基于组合楔形体原理的采动坡体稳定性研究

地下采煤通常会引起地表严重开裂,甚至发生滑坡、崩塌等地质灾害,采动坡体的稳定性研究一直是工程实际关心的问题。本文以贵州省都匀市煤洞坡采动坡体为例,在斜坡破坏机制分析基础上,采用组合楔形块体原理构建了采动坡体稳定性系数计算方程,并从实验、经验类比、采空率等方面对采动坡体的强度指标进行了综合取值,计算了采动坡体在天然、饱水及裂隙水作用下的安全系数。结果表明:煤洞坡山体是处于稳定状态的,这与坡体上的裂缝位移监测成果是相符的。但在长时间降雨或暴雨情况下,煤洞坡山体稳定性就会逐渐变差,甚至发生滑动; 坡体稳定性安全系数随内摩擦角的降低而降低,随裂隙水充水高度的增加而降低; 一旦后缘块体挤压前缘块体时,就会存在一个安全系数急剧降低的阀值。从裂缝水柱高度与降雨渗入裂缝的雨水量关系出发,建立了裂缝水柱高与降雨量之间关系式。经计算当降雨量(短时间内)超过192mm,斜坡就会失稳。     

How many sutures in the southern Central Asian Orogenic Belt：Insights from East Xinjiang-West Gansu（NW China）？

How ophiolitic mèlanges can be defined as sutures is controversial with regard to accretionary orogenesis and continental growth.The Chinese Altay,East junggar,Tianshan,and Beishan belts of the southern Central Asian Orogenic Belt（CAOB） in Northwest China,offer a special natural laboratory to resolve this puzzle.In the Chinese Altay,the Erqis unit consists of ophiolitic melanges and coherent assemblages,forming a Paleozoic accretionary complex.At least two ophiolitic melanges（Armantai,and Kelameili） in East Junggar,characterized by imbricated ophiolitic melanges,Nb-enriched basalts,adakitic rocks and volcanic rocks,belong to a Devonian-Carboniferous intra-oceanic island arc with some Paleozoic ophiolites,superimposed by Permian arc volcanism.In the Tianshan,ophiolitic melanges like Kanggurtag,North Tianshan,and South Tianshan occur as part of some Paleozoic accretionary complexes related to amalgamation of arc terranes.In the Beishan there are also several ophiolitic melanges,including the Hongshishan,Xingxingxia-Shibangjing,Hongliuhe-Xichangjing,and Liuyuan ophiolitic units.Most ophiolitic melanges in the study area are characterized by ultramafic,mafic and other components,which are juxtaposed,or even emplaced as lenses and knockers in a matrix of some coherent units.The tectonic settings of various components are different,and some adjacent units in the same melange show contrasting different tectonic settings.The formation ages of these various components are in a wide spectrum,varying from Neoproterozoic to Permian.Therefore we cannot assume that these ophiolitic melanges always form in linear sutures as a result of the closure of specific oceans.Often the ophiolitic components formed either as the substrate of intra-oceanic arcs,or were accreted as lenses or knockers in subduction-accretion complexes.Using published age and paleogeographic constraints,we propose the presence of （1） a major early Paleozoic tectonic boundary that separates the Chinese Altay-East Junggar multiple subduction system     

Structural analysis of a newly emerged accretionary prism along the Jinlun-Taimali coast,southeastern Taiwan: From subduction to arc-continent collision

In southern Taiwan the initial collision of the Luzon volcanic arc with the passive continental margin of China results in the emergence of an accretionary prism of, predominantly, turbidites in composition, thus providing an appropriate place to study the temporal and spatial variation of deformation during the transition of subduction to arc-continent collision. Field surveys have recently been carried out in slightly metamorphosed rocks along the well-exposed Jinlun-Taimali coast in southeastern Taiwan. Three folding phases are identified in the area. The first phase is characterized by gently dipping but widely distributed phyllitic cleavage (S₁). The second phase is represented by sparsely distributed crenulation cleavage (S₂) that folded the phyllitic cleavage. The third phase is characterized by E–W trending antiforms (F₃) that involved both types of pre-existing cleavages. Restoration of such an antiform in the north using a method proposed in this paper reveals that phyllitic cleavage in the overturned beds dips gently towards the southeast or east-southeast before the antiform, in relation to the first-phase thrusting or folding under regional ESE-WNW compression. From the first to third phase, the maximum horizontal compression underwent an about 90° anticlockwise rotation from ESE-WNW to E–W or NE–SW to N–S, and the deformation depth seems to decrease drastically, in terms of the decreasing proportion of pervasive deformation. All these variations are attributed to the oblique arc-continent collision that exhumed the whole accretionary prism and induced a local stress perturbation in southeastern Taiwan.     

Wet and Dry Basalt Magma Evolution at Torishima Volcano, Izu Bonin Arc, Japan: the Possible Role of Phengite in the Downgoing Slab

The arc-front volcanoes of Sumisu (31·5°N, 140°E)and Torishima (30·5°N, 140·3°E) in thecentral Izu–Bonin arc are similar in size and rise asrelatively isolated edifices from the seafloor. Together theyprovide valuable along-arc information about magma generationprocesses. The volcanoes have erupted low-K basalts originatingfrom both wet and dry parental basaltic magmas (low-Zr basaltsand high-Zr basalts, respectively). Based on models involvingfluid-immobile incompatible element ratios (La/Sm), the parentalbasalts appear to result from different degrees of partial meltingof the same source mantle (20% and 10% for wet and dry basaltmagmas, respectively). Assuming that the wet basalts containgreater abundances of slab-derived components than their drycounterparts, geochemical comparison of these two basalt typespermits the identification of the specific elements involvedin fluid transport from the subducting slab. Using an extensiveset of new geochemical data from Torishima, where the top ofthe downgoing slab is about 100 km deep, we find that Cs, Pb,and Sr are variably enriched in the low-Zr basalts, which cannotbe accounted for by fractional crystallization or by differencesin the degree of mantle melting. These elements are interpretedto be selectively concentrated in slab-derived metasomatic fluids.Variations in K, high field strength element and rare earthelement concentrations are readily explained by variations inthe degree of melting between the low- and high-Zr basalts;these elements are not contained in the slab-derived fluids.Rb and Ba exhibit variable behaviour in the low-Zr basalts,ranging from immobile, similar to K, to mildly enriched in somelow-Zr basalts. We suggest that the K-rich mica, phengite, playsan important role in determining the composition of fluids releasedfrom the downgoing slab. In arc-front settings, where slab depthis 100 km, phengite is stable, and the fluids released fromthe slab contain little K. In back-arc settings, however, wherethe slab is at 100–140 km depth, phengite is unstable,and K-rich fluids are released. We conclude that cross-arc variationsin the K content of arc basalts are probably related to differingcompositions of released fluids or melts rather than the widelyheld view that such variations are controlled by the degreeof partial melting. KEY WORDS: arc volcano; degrees of melting; mantle wedge; water; wet and dry basalts     

Tectono-magmatic evolution from accretion to collision in the southern margin of the Central Asian Orogenic BeltSCIEI北大核心CSCD

造山带演化及增生到碰撞的转变是板块构造与大陆动力学研究中的前沿科学问题。中亚造山带被认为是古亚洲洋长期俯冲-增生演化形成的显生宙最大的增生造山带,以发育巨量的面状展布的俯冲-增生相关的弧岩浆岩为特征。并且,由于中亚增生型造山带在潘吉亚最后聚合过程中发生弧弧(陆)碰撞,因此缺乏大规模且跨构造单元的碰撞相关的构造和变质等物质标志。显然,能否识别出大洋闭合期间碰撞作用的岩浆标志成为确定增生造山带增生过程终止的关键之一。本文系统研究确定:中亚造山带东南缘二叠纪到三叠纪钙碱性-碱钙性岩浆在空间分布上显示出由北西向南东迁移演化的特征;在岩浆性质上具有从二叠纪新生地壳来源的弧岩浆向早-中三叠世碰撞挤压背景下古老陆壳组分逐渐增多的高Sr/Y岩浆以及晚三叠世后造山伸展相关的A型花岗岩演化的特征。这些特征提供了俯冲-增生向碰撞造山演变的关键岩浆岩证据。结合区域资料,厘定出增生造山带最后碰撞相关的标志性岩浆为沿缝合带呈零星线性展布的增厚下地壳源区的高Sr/Y花岗岩类,构建了中亚造山带南缘从双向俯冲-增生到增生楔-增生楔碰撞及后造山伸展的三阶段构造-岩浆演化模型。系统对比研究,揭示出增生-碰撞相关的岩浆记录沿横向展布在中亚造山带南缘甘肃北山到吉林中部一带,表明碰撞挤压相关的岩浆作用在中亚造山带南缘具有一定的普适性。中亚造山带南缘从增生到碰撞的岩浆演化记录的厘定,证实显生宙最大的巨型增生造山带演化末期经历了碰撞造山作用,对进一步深入探索增生造山演化末期碰撞相关的标志性岩浆具有重要意义。     

The Himalayan Collisional Orogeny: A Metamorphic Perspective

This paper introduces how crustal thickening controls the growth of the Himalaya by summarizing the P-T-t evolution of the Himalayan metamorphic core. The Himalayan orogeny was divided into three stages. Stage 60–40 Ma: The Himalayan crust thickened to ~40 km through Barrovian-type metamorphism (15–25 °C/km), and the Himalaya rose from <0 to ~1000 m. Stage 40–16 Ma: The crust gradually thickened to 60–70 km, resulting in abundant high-grade metamorphism and anatexis (peak-P, 15–25 °C/km; peak-T, >30 °C/km). The three sub-sheets in the Himalayan metamorphic core extruded southward sequentially through imbricate thrusts of the Eo-Himalayan thrust, High Himalayan thrust, and Main Central thrust, and the Himalaya rose to ≥5,000 m. Stage 16–0 Ma: the mountain roots underwent localized delamination, causing asthenospheric upwelling and overprinting of the lower crust by ultra-high-temperature metamorphism (30–50 °C/km), and the Himalaya reached the present elevation of ~6,000 m. Underplating and imbricate thrusting dominated the Himalaya’ growth and topographic rise, conforming to the critical taper wedge model. Localized delamination of mountain roots facilitated further topographic rise. Future Himalayan metamorphic studies should focus on extreme metamorphism and major collisional events, contact metamorphism and rare metal mineralization, metamorphic decarbonation and the carbon cycle in collisional belts.     

Petrogenesis of Late Ordovician intrusive rocks in the West Kunlun orogenic belt: Constraints on the subduction process of the Proto-Tethys OceanSCIEI北大核心CSCD

西昆仑造山带发育有大量的早古生代岩浆岩,它们的形成与原特提斯洋俯冲-碰撞密切相关,然而,对于这些岩浆岩的岩石成因和形成的构造背景仍然存在较大的争议。本文对西昆仑造山带早古生代阿喀孜二长岩和赛图拉石英闪长岩岩体开展了详细的矿物学、锆石U-Pb年代学、全岩地球化学和Sr-Nd-Hf-O同位素研究,以探讨这些侵入岩的岩浆源区与成因,揭示原特提斯洋在这一时期的构造演化过程。这两个岩体的LA-ICP-MS锆石U-Pb年龄分别为456±2Ma和452±2Ma,指示它们形成于晚奥陶世。阿喀孜二长岩具有富碱(K_(2)O+Na_(2)O=10.5%~11.8%)、富钾(K_(2)O/Na_(2)O=1.20~1.44)特征,相对低MgO(0.89%~0.97%)、TiO_(2)(0.42%~0.45%)含量,富集Rb、Th、U等大离子亲石元素,且具有较高的全岩锆饱和温度(T_(Zr)=814~862℃),属于钾质碱性岩石。该岩体具有较高的(^(87)Sr/^(86)Sr)_(i)值(0.72057~0.72186),负的全岩ε_(Nd)(t)值(-5.1~-4.5)和负的锆石ε_(Hf)(t)值(-7.6~-3.4),以及较高的锆石δ^(18) O值(5.39‰~7.94‰),表明其源区可能为伸展环境下古老基性下地壳部分熔融。赛图拉石英闪长岩SiO_(2)含量为56.8%~58.6%,全碱(Na_(2)O+K_(2)O)含量为5.75%~6.39%,具有较低的铝饱和指数(A/CNK=0.85~0.89),相对高的MgO含量(2.93%~3.41%)以及Mg^(#)值(~45),为高钾钙碱性系列岩石。它们富集大离子亲石元素(Rb、Ba、Th)和亏损高场强元素(Nb、Ta、Ti),且具有微弱的Eu异常(δEu=0.72~0.77),类似于俯冲带岩浆岩地球化学特征。这些石英闪长岩具有相对高的(^(87)Sr/^(86)Sr)_(i)比值(0.71317~0.71322),负的全岩ε_(Nd)(t)值(-5.6~-5.1)和负的锆石ε_(Hf)(t)值(-7.8~-2.9),与同时期来源于富集地幔的基性岩同位素特征相似,表明赛图拉石英闪长岩岩浆可能是由俯冲板片流体交代的富集地幔楔部分熔融形成,并在岩浆演化的过程中经历了橄榄石、辉石、角闪石、磷灰石和Fe-Ti氧化物等矿物的分离结晶作用。结合同位素和数字模拟计算(Rhyolite-MELTS)结果表明,赛图拉石英闪长岩可能由塔里木克拉通南缘玄武质岩浆的分离结晶而成。综合前人研究,本文提出晚奥陶世阿喀孜二长岩和赛图拉石英闪长岩形成于原特提斯洋向北俯冲相关的活动大陆边缘环境,该时期原特提斯洋板片回撤,诱发软流圈地幔的上涌,从而产生了大量的弧岩浆岩。     

不同变形速率下前陆褶皱冲断带的发育特征——基于砂箱物理模拟实验研究

构造模拟实验是研究和模拟自然界地质构造现象、变形特征、成因机制和动力学过程的一种物理实验方法。本文基于砂箱构造物理模型高、中、低速7组不同单向挤压速度的构造模拟实验,揭示不同变形速率下砂箱物质变形的几何学、运动学及其演化特征,探讨不同变形速度(尤其是不同量级速度)对前陆褶皱冲断构造变形的重要性。高速单向挤压变形过程中(0.4~0.1mm/s),砂箱模型中石英砂体后缘构造加积强烈,砂体变形主要以楔形体向前扩展变形为主,其构造样式主要表现为前展式叠瓦冲断构造。中速挤压变形过程中(0.05~0.005mm/s),砂体后缘加积相对较弱,构造变形样式主要为砂箱楔形体前缘先形成(前展式为主)逆冲断层,当达到临界楔形体后,反冲断层发育并与前展式逆冲断层构成冲起构造,构造样式上表现为叠瓦构造与冲起构造的无序叠加。低速挤压变形过程中(0.002mm/s),砂箱物质构造样式以典型冲起带为主。由于砂箱模拟过程的时效性,即如何在最有效时间内获得最全面而复杂的演变过程,通过本次系列实验,我们建议将此有效挤压速度设定为0.05~0.005mm/s范围内,可以先后清晰而全面的获得高速和低速挤压下砂体的变形过程和构造样式。     

Clinoform geometry,geomorphology, facies character and stratigraphic architecture of a sand‐rich subaqueous delta: Jurassic Sognefjord Formation,offshore Norway

The integration of core sedimentology, seismic stratigraphy and seismic geomorphology has enabled interpretation of delta‐scale (i.e. tens of metres high) subaqueous clinoforms in the upper Jurassic Sognefjord Formation of the Troll Field. Mud‐prone subaqueous deltas characterized by a compound clinoform morphology and sandy delta‐scale subaqueous clinoforms are common in recent tide‐influenced, wave‐influenced and current‐influenced settings, but ancient examples are virtually unknown. The data presented help to fully comprehend the criteria for the recognition of other ancient delta‐scale subaqueous clinoforms, as well as refining the depositional model of the reservoir in the super‐giant Troll hydrocarbon field. Two 10 to 60 m thick, overall coarsening‐upward packages are distinguished in the lower Sognefjord Formation. Progressively higher energy, wave‐dominated or current‐dominated facies occur from the base to the top of each package. Each package corresponds to a set of seismically resolved, westerly dipping clinoforms, the bounding surfaces of which form the seismic ‘envelope’ of a clinoform set and the major marine flooding surfaces recognized in cores. The packages thicken westwards, until they reach a maximum where the clinoform ‘envelope’ rolls over to define a topset–foreset–toeset geometry. All clinoforms are consistently oriented sub‐parallel to the edge of the Horda Platform (N005–N030). In the eastern half of the field, individual foresets are relatively gently dipping (1° to 6°) and bound thin (10 to 30 m) clinothems. Core data indicate that these proximal clinothems are dominated by fine‐grained, hummocky cross‐stratified sandstones. Towards the west, clinoforms gradually become steeper (5° to 14°) and bound thicker (15 to 60 m) clinothems that comprise medium‐grained, cross‐bedded sandstones. Topsets are consistently well‐developed, except in the westernmost area. No seismic or sedimentological evidence of subaerial exposure is observed. Deposition created fully subaqueous, near‐linear clinoforms that prograded westwards across the Horda Platform. Subaqueous clinoforms were probably fed by a river outlet in the north‐east and sculpted by the action of currents sub‐parallel to the clinoform strike.     

THE SAND WEDGE AND MIRABILITE OFTHE LAST ICE AGE AND THEIR PALEOCLIMATICSIGNIFICANCE IN HEXI CORRIDOR

Sand wedge is formed under the conditions of coldclimate, and is an important basis for reconstructingpaleoenvironment (LI et al., 1990; WANG, 1991 ). Ithas been reported constantly over the last 20 years inthe Qinghai-Xizang (Tibet) Plateau (GUO, 1979; CUl,1983; XU et al., 1984; LIANG et al.,, 1984; PAN etal., 199 ) and North China (YANG et al., 1983; DONGet al., 1985) and Northeast China (GUO et al.,1981 ). We also found fossil sand wedge groups formedin the end of the Late P…