Heavy clastic minerals from the Far East island-arc complexes

The results of the study of heavy clastic minerals from the Cretaceous-Paleogene terrigenous complexes of Sikhote-Alin and Kamchatka, as well as from the Cenozoic sediments of the deepwater Vanuatu Trench, are summarized. The data obtained have been interpreted on the basis of their comparison with heavy mineral assemblages of recent sediments deposited in known geodynamic settings. It is shown that the heavy clastic minerals of sedimentary rocks, their relative quantities, and chemical compositions may serve as reliable indicators of different island-arc settings and magmatic processes; these indicators may also be used for identification of such settings in paleobasins of orogenic regions.     

地理信息技术在地籍管理系统中的应用

利用地理信息技术实现图形数据与属性数据完美的结合,维持图形数据和属性数据的一致,可以使建立在其之上的地籍管理系统使用方便、操作直观、快速准确．     

K–Ar ages from seamount chains in the back-arc region of the Izu–Ogasawara arc

The Izu–Ogasawara arc contains, from east to west, a volcanic front, a back-arc extensional zone (back-arc knolls zone), and a series of across-arc seamount chains that cross the extensional zone in an east-northeast and west-southwest direction and extend into the Shikoku Basin. K–Ar ages of dredged volcanic rocks from these across-arc seamount chains and extension-related edifices in the back-arc region of the Izu–Ogasawara arc were measured to constrain the volcanic and tectonic history of the arc since the termination of spreading in the Shikoku Basin. K–Ar ages range between 12.5 and 1 Ma. Andesitic to dacitic rocks of 12.5–2.9 Ma occur mainly on the western part of the chains. The western part of the chains are the locus of volcanism behind the front which erupted mainly calc-alkaline andesitic lavas. The youngest rocks (< 2.8 Ma), characterized by cpx-ol basalt, occur along the western margin of the back-arc knolls zone. Basaltic rocks of 12.5–2.9 Ma have relatively high concentrations of Na₂O (> 2.0 wt%), Zr (> 50 p.p.m.) and Y (> 20 p.p.m.) and low CaO (< 12 wt%). On the other hand, basalts of 2.8–1 Ma have lower Na₂O (< 1.8 wt%), Zr (< 50 p.p.m.) and Y (< 20 p.p.m.), but significantly higher CaO (> 12 wt%). The age inferred for the initiation of back-arc rifting (∼ 2.35–2.9 Ma: Taylor 1992 ) behind the current volcanic arc coincides with the time that basalt chemistry changed drastically (eruption of the low-Na₂O and high-CaO basalt). This implies that post-2.8 Ma volcanism in the back-arc knolls zone is associated with rifting. Similarly, the change in chemical composition might be explained by a different type of source mantle following rift initiation. Volcanism in the western seamounts ceased after the onset of rifting at ∼ 2.8 Ma.     

Arc–arc collision in the Izu collision zone, central Japan, deduced from the Ashigara Basin and adjacent Tanzawa Mountains

The Pleistocene Ashigara Basin and adjacent Tanzawa Mountains, Izu collision zone, central Japan, are examined to better understand the development of an arc–arc orogeny, where the Izu–Bonin – Mariana (IBM) arc collides with the Honshu Arc. Three tectonic phases were identified based on the geohistory of the Ashigara Basin and the denudation history of the Tanzawa Mountains. In phase I, the IBM arc collided with the Honshu Arc along the Kannawa Fault. The Ashigara Basin formed as a trench basin, filled mainly by thin-bedded turbidites derived from the Tanzawa Mountains together with pyroclastics. The Ashigara Basin subsided at a rate of 1.7 mm/year, and the denudation rate of the Tanzawa Mountains was 1.1 mm/year. The onset of Ashigara Basin Formation is likely to be older than 2.2 Ma, interpreted as the onset of collision along the Kannawa Fault. Significant tectonic disruption due to the arc–arc collision took place in phase II, ranging from 1.1 to 0.7 Ma in age. The Ashigara Basin subsided abruptly (4.6 mm/year) and the accumulation rate increased to approximately 10 times that of phase I. Simultaneously, the Tanzawa Mountains were abruptly uplifted. A tremendous volume of coarse-grained detritus was provided from the Tanzawa Mountains and deposited in the Ashigara Basin as a slope-type fan delta. In phase III, 0.7–0.5 Ma, the entire Ashigara Basin was uplifted at a rate of 3.6 mm/year. This uplift was most likely caused by isostatic rebound resulting from stacking of IBM arc crust along the Kannawa Fault which is not active as the decollement fault by this time. The evolution of the Ashigara Basin and adjacent Tanzawa Mountains shows a series of the development of the arc–arc collision; from the subduction of the IBM arc beneath the Honshu Arc to the accretion of IBM arc crust onto Honshu. Arc–arc collision is not the collision between the hard crusts (massif) like a continent–continent collision, but crustal stacking of the subducting IBM arc beneath the Honshu Arc intercalated with very thick trench fill deposits.     

Petrogenesis of the Tanzawa plutonic complex, central Japan: Exposed felsic middle crust of the Izu–Bonin – Mariana arc

The Miocene Tanzawa plutonic complex, consisting mainly of tonalite intrusions, is exposed at the northern end of the Izu–Bonin – Mariana (IBM) arc system as a consequence of collision with the Honshu Arc. The Tanzawa plutonic rocks belong to the calc-alkaline series and exhibit a wide range of chemical variation, from 43 to 75 wt% SiO₂. They are characterized by relatively high Ba/Rb and Ce/Nb ratios, and low abundances of K₂O, LIL elements, and rare earth elements (REE). Their petrographic and geochemical features indicate derivation from an intermediate parental magma through crystal fractionation and accumulation processes, involving hornblende, plagioclase, and magnetite. The Tanzawa plutonic complex is interpreted to be the exposed middle crust of the IBM arc, which was uplifted during the collision. The mass balance calculations, combining data from melting experiments of hydrous basaltic compositions at lower-to-middle crustal levels, suggest that parental magma and ultramafic restite were generated by dehydration partial melting (∼ 45% melting) of amphibolite chemically similar to low-K tholeiitic basalt. Partial melting of hydrated mafic lower crust might play an important role in felsic middle-crust formation in the IBM arc.     

Possible Miocene rifting of the Izu–Ogasawara (Bonin) arc deduced from magnetic anomalies

A magnetic anomaly map of the northern part of the Philippine Sea plate shows two conspicuous north–south rows of long-wavelength anomalies over the Izu–Ogasawara (Bonin) arc, which are slightly oblique to the present volcanic front. These anomalies are enhanced on reduced-to-pole and upward-continued anomaly maps. The east row is associated with frontal arc highs (the Shinkurose Ridge), and the west row is accompanied by the Nishi-Shichito Ridge. Another belt of long-wavelength anomalies very similar to the former two occurs over the Kyushu–Palau Ridge. To explain the similarity of the magnetic anomalies, it is proposed that after the spreading of the Shikoku Basin separated the Izu–Ogasawara arc from the Kyushu–Palau Ridge, another rifting event occurred in the Miocene, which divided the Izu–Ogasawara arc into the Nishi-Shichito and Shinkurose ridges. The occurrence of Miocene rifting has also been suggested from the geology of the collision zone of the Izu–Ogasawara arc against the Southwest Japan arc: the Misaka terrain yields peculiar volcanic rocks suggesting back-arc rifting at ～ 15 Ma. The magnetic anomaly belts over the Izu–Ogasawara arc do not extend south beyond the Sofugan Tectonic Line, suggesting a difference in tectonic history between the northern and southern parts of the Izu–Ogasawara arc. It is estimated that the Miocene extension was directed northeast–southwest, utilizing normal faults originally formed during Oligocene rifting. The direction is close to the final stage of the Shikoku Basin spreading. On a gravity anomaly relief map, northeast–southwest lineaments can be recognized in the Shikoku Basin as well as over the Nishi-Shichito Ridge. We thus consider that lines of structural weakness connected transform faults of the Shikoku Basin spreading system and the transfer faults of the Miocene Izu–Ogasawara arc rifting. Volcanism on the Nishi-Shichito Ridge has continued along the lines of weakness, which could have caused the en echelon arrangement of the volcanoes.     

Geochemical characterization of Archaean amphibolites from the eastern part of Anshan–Benxi iron producing area,northeastern China: implication for tectonic setting of BIFs

The Anshan–Benxi iron producing area, which is located at the northeastern margin of the North China Craton, is the main distribution area of Archaean BIFs in China. In their eastern part, including the Gongchangling and Waitoushan deposits, BIFs mainly are hosted in the Archaean middle Anshan Group. Amphibolites are widely distributed in the iron‐bearing rock series, reflecting the tectonic setting of BIFs. Amphibolites not only have MORB‐like compositional characteristics, but also have island arc‐like ones, and they are consistent with back‐arc basin basalts (BABB). In the study area, the protolith of amphibolites belongs to Okinawa‐type BABB; it indicates that tectonic setting of BIFs is the intra‐continental back‐arc basin. In the study area, the formation of sedimentary basins for BIFs had been associated with oceanic plate subduction. Amphibolites from Gongchangling deposit are characterized by relative enrichments in LILE and LREE, and depletions in HFSE. This indicates that they had a relatively large influence of subduction in their formation. Amphibolites from Waitoushan deposit are characterized by relative enrichments in LILE without conspicuous depletions in HFSE, indicating relatively low subduction rates. Copyright © 2015 John Wiley & Sons, Ltd.     

松潘—甘孜褶皱带较场弧形构造特征及其大地构造意义

根据详细野外露头特征及显微构造特征将较场弧形带由南向北分为三个变形带:弧顶部、弧核部和弧翼部,不同分带具有明显不同的变形特征。由南向北变形特征由以塑性变形为主过渡为脆性变形为主,变质流体活动喜马拉雅构造期活动强烈,且向北逐渐增强;弧核部以叠瓦状逆冲构造特征分隔弧顶和弧翼部;弧翼部东西两翼变形及变质流体活动特征具有一定差异性。较场弧形带总体体现出多期次南北向挤压—张性应力变形构造特征,叠加北西—北北西向同构造期挤压变质运动,其宏观和微观变形特征与典型"走滑成因"模式弧形构造特征相异,为其大地构造成因机制的解释提出了新的限制条件。     

关于南天山碰撞造山时代的讨论

南天山是天山山脉的一支,是中亚型造山带的典型代表,它经历了复杂的增生—碰撞过程。关于古南天山洋最终闭合—碰撞造山(碰撞事件)发生的时间一直存在不同的认识,争论由来已久。综合分析南天山造山带的构造、地层、古生物、岩石、地球化学和同位素年代学等方面的资料,特别是对放射虫、蛇绿岩、蓝片岩、火山弧及前陆盆地沉积等地质事实的研究,我们认为,南天山碰撞造山作用起始于二叠纪末—三叠纪初。     

双翼弧平式长螺旋锚杆成孔钻具工艺技术研究

通过对以往黏性土层锚杆钻具成孔出现的问题分析,查明了常规取芯钻具与短螺旋钻具在水平方向小角度成孔过程中,土体失去了原始均衡应力造成钻孔缩径,使扰土不能及时输出孔外,是产生堵孔塌孔的直接原因.为此研制了长螺旋锚杆成孔钻具,解决了成孔时扰土输出问题,创新的旋板解决了钻孔内壁土颗粒结构松弛问题,并且彻底解决了在黏性土层中锚杆成孔塌堵现象,保证锚杆成孔设计角度,形成一套较为标准的长螺旋锚杆钻具成孔操作规则.