武汉地铁及长江隧道沿线地下管线现状分析

本文论述了利用城市地下管线信息系统对武汉地铁和长江隧道沿线进行地下管线现状调查的过程和方法，结果表明利用该系统所完成的分析和成果资料满足了武汉及长江隧道沿线工程可行性研究的需要。     

视电阻率观察中一种抗介质干扰的尝试

埋地金属管线对视电阻率的观测危害甚大。造成观测值大幅改变，跳动，无规律可循。严重时，甚至台站报废，被迫搬迁。通过一些突发事件的启发，结合现场实验，并引证了一些理论计算，笔者摸索出了只须对金属管道作局部微小的改造，就能基本克服其对观测的干扰的方法。该方法在红格台试验半年多来，取得了明显的效果。观测值恢复到安装的水管以前的水平，再无大幅度的跳动。该方法节约经费，简单易行，大大提高了台站在复杂环境中的生存能力。     

Continuous Gradations among Primary Carbonatitic, Kimberlitic, Melilititic, Basaltic, Picritic, and Komatiitic Melts in Equilibrium with Garnet Lherzolite at 3-8 GPa

Multianvil melting experiments in the system CaO–MgO–Al₂O₃–SiO₂–CO₂(CMAS–CO₂) at 3–8 GPa, 1340–1800°C, involvingthe garnet lherzolite phase assemblage in equilibrium with CO₂-bearingmelts, yield continuous gradations in melt composition betweencarbonatite, kimberlite, melilitite, komatiite, picrite, andbasalt melts. The phase relations encompass a divariant surfacein P–T space. Comparison of the carbonatitic melts producedat the low-temperature side of this surface with naturally occurringcarbonatites indicates that natural magnesiocarbonatites couldbe generated over a wide range of pressures >2·5 GPa.Melts analogous to kimberlites form at higher temperatures alongthe divariant surface, which suggests that kimberlite genesisrequires more elevated geotherms. However, the amount of waterfound in some kimberlites has the potential to lower temperaturesfor the generation of kimberlitic melts by up to 150°C,provided no hydrous phases are present. Compositions resemblinggroup IB and IA kimberlites are produced at pressures around5–6 GPa and 10 GPa, respectively, whereas the compositionsof some other kimberlites suggest generation at higher pressuresstill. At pressures <4 GPa, an elevated geotherm producesmelilitite-like melt in the CMAS–CO₂ system rather thankimberlite. Even when a relatively CO₂-rich mantle compositioncontaining 0·15 wt % CO₂ is assumed, kimberlites andmelilitites are produced by <1% melting and carbonatitesare generated by even smaller degrees of melting of <0·5%. KEY WORDS: carbonatite; CO₂; kimberlite; melilitite; melt generation     

Torsional dynamic response of a large‐diameter pipe pile in viscoelastic saturated soil

An analytical solution is developed in this paper to investigate the dynamic response of a large‐diameter end‐bearing pipe pile subjected to torsional loading in viscoelastic saturated soil. The wave propagation in saturated soil and pile are simulated by Biot's two‐phased linear theory and one‐dimensional elastic theory, respectively. The dynamic equilibrium equations of the outer soil, inner soil, and pile are established. The solutions for the outer and inner soils in frequency domain are obtained by Laplace transform technique and the separation of variables method. Then, the dynamic response of the pile is obtained on the basis of the perfect contacts between the pile and the outer soil as well as the inner soil. The results in this paper are compared with that of a solid pile in elastic saturated soil to verify the validity of the solution. Furthermore, the solution in this paper is compared with the classic plane strain solution to verify the solution further and check the accuracy of the plane strain solution. Numerical results are presented to analyze the vibration characteristics and illustrate the effect of the soil parameters and the geometry size of the pile on the complex impedance and velocity admittance of the pile head. Finally, the displacement of the soil at different depth and frequency is analyzed. Copyright © 2014 John Wiley & Sons, Ltd.     

X形冻结管温度场变化规律研究

为解决现有冻结管单管冻结能力不强致使增加循环冷媒介质用量和施工耗电的问题,可将传统圆形截面设计成异形截面。对X形截面冻结管作一简单介绍,运用有限元软件对X形截面冻结管单管冻结时的温度场变化规律进行研究,同时与圆形、方形、工字形、T形和Y形冻结管单管冻结时的温度场进行对比分析,主要得出结论为：虽然X形等异形冻结管为非圆形截面,但其冻土帷幕温度也是以冻结管为圆心呈同心圆分布,离冻结管越近温度越低;冻结20天时,X形冻结管-10 ℃圆形冻土帷幕半径发展到200 mm,冻结30天时发展到240 mm,冻结40天时达到约300 mm;与圆形冻结管相比,异形冻结管在保证冻结效果的基础上可大大减少施工耗电量,经济效益显著。     

辐射井技术在尾矿库降排水工程中的应用

尾矿库是我国重大危险源之一,而尾矿库内的浸润线又是坝体安全的重要指标之一,为有效排出尾矿中的水,降低尾矿库内浸润线,本文通过辐射井技术在尾矿库降排水工程中应用的多个成功工程实例,归纳、总结并提出该技术在尾矿库应用过程中的设计思路、施工要点及工艺方法等。     

水平定向钻进铺管技术在盐碱地改良中的应用

土壤盐碱化作为一种渐进性环境地质灾害,已严重制约着人类生活与社会经济的发展,对盐碱地实施改良和微咸水开发利用已成为世界关注的热点。以往的盐碱地改良多用明渠、暗管排水、暗管结合大口径竖井抽排、种植耐碱性植物等方法,明渠及埋设暗管对地表的开挖破坏性极大、且排水量及适用深度有限、植物改良存在周期长、费时费力等诸多缺点。水平定向钻进铺管技术可将滤水管以水平或近似水平安装在含水层中（水平井）,可垂直于含水层流向长距离铺设,与传统改良方式相比能获得较大的出水量、成本低、且施工对环境影响小等诸多优势,工程实例证明,该施工工艺技术为盐碱地改良、地下咸水开发利用、浅层低渗透性地下水资源开采等提供了较理想的工艺方法。     

定向钻进敷设电缆保护管轨迹优化设计研究

在老旧城区内采用定向钻进敷设地下管线,常常需要从已有的各类地下建（构）筑物或管线下方穿过,方案设计时就应考虑新建管道与之安全距离的取值问题。以厦门市某110 kV电力电缆的定向钻进工程的实际需求为出发点,在对国内现有规程规范及工程实例调查的基础上,对电力电缆保护管定向钻进敷设安全距离取值的影响因素进行分析,优化工程定向钻进敷设方案,指导该工程的建设,并为类似工程建设提供参考。     

腐蚀管道在内压和轴向压力影响下的弯曲破坏

运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。     

钻井利器的故事之“铝合金钻杆”

地球科学的发展对地球深部数据的依赖程度越来越高,作为“入地”重要手段的科学超深井工程是研究深部地质学的重要方法,被誉为是“伸入地壳的望远镜”。与钢钻杆相比,铝合金钻杆以其独特的优越性(质量轻、比强度高、钻进深度深、所需能耗少),已成为难进入地区、大位移井、超深井等钻柱设计的优选方案。本文从科普的角度介绍了钻柱与钻杆的区别、钻柱的使用极限长度、铝合金钻杆的技术优势及其现存的不足之处,以此提高对铝合金钻杆的认识,促进铝合金钻杆的研究和发展。