorphic overprinting and available fluid inclusion data suggest that albite precipitation is favoured at higher temperatures in carbonates than in sandstones. Pore fluids were invariably brines, as suggested by the inferred high positive δ¹⁸O_fluid values, the common association of albite-bearing carbonates and evaporites and reports of saline fluid inclusions in albite. The presence of authigenic albite may thus be a useful tracer of palaeobrine–carbonate reactions, particularly in deep-burial and incipient metamorphic settings.     

鲁西峄山花岗岩中粗大钾长石斑晶成因探讨

在鲁西地区新太古代晚期(五台期)峄山花岗岩的黑石查和望子山花岗质岩体的岩石中,钾长石粗大斑晶内有自形程度较高的斜长石等矿物包裹体沿其环带定向排列.根据野外观察及岩石、矿物学特征测试分析,钾长石斑晶属于岩浆结晶形成的原生斑晶,受化学成分及侵位结晶过程中的物理化学条件影响,钾长石的生长速度大于其成核密度,因而形成粗大斑晶.估算岩浆温度＞950℃,钾长石斑晶快速生长时岩浆温度为750℃,过冷度△T≈150℃,基质结晶时岩浆温度为600℃,△T≈300℃.     

Enzymatic methods for the determination of pollution in seawater using salt resistant alkaline phosphatase from eggs of the sea urchin Strongylocentrotus intermedius

A new salt resistant alkaline phosphatase from eggs of the sea urchin Strongylocentrotus intermedius (StAP) has been shown to have a unique property to hydrolyze substrate in seawater without loss of enzymatic activity. The enzyme has pH optimum at 8.0–8.5. Model experiments showed various concentrations of copper, zinc, cadmium and lead added to seawater or a standard buffer mixture to inhibit completely the enzyme activity at the concentrations of 15–150 μg/l. StAP sensitivity to the presence in seawater of metals, pesticides, detergents and oil products appears to be considerably less. Samples of seawater taken from aquatic areas of the Troitsy Bay of the Peter the Great Bay, Japan Sea have been shown to inhibit the enzyme activity; the same was shown for the samples of fresh waters. The phosphatase inhibition assay developed proved to be highly sensitive, technically easy-to use allowing to test a great number of samples.     

Construction of a ‘global standardised growth curve’ (gSGC) for infrared stimulated luminescence dating of K-feldspar

We investigated the infrared stimulated luminescence (IRSL) and post-infrared IRSL (pIRIR) signals emitted by K-feldspars from sedimentary samples from Asia, Europe and Africa using a single-aliquot multiple elevated temperature (MET) stimulation procedure. For separate aliquots of the same sample, we show that variation among the dose response curves (DRCs), or growth curves, constructed from the regenerative dose signal (L_x), the test dose signal (T_x, an indicator of luminescence sensitivity) and the sensitivity-corrected signal (L_x/T_x) can be largely eliminated by normalising the DRCs using one of the regenerative dose signals; we call this procedure ‘regenerative-dose normalisation’ or re-normalisation. Furthermore, for the MET-pIRIR signals measured at 250 °C, we find that different samples have re-normalised DRCs that follow the same growth function, despite the samples differing significantly in terms of their geological provenance, sedimentary context, equivalent dose (D_e) and luminescence sensitivity. This common feature offers the potential to establish a ‘global standardised growth curve’ (gSGC) for different samples of K-feldspar, and thereby enable D_e values to be estimated for a large number of single aliquots by projecting the re-normalised natural signals on to the gSGC. For the 18 samples investigated in this study, we find that D_e estimates obtained from the gSGC are consistent with those obtained using full single-aliquot regenerative dose (SAR) procedures for doses of up to ∼1600 Gy. The establishment of a gSGC would greatly reduce the time required to date older samples using K-feldspar, as regenerative doses of several hundreds to a few thousands of Gy are typically delivered to each aliquot in each SAR cycle.     

Feldspar multi-elevated-temperature post-IR IRSL dating of the Wulanmulun Paleolithic site and its implication

The Wulanmulun site found in 2010 is an important Paleolithic site in Ordos (China), from which lots of stone and bone artifacts and mammalian fossils have been recovered. It was previously dated by radiocarbon and optically stimulated luminescence (OSL) techniques on quartz. To further confirm the reliability of the chronology constructed based on OSL ages and test the applicability of the recently developed pIRIR procedure on sediments from northern China, twenty-four sediment samples (including eolian, lacustrine and fluvio-eolian sands) from the site were determined using the multi-elevated-temperature post-IR IRSL (MET-pIRIR or pIRIR) procedure on potassium feldspar. The results show that the studied samples have two MET-pIRIR D_e preheat plateaus (280–320 and 340–360 °C), and the bleaching rates of the luminescence signals are associated with sample ages and stimulation temperatures. All the pIRIR ages (7–155 ka) corrected for anomalous fading and residual dose obtained after solar bleaching for 15 h are larger than the corresponding quartz OSL ages (4–66 ka) previously determined, even for the young eolian samples (<10 ka). But the corrected IRSL(50 °C) ages (6–85 ka) are broadly consistent with the quartz ages. It appears that the IRSL(50 °C) ages are more reliable, although this contradicts the previously results obtained by other people. On the other hand, we also obtained an extended age plateau between the stimulation temperatures of 50 and 290 °C in the plot of age versus stimulation temperature (A-T plot) by subtracting different residual doses obtained after different bleaching times. The reliability of the plateau ages requires further investigation. For the sediment samples from this site, quartz should be more suitable for dating than K-feldspar, and the quartz OSL ages of 50–65 ka for its cultural layer should be reliable.     

The Engineer Mine,British Columbia: An example of epithermal Au-Ag mineralization with mixed alkaline and subalkaline characteristics

The Engineer Mine epithermal precious metal deposit in British Columbia, Canada, is related to Eocene Sloko-Skukum-Group (SSG) volcanism and, according to previous studies, contains roscoelite in intimate association with electrum. Roscoelite, a vanadian mica, is considered characteristic of low-sulfidation epithermal deposits related to alkaline magmatism. This contradicts the fact that the SSG volcanics are subalkaline. In order to address this ambiguity and to accurately classify the style of epithermal mineralization at the Engineer Mine we conducted detailed petrographic, mineralogical, geochronological, fluid inclusion, and stable isotope studies.The principal ore assemblage of the Engineer Mine epithermal veins precipitated in response to boiling during a hydrothermal event at 49.90 Ma ± 0.25 Ma. During this event electrum, arsenopyrite, pyrite ± chalcopyrite ± sphalerite ± löllingite ± tetrahedrite-group phases ± allargentum ± acanthite ± hessite ± dyscrasite ± stibarsen ± galena and an unidentified Ag-rich phase were deposited in conjunction with amorphous silica, platy and rhombic calcite, K-feldspar, and vanadian illite. Fluid inclusion and stable isotope data suggest that the ore-forming fluid was boiling at ∼220 °C during vein mineralization and had an isotopic composition derived from local meteoric water. Based on these results the Engineer Mine is classified as an epithermal low-sulfidation deposit, which shares similarities with alkaline and subalkaline epithermal low-sulfidation deposits. This is attributed to the fact that the SSG volcanic rocks are borderline subalkaline to alkaline in character and that the sedimentary host rocks are vanadium-bearing. These sedimentary rocks contributed the bulk of the vanadium to the Engineer Mine epithermal system. The presence of roscoelite at the Engineer Mine could not be confirmed during this study. The mica referred to as roscoelite in previous publications instead is vanadian illite. To our knowledge the only alkaline low-sulfidation epithermal precious metal deposit that contains V-mica which exclusively qualifies as true roscoelite is the Porgera deposit, Papua New Guinea.     

Au-Pb compounds in nature: A general overview and new evidence from the Inagli Pt–Au placer deposit,the Aldan Shield,Russia

This study presents a new and first finding of Au-Pb intermetallic compounds in the Inagli Pt–Au placer deposit, the Republic of Sakha (Yakutia), Russia. This is the first time that all three accepted minerals (hunchunite, anyuiite and novodneprite), as well as unnamed Au-Pb intermetallics, corresponding in composition to Au_1.5Pb and AuPb, are present together in the same locality. We provide chemical compositions of Au-Pb compounds and host gold particles, describe morphology and relationships between different mineral phases. We also present an unexpected finding of unusual inclusion of Pb-Fe-aluminosilicate associated with K-feldspar and anyuiite in the gold grain. The new data together with data from other occurrences of Au-Pb compounds worldwide were reviewed to discuss type localities, mineralogy, conditions and possible mechanisms of formation of Au-Pb intermetallics and to provide an overview of current knowledge about these uniquely rare but naturally occurring minerals.     

Current impact of mining alkaline rocks on Save River water quality in Zimbabwe

Alkaline rocks (phosphate deposits in particular) of igneous origin are currently being mined in Zimbabwe. Exploitation of these deposits, which are associated with metals and non-metals, provides a potential for changing the river water quality in the surrounding areas by increasing metal and phosphates levels in the water, thereby endangering the beneficial use of the river. The aim and objectives of this paper are to enumerate the current impacts associated with mining alkaline rocks on Save River water quality in Zimbabwe using the Dorowa mine as a case study. Though there are several impacts associated with the mining of alkaline rocks, this paper deals only with impacts on water quality.A preliminary assessment of the water quality in the Save River downstream of the Dorowa phosphate mine showed an increase in conductivity, iron content, manganese content, nitrates and hardness when compared to those taken before mining activity began. However, there was no notable increase in phosphate and metals except for Fe and Mn. A plausible explanation for the low phosphate values in the water is that the phosphates are precipitating and settling as sediments. Phosphate is known to effectively remove metals from the surface water through the formation of metal–phosphate minerals. Thus, various pollutants may be adsorbed into sediments accumulated on the bottom of the river. These sediments may accumulate pollutants over long periods and act as new pollutant sources to the overlying water when phosphate desorbs from sediments due to changes in water conditions. Therefore, the sediments can act as a source of water pollution in the future.     

云南维西格坡洛斑岩型锑矿矿床成因

锑矿化集中于喜马拉雅期石英斑岩内接触带,存在矿源层形成、充分分异及近地表成矿三个阶段。可作为滇西碱性岩锡矿床典型。