Spatial patterns of ichthyoplankton assemblages in the Río de la Plata Estuary (Argentina–Uruguay)

Two oceanographic surveys were conducted across the salinity gradient of the Río de la Plata Estuary during austral late spring and summer. Ichthyoplankton was dominated by families Sciaenidae, Clupeidae, Engraulidae, Cynoglossidae and Carangidae. The distribution of larval fish assemblages was strongly associated to the salinity structure. Oceanographic conditions were characterized by a large salt wedge (180 km long and a vertical salinity gradient up to 10 units per meter). During both sampling periods each ichthyoplankton assemblage was related to the same region of the salt wedge: the fresh water environment, the bottom salinity front, the mixohaline zone and the outer portion (surface salinity front) of the estuary. Larval assemblages were not related to the thermal structure. Reproductive activity of fishes inside the Río de la Plata Estuary is relatively common (60% of the teleosts sampled use this estuary as a nursery ground). Moreover, the high incidence of pelagic eggs spawners (75% of the species present in the ichthyoplankton) in the Río de la Plata contrasts to the vast majority of estuaries, where this reproductive strategy is poorly represented. Estuarine dynamics plays a dominant role in allowing this reproductive style in this estuary. Spring–summer wind pattern should generate a retentive environment which could minimize advective losses of eggs and larvae to the adjacent ocean.     

黄河口拦门沙与盐水楔特征及其演变

黄河口存在一个成型堆积法，称拦门沙。多次实测结果，其长度约３－７ｋｍ同蛋白质水平宽度与河宽相同，横亘于黄河尾闾与海水相连接处。随着河口延伸，拦门沙也向海推移，淤积最多的 部位是前绝急坡区。     

控制测量课程教学中创新实践案例——以“二等水准测量”教学为例

探讨了控制测量课程中"二等水准测量"教学的创新实践情况,说明此项目学习的必要性,根据此项目教学内容与教学过程中出现的问题,结合学生学习情况,寻找系列教学创新之路,达到使学生学会"二等水准测量"的读数、记录、计算等技能的目的。     

海城震区发现的古地震事件

本文通过海城震区活断层填图工作,在北西西向极震区中部水泉发现一条古地震槽沟.海城7.3级地震地表破裂带受断层槽沟控制.经过人工开挖发现地震断层,其中发育有古地震充填楔.     

Complete 40Ar resetting in an ultracataclasite by reactivation of a fossil seismogenic fault along the subducting plate interface in the Mugi Mélange of the Shimanto accretionary complex,southwest Japan

We used the K–Ar ages of clay-sized mineral grains to investigate the timing of activity on the Minami-Awa Fault, which is a fossil seismogenic fault along a subducting plate interface separating the coherent strata of the Shimanto accretionary complex to the north from the tectonic mélange to the south. The K–Ar ages from the matrix shale of the mélange range from 85 to 48 Ma and decrease with decreasing amount of detrital mica, indicating that they record a mixture of authigenic illite related to burial diagenesis and detrital mica. In contrast, the K–Ar ages of an ultracataclasite within the fault core are significantly younger, ranging from 29 to 23 Ma, and are unrelated to grain size and amount of detrital mica. This indicates that s Ar diffused completely from the ultracataclasite between 29 and 23 Ma, which postdates the formation of authigenic illite by at least several million years. The diffusion of ⁴⁰Ar in the ultracataclasite was probably caused by frictional heating or high-temperature fluid migration that occurred when the fault was reactivated. The results indicate that seismogenic faults that separate tectonic mélange from coherent strata in accretionary complexes may slip, not only during accretion, but also long after accretion.     

Paleoproterozoic migmatitic gneisses from the Tandilia belt (Argentina), Río de la Plata craton,record cooling at deep crustal levels

We studied high-grade metamorphic rocks of the El Cristo hill area of the Tandilia belt. Mineral analyses and thermodynamic calculations were carried out for two adjacent rock samples: an amphibole–biotite gneiss and a garnet–biotite-bearing migmatite. Peritectic garnets in the migmatite show core compositions of pyr_4.5(gro + andr)₁₀spes₆alm_79.5 changing to pyr_3.5(gro + andr)₁₇spes₆alm_73.5 at their thin rims. Garnet compositions in the gneiss are pyr_6.5(gro + andr)₂₆spes₁₂alm_55.5 and pyr_4.5(gro + andr)₃₄spes₁₂alm_49.5 for core and rim, respectively. A P–T path was constructed by calculating pseudosections in the 11-component system Si–Ti–Al–Fe–Mn–Mg–Ca–Na–K–O–H and contouring them by isopleths for garnet components using the PERPLE_X software package. Supra-solidus crystallization of garnet cores in the migmatite began at 5.8 kbar and 660 °C. Garnet rims equilibrated at 7.0 kbar and 640 °C compatible with garnet cores in the amphibole–biotite gneiss (7.6 kbar and 660 °C). The further chemical development of garnet in this rock points to P–T conditions of 11.6 kbar and 620 °C and 12.2 kbar and 595 °C (outermost garnet rim). At this high-pressure stage Ca-amphibole was not stable. Most biotite formed during exhumation whereas the high-pressure accessory minerals, titanite and epidote, persisted. According to the obtained anti-clockwise P–T path the originally partly melted material was tectonically transported from ∼22 km (middle crust) to ∼40 km (lower crust) depths reaching a geothermal gradient as low as 15 °C km⁻¹. This transport probably occurred along a major suture zone, which was active during the Paleoproterozoic (2.25–2.10 Ga), before a terminating collision of terranes near the SW boundary of the Rio de la Plata craton.     

P- and S-velocity images of the lithosphere–asthenosphere system in the Central Andes from local-source tomographic inversion

About 50 000 P and S arrival times and 25 000 values of t * recorded at seismic arrays operated in the Central Andes between 20°S and 25°S in the time period from 1994 to 1997 have been used for locating more than 1500 deep and crustal earthquakes and creating 3-D P , S velocity and Qp models. The study volume in the reference model is subdivided into three domains: slab, continental crust and mantle wedge. A starting velocity distribution in each domain is set from a priori information: in the crust it is based on the controlled sources seismic studies; in slab and mantle wedge it is defined using relations between P and S velocities, temperature and composition given by mineral physics. Each iteration of tomographic inversion consists of the following steps: (1) absolute location of sources in 3-D velocity model using P and S arrival times; (2) double-difference relocation of the sources and (3) simultaneous determination of P and S velocity anomalies, P and S station corrections and source parameters by inverting one matrix. Velocity parameters are computed in a mesh with the density of nodes proportional to the ray density with double-sided nodes at the domain boundaries. The next iteration is repeated with the updated velocity model and source parameters obtained at the previous step. Different tests aimed at checking the reliability of the obtained velocity models are presented. In addition, we present the results of inversion for Vp and Vp/Vs parameters, which appear to be practically equivalent to Vp and Vs inversion. A separate inversion for Qp has been performed using the ray paths and source locations in the final velocity model. The resulting Vp , Vs and Qp distributions show complicated, essentially 3-D structure in the lithosphere and asthenosphere. P and S velocities appear to be well correlated, suggesting the important role of variations of composition, temperature, water content and degree of partial melting.     

改进的楔形岩体稳定性分析方法

楔形岩体的稳定性分析和评价一直是工程界的难点,而传统评价方法又存在种种缺陷。通过编制相关计算机程序,对传统方法进行了多方面的改进,并对建立的块体模型采用矢量代数法计算其稳定性安全系数,基本实现了楔形体稳定性分析与评价过程的自动化。结合工程实例论证了改进方法的可行性和优越性,具有较大的实用价值。     

Sedimentary response to a tectonically induced sea-level fall in a shallow back-arc basin: the Mulichinco Formation (Lower Cretaceous), Neuquén Basin, Argentina

This study examines the sedimentary response to a tectonically driven relative sea‐level fall that occurred in the Neuquén Basin, west‐central Argentina, during the late Early Valanginian (Early Cretaceous). At this time the basin lay behind the emergent Andean magmatic arc to the west. Following the relative sea‐level fall, sedimentation was limited to the central part of the Neuquén Basin, with the deposition of a predominantly clastic, continental to shallow marine wedge on top of basinal black shales. This lowstand wedge is called the Mulichinco Formation and consists of a third‐order sequence that lasted about 2 Myr and contains high frequency lowstand, transgressive, and highstand deposits. Significant variations in facies, depositional architecture, and internal organization of the sequence occur along depositional strike. These variations are attributed mainly to tectonic and topographic controls upon sediment flux, basin gradient, fault tilting, and shifting of the depocentre through time. These controls were ultimately related to asymmetrically distributed tectonic activity that was greater towards the magmatic arc in the west. The superposition of fluvial deposits directly upon offshore facies provides unequivocal evidence for a sequence boundary at the base of the Mulichinco Formation. However, the Mulichinco sequence boundary is marked by shallow, low erosional relief and widespread fluvial deposition. The surface lacks prominent valleys traditionally associated with sequence boundaries. This non‐erosive sequence boundary geometry is attributed to the ramp‐type geometry of the basin and/or rapid uplift that limited stratigraphic adjustment to base‐level fall. Significant along‐strike facies changes and a low‐relief sequence boundary are attributes that may be common in tectonically active, semi‐enclosed basins (e.g. shallow back‐arc basins, foreland basins).     

赤平投影的程序化方法与实现

对于存在构造面岩石边坡的稳定分析 ,赤平投影方法是一种行之有效的方法 ,但是赤平投影理论较为抽象 ,图解方法较为繁琐 ,手工绘制误差较大 ,因此编制了赤平投影程序 ,能够很方便、准确地进行边坡稳定性判断。