3D gravity modelling for Anyongbok Seamount in the East Sea

A seamount chain with an approximately WNW trend is observed in the northeastern Ulleung Basin. It has been argued that these seamounts, including two islands called Ulleung and Dok islands, were formed by a hotspot process or by ridge related volcanism. Many geological and geophysical studies have been done for all the seamounts and islands in the chain except Anyongbok Seamount, which is close to the proposed spreading ridge. We first report morphological characteristics, sediment distribution patterns, and the crustal thickness of Anyongbok Seamount using multibeam bathymetry data, seismic reflection profiles, and 3D gravity modeling. The morphology of Anyongbok Seamount shows a cone shaped feature and is characterized by the development of many flank cones and flank rift zones. The estimated surface volume is about 60 km³, and implies that the seamount is smaller than the other seamounts in the chain. No sediments have been observed on the seamount except the lower slope, which is covered by more than 1,000 m of strata. The crustal structure obtained from a 3D gravity modeling (GFR = 3.11, SD 3.82 = mGal) suggests that the seamount was formed around the boundary of the Ulleung Plateau and the Ulleung Basin, and the estimated crustal thickness is about 20 km, which is a little thicker than other nearby seamounts distributed along the northeastern boundary of the Ulleung Basin. This significant crustal thickness also implies that Anyongbok Seamount might not be related to ridge volcanism.     

A New Fall-Rate Equation for T-5 Expendable Bathythermograph (XBT) by TSK

The accuracy of the manufacturer’s fall-rate equation for the T-5 Model of expendable bathythermograph (XBT) has been investigated based on about 300 collocated pairs of XBT-CTD (Conductivity-Temperature-Depth profiler) measurements in various climatological regions. We found that the equation systematically overestimates depth by about 5% for the T-5 produced by Tsurumi Seiki, Co. Ltd. (TSK), but almost no bias is associated with the T-5 produced by Sippican, Inc., in USA. The cause of this difference is not clear, because the two manufacturers’ T-5 probes are reported to have identical shape and weight in water. We propose a new fall-rate equation for the TSK T-5: z(t) = 6.54071t - 0.0018691t ², where z(t) is depth in meters at time, t, in seconds.     

Stress and deformation of offshore piles under structural and wave loading

Various offshore structures, especially large structures such as Tension Leg Platforms (TLP), are usually supported by concrete piles as the foundation elements. The stress distribution within such a large structure is a dominant factor in the design procedure of an offshore pile. To provide a more accurate and effective design for offshore foundation systems under axial and lateral wave loads, a finite element model is employed herein to determine the stresses and displacements in a concrete pile under similar loading conditions. A parametric study is also performed to examine the effects of the stress distribution due to the changing loading conditions.     

Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Effects of high-order nonlinear interactions on unidirectional wave trains

Numerical simulations of gravity waves with high-order nonlinearities in two-dimensional domain are performed by using the pseudo spectral method. High-order nonlinearities more than third order excite apparently chaotic evolutions of the Fourier energy in deep water random waves. The high-order nonlinearities increase kurtosis, wave height distribution and H_max/H_1/3 in deep water and decrease these wave statistics in shallow water. Moreover, they can generate a single extreme high wave with an outstanding crest height in deep water. High-order nonlinearities (more than third order) can be regarded as one cause of freak waves in deep water.     

注射生物胺对凡纳滨对虾鳃丝离子转运酶活力和血淋巴渗透压的影响

本文研究了注射生物胺(多巴胺、5-羟色胺)对凡纳滨对虾(Litopenaeus vannamei)离子转运酶活力和渗透压的影响。结果表明:注射生物胺(DA、5-HT)对凡纳滨对虾鳃丝总AT- Pase、Na -K -ATPase、V-ATPase活力的影响均显著(P<0．05)．而对HCO3--ATPase活力和渗透压的影响不显著(P>0．05),而对照组渗透生理指标无明显变化。注射DA组AT- Pase、Na -K -ATPase活力在6h内呈峰值变化,分别在1h、3h达到最大值,在6-12h时稳定在对照组水平,12h后逐渐升高,于36h时达到最大值后降低,而V-ATPase活力在实验时间内呈阶段式升高现象,在36h达最大值后降低;注射5-HT组ATPase、Na -K -ATPase活力随取样时间增加而降低．至9h达到最小值,9h后趋于稳定,V-ATPase活力在48h内与对照组差异不显著。注射DA、5-HT处理组血淋巴渗透压分别在6h、9h内呈明显的峰值变化．分别在1h、6h达到最大值,然后分别在6h、9h后趋于稳定,并恢复至对照组水平。     

台风"杜鹃"影响期间福建大风天气的特点及成因

台风“杜鹃”影响期间，福建大风天气出现的比较早，而且范围比较大．本文通过对天气尺度的环境场、具有代表性的单站资料的对比分析，寻求大风出现的原因．还深入利用MM5模式对台风的气压场、风场、流场等进行数值模拟，分析结果表明台湾地形倒槽的形成对此次大风天气出现有着重要的作用，此外从流场分型的角度进一步分析台湾地形倒槽的形成原因．     

合浦珠母贝二倍体、三倍体和非整倍体群体的基因杂合度与生长比较

采用淀粉凝胶电泳方法对合浦珠母贝Pinctadamartensi(D.)雌性三倍体与雄性二倍体交配,细胞松弛素B抑制其受精卵第一极体释放产生的二倍体、三倍体及非整倍体3个群体进行了同工酶研究。二倍体、三倍体及非整倍体群体在6个多态位点的平均基因杂合度分别为0.255±0.087,0.286±0.097,0.275±0.089,三倍体的杂合度高出二倍体约12%,表明多倍体诱导能增加诱导群体的杂合度。但在单个位点上,三倍体的杂合度不一定高于二倍体;在各自群体内,平均杂合位点数与生长间无明显的相关性,单个位点上的杂合子也未完全表现出其生长大于纯合子,且差异不明显(p>0.05)。因此,合浦珠母贝三倍体的快速生长难以完全用杂合度增高假说解释,只能说明诱导处理能使三倍体的杂合度增高,而能量再分配和"巨型性"可能对其快速生长起着不可忽视的作用。非整倍体群体的杂合度高于二倍体群体,但其生长却小于二倍体,其原因可能是染色体的增减对机体的生长有一定的影响。