喜马拉雅山南部的构造复杂性

根据对恒河盆地西部的多振型宽频带面波频散资料的分析推断,该区的地壳结构不具有大陆地盾的特征,相反,却非常象某些海洋高地。这一异常的海洋型地壳与恒河盆地东部地盾地壳的分界线可能在阿拉瓦利山脉（Aravalli Ridge）。该处地壳的地质特征具有异常高的电导率,其走向垂直于喜马拉雅山脉。目前广为接受的假定认为是构造均匀的印度大陆岩石圈向喜马拉雅山下俯冲。本文的研究结果对此观点提出了置疑:在北部印度大陆内的地壳运动可能存在着差异。我们追溯印度-欧亚大陆的碰撞历史,这个因素恐怕是不容忽视的。     

广西弧形构造探讨

广西构造实为一弧形构造,它由四个并排的北东—北西向的轭状弧带所组成。每个弧带的前部,为坚硬的岩块所组成,所产生的断裂及岩浆活动对寻找与火成岩有关的矿产有一定意义。每个弧带的后部,产生盆地型沉积,有利于沉积矿产的形成。     

求解非线性有限元方程的弧长法及在工程稳定分析中的应用

本文讨论了求解非线性有限元方程弧长法的基本原理及具体实施,并应用于压杆及滑块的稳定性分析。由于弧长法具有确定并通过结构临界应力状态的临界荷载值,因此可以应用于工程稳定性分析。算例表明,弧长法确定的临界荷载值是令人满意的。     

Metamorphism and granite genesis in the Hidaka Metamorphic Belt, Hokkaido, Japan

The Main Zone of the Hidaka Metamorphic Belt is an uplifted crustal section of island-arc type. The crust was formed during early Tertiary time, as a result of collision between two arc–trench systems of Cretaceous age. The crustal metamorphic sequence is divided into four metamorphic zones (I–IV), in which zone IV is in the granulite facies. A detailed study of the evolution of the Hidaka Belt, based on a revised P–T–t analysis of the metamorphic rocks, notably a newly found staurolite-bearing granulite, confirms a prograde isobaric heating path, after a supposed event of tectonic thickening of accretionary sedimentary and oceanic crustal rocks. During the peak metamorphic event (c. 53 Ma), the regional geothermal gradient attained 33–40° C km^?1, and the highest P–T condition obtained from the lowest part of the granulite unit is 830° C, 7 kbar. In this part, X_H2O of Gt–Opx–Cd gneiss is about 0.15 and that of Gt–Cd–Bt gneiss is 0.4. The P–T–X_H2O condition of the granulite unit is well within a field where fluid-present partial melting of pelitic and greywacke metamorphic rocks takes place. This is in harmony with the restitic nature of the Gt–Opx–Cd gneiss in the lowest part of the granulite unit. The possibility that partial melting took place in the Main Zone is significant for the genesis of the peraluminous (S-type) granitic rocks within it. The S-type granitic rocks in this zone are Opx–Gt–Bt tonalite in the granulite zone, Gt–Cd–Bt tonalite in the amphibolite zone, and Cd–Bt–Mus tonalite in the Bt–Mus gneiss zone. The mineralogical and chemical nature of these strongly peraluminous tonalitic rocks permit them to be regarded as having been derived from S-type granitic magma generated by crustal anatexis of pelitic metamorphic rocks in deeper crust.     

华南叠加-重熔型花岗岩的成生机制

南岭成矿带是太平洋及印度洋板块对中国大陆板块联合作用的结果。囊括大量稀有-有色金属矿床的中心弧形构造-岩浆岩系正是这个“钳式”应力场作用的集中体现,“深部叠加-重熔”——以板块持续运动和相对高速率运动产生并贮集能量为前提,以俯冲板块不断带入新的挥发物质为条件,随着动力热和挥发组分的不断回流—汇集—贮集而使仰冲板块深部预热的原地或途中固化-半固化的先期熔融的岩浆岩发生了二次甚至多次的熔融作用。     

华北块体(地台)北缘几个地质问题的探讨及其成矿作用

本文以卫星图象信息为依据,结合野外调研,提出并确定了华北块体北缘存在:块体缝合线,褶皱-逆掩断层带,后孤碰撞带(断裂带),台槽过渡带,岩浆弧,以及燕山-喜山期的NNE向岩浆活动带、断陷带(断陷盆地)等双重构造的新认识。并在此基础上,对华北块体北缘与深成岩浆岩,燕山期岩浆活动带(包括火山岩带)有关的铀矿化作用的独特构造环境及“岩浆”型,断陷带中和面型等主要铀矿床成矿模式和铀成矿带的划分及其划分依据作了研究和探讨。并以铀矿床的实例作为佐证。     

内蒙古中西部多岛海构造演化

内蒙古中西部大陆由一个微大陆、三条弧后盆地和三条火山岛弧,即华北微大陆、白云鄂 傅弧后盆地、白乃庙火山岛弧、温都尔庙弧后盆地、苏尼特左－锡林浩特火山岛弧、贺根山弧后盆 地和二连浩特－锡林郭勒火山岛弧组成。经过了长期而复杂的微大陆和火山弧的裂解、弧后盆地 的消减衰亡及弧－陆和弧－弧碰拉等构造演化,才最终形成今天所见到的这种构造样式。     

Pre-eruptive and syn-eruptive conditions in the Black Butte, California dacite: Insight into crystallization kinetics in a silicic magma system

A series of experiments and petrographic analyses have been run to determine the pre-eruption phase equilibria and ascent dynamics of dacitic lavas composing Black Butte, a dome complex on the flank of Mount Shasta, California. Major and trace element analyses indicate that the Black Butte magma shared a common parent with contemporaneously erupted magmas at the Shasta summit. The Black Butte lava phenocryst phase assemblage (20 v.%) consists of amphibole, plagioclase (core An_77.5), and Fe–Ti oxides in a fine-grained (< 0.5 mm) groundmass of plagioclase, pyroxene, Fe–Ti oxides, amphibole, and cristobalite. The phenocryst assemblage and crystal compositions are reproduced experimentally between 890 °C and 910 °C, ≥ 300 MPa, X_H2O = 1, and oxygen fugacity = NNO + 1. This study has quantified the extent of three crystallization processes occurring in the Black Butte dacite that can be used to discern ascent processes. Magma ascent rate was quantified using the widths of amphibole breakdown rims in natural samples, using an experimental calibration of rim development in a similar magma at relevant conditions. The majority of rims are 34 ± 10 μm thick, suggesting a time-integrated magma ascent rate of 0.004–0.006 m/s among all four dome lobes. This is comparable to values for effusive samples from the 1980 Mount St. Helens eruption and slightly faster than those estimated at Montserrat. A gap between the compositions of plagioclase phenocryst cores and microlites suggests that while phenocryst growth was continuous throughout ascent, microlite formation did not occur until significantly into ascent. The duration of crystallization is estimated using the magma reservoir depth and ascent rate, as determined from phase equilibria and amphibole rim widths, respectively. Textural analysis of the natural plagioclase crystals yields maximum growth rates of plagioclase phenocryst rims and groundmass microlites of 8.7 × 10^− 8 and 2.5 × 10^− 8 mm/s, respectively. These rates are comparable to values determined from time-sequenced samples of dacite erupted effusively from Mount St. Helens during 1980 and indicate that syneruptive crystallization processes were important during the Black Butte eruptive cycle.     

Continuous,Direct Gas-Geochemical Monitoring in Hydrothermal Vents: Installation and Long-Term Operation on Nisyros Island (Greece)

In this paper the installation and long-term operation of a system for continuous monitoring of fumarolic gases is described. Several physicochemical and gas-geochemical parameters such as the concentration of CO₂, H₂S and CO in the fumarolic emissions, as well as the temperatures of the hydrothermal steam and soil in close vicinity of the fumarole and steam pressure are measured in short-time intervals (typically 15 seconds). Data are logged on-site and in parallel transferred to a remote station by digital telemetry. Specially developed software enables the real-time observation of the local conditions in the crater and full bidirectional control of the monitoring system. Fluctuations in the monitored parameters are also reported. From the data presented it can be concluded that environmental conditions (direction and strength of wind, precipitation) will interact with some of the parameters monitored. These influences can only be revealed by continuously operated monitoring systems.