Cyclone formation and development in the Antarctic Prydz Bay

Using meteorological data of field observation in 1990 - 2000, especially polar orbit high-resolution NOAA satellite cloud maps received from the Antarctic expedition vessel since 1997, the formation and development of the Prydz Bay cyclone are studied in this paper. Some new viewpoints are suggested such as: when surround-polar cyclone enters the Prydz Bay, it can also intensify and develop in summer; cyclone can also develop in the easterlies in this bay. These view points revise old uncom-plete view point that the Prydz Bay is a burial ground of cyclone, and also further consummate formation-development theory of surround-cyclone in the Antarctic westerlies and cyclone in the Antarctic easterlies. In this paper, the mechanism of ice-air-sea interaction in the Prydz Bay is studied, and the physical process of cyclone formation-development is explained. By use of wholly dynamic transportation method, an energy exchange case of a cyclone, which explosively developed after entering the Prydz Bay, is calcu     

Mach Effect of Oblique Nonlinear Irregular Waves Interacting with Vertical Walls

Based on Hong‘s theory, previous random models, and a generalized expression suitable for FIT calculation, the interaction between irregular waves and vertical walls is numerically simulated. The results of simulation demonstrate that the wave energy changes with the incidence angle and the distance from the wall. Particularly, the Mach effect and the combined wave spectrum characteristics are analyzed in detail, which are significant in both theory and practice.     

Fe(OH)_3胶体与铜离子作用的研究

使用切向流超滤系统得到粒度较均匀的Fe(OH)3胶体,进而对Fe(OH)3胶体粒子与Cu2 的作用进行了研究,并将实验结果与南沙群岛海区表层水中铜与胶体物质结合状况的调查数据进行了比较分析,得到如下结果:(1)在海水介质中,铜在Fe(OH)3胶体上结合的百分率(pH>5)随pH的升高而下降,随着Fe(OH)3胶体浓度的减小而下降?(2)在天然海水介质中,使铜在Fe(OH)3胶体上结合的百分率在50%-70%的有机物浓度为1.0mg·L-1,有机物浓度的增大使铜与无机胶体结合的百分率有下降的趋势?     

Sediment Transport in Rivers and Coastal Waters

Following Bagnold's approach, a relationship between sediment transport and energy dissipation is developed. The major assumption made in the study is that the near bed velocity plays a dominant role in the process of sediment transport. A general relationship between energy dissipation and sediment transport is first proposed. Then the equations for total sediment transport are derived by introducing the appropriate expression of energy dissipation rate under different conditions, such as open channel flows, combination of wave and current, as well as longshore sediment transport. Within the flows investigated, the derived relationships are fairly consistent with the available data over a wide range of conditions.     

Monitoring the Kuroshio Extension with Dynamically Constrained Synthesis of the Acoustic Tomography, Satellite Altimeter and in situ Data

A finite-difference quasigeostrophic (QG) model of an open ocean region has been employed to produce a dynamically constrained synthesis of acoustic tomography and satellite altimetry data with in situ observations. The assimilation algorithm is based upon the 4D variational data interpolation scheme controlled by the model's initial and boundary conditions. The data sets analyzed include direct and differential travel times measured at the array of five acoustic transceivers deployed by JAMSTEC in the region of the Kuroshio Extension in 1997, Topex/Poseidon altimetry, CTD soundings, and ADCP velocity profiles. The region monitored is located within the area 27.5°–36.5°N, 143°–155°. The results of assimilation show that mesoscale variability can be effectively reconstructed by five transceivers measuring direct and reciprocal travel times supported by relatively sparse in situ measurements. The misfits between model and data lie within the observational error bars for all the data types used in assimilation. We have compared the results of assimilation with the statistical inversion of travel time data and analyzed energy balances of the optimized model solution. Energy exchange between the depth-averaged and shear components of the observed currents reveals a weak decay of the barotropic mode at the rate of 0.2 ± 0.7⋅10⁻⁵ cm²/s³ due to topographic interaction. Mean currents in the region are unstable with an estimate of the available potential energy flux from the mean current to the eddies of 4.7 ± 2.3⋅10⁻⁵ cm²/s³. Kinetic energy transition has the same sign and is estimated as 2.8 ± 2.5⋅10⁻⁵ cm²/s³. Potential enstrophy is transferred to the mesoscale at a rate of 5.5 ± 2.7⋅10⁻¹⁸ s⁻³. These figures provide observational evidence of the properties of free geostrophic turbulence which were predicted by theory and observed in numerical experiments. This revised version was published online in July 2006 with corrections to the Cover Date.     

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.     

The Working Mechanism and An Analytic Method of the Deep Embedded Large Cylinder Structure

The large cylinder is a new-type structure that has been applied to harbor and offshore engineering. An analytic method of the relationship between loads and the structure displacement is developed based on the failure mode of deep embedded large cylinder structures. It can be used to calculate directly the soil resistance and the ultirnate bearing capacity of the structure under usage. A new criterion of the large cylinder structure, which discriminates the deep embedded cylinder from the shallow embedded cylinder, is defined. Model tests prove that the proposed method is feasible for the analysis of deep embedded large cylinder structures.     

The DNA de-methylating agent 5-azacytidine does not restore CYP1A induction in PCB resistant Newark Bay killifish (Fundulus heteroclitus)

Newark Bay (NB) killifish (Fundulus heteroclitus) have been chronically exposed to environmental contaminants that activate the aryl hydrocarbon receptor (AHR) and are tolerant to toxic effects and CYP1A induction provoked by AHR ligands. Resistance to CYP1A induction could be due to an epigenetic mechanism such as DNA methylation. We measured in-ovo CYP1A catalytic activity (ethoxyresorufin-O-deethylase, EROD) in NB and reference site killifish embryos aqueously exposed to various concentrations of the de-methylating agent 5-azacytidine, 5-AC (5, 50 and 500 μ(micro)M) with or without 0.2 μ(micro)g/l of the CYP1A inducer 3,3^′,4,4^′,5 pentachlorobiphenyl (IUPAC PCB126). Neither PCB126 alone, nor PCB126 plus 5-AC, induced EROD above levels in vehicle treated Newark Bay fish. In reference site fish, the same PCB126 dose provoked a 7.4-fold EROD induction relative to controls. We conclude that Newark Bay killifish are resistant to CYP1A induction by co-planar PCBs during early embryological development and our data suggests that DNA methylation does not play a critical role in resistance to CYP1A induction in this model.     

The intertidal erosion rate of cohesive sediment: a case study from Long Island Sound

Over the past decades, many attempts have been made to generate useful bottom erosion models for the study of cohesive sediment movement. This study addresses some of the key questions involved in determining the functional relationship between erosion rate and bottom shear stress. Current, wave, and turbidity data were collected from a bottom mounted instrument array in a moderately energetic estuarine environment. The bottom shear stress was calculated from a wave–current interaction model. The erosion rate was derived from the observed sediment concentration using a vertical mixing model. Examination of the relationship between erosion rate and bottom stress showed that the erosion rate varied at intertidal frequency. When averaged over the tidal fluctuation, the erosion rate remained approximately constant at low stress, but increased sharply when the shear stress rose above a critical value. This suggests two-stage erosion. The bed has a layered structure, in which a thin layer of loose, high water content material overlies a more consolidated bed. The top layer of high water content material (fluff) was easily disturbed and re-suspended by tidal currents, but the consolidated bottom layer was eroded only under conditions of high shear stress.     

海洋中液-固界面作用的分形研究Ⅰ.SAXS法测量固体交换剂的分维

本文将分形作为一个新概念,应用到海洋化学的液-固界面作用的一系列的研究上。根据用SAXS法测定一些常见的粘土矿物(高岭石,蒙脱石)和水合氧化物(水锰矿、δ-MnO_2、氧化铁凝胶、针铁矿、无定形氧化铁)的分维结果,可将这些结果划分成三类:(1)小尺度模量下具有表面分形;大尺度模量下具有质量分形。(2)只有一种分维值的表面分形。(3)在小尺度模量下和大尺度模量下分别具有不同分维值的表面分形。