安徽凤阳和张八岭地区含金石英脉的40Ar/39Ar年龄及其地质意义

用快中子活化法测定了安徽凤阳和张八岭地区朱顶、毛山和上成3个金矿床第一阶段晚期和第二阶段的含金石英脉,石英的阶段加热40Ar/39Ar坪年龄值域为(116.1±0.6～118.3±0.5)Ma,分别与其最小视年龄和等时线年龄接近.坪年龄、最小视年龄和等时线年龄3种年龄值域为(113.4±0.4～118.3±0.5)Ma,可以作为石英的形成年龄域. 根据含金石英脉和围岩的空间关系,该年龄值域作为石英脉金矿的形成年龄是合理可靠的.金矿床形成于早白垩世阿普特期,与此时郯庐断裂带略带右行走滑正断层活动一致.     

Impact of Southern Oscillation on the Frequency of Monsoon Depressions in the Bay of Bengal

The impact of Southern Oscillation on thecyclogenesis over the Bay of Bengal duringthe summer monsoon has been investigated.The analysis of correlation coefficients(CCs) between the frequency of monsoondepressions and the Southern OscillationIndex (SOI) reveals that more depressionsform during July and August of El Niñoyears. Due to this, the seasonal frequencyof monsoon depressions remains little higherduring El Niño epochs even though thecorrelations for June and September are notsignificant. The CCs for July and August aresignificant at the 99% level.The El Niño-Southern Oscillation (ENSO)is known to affect Indian MonsoonRainfall (IMR) adversely. The enhancedcyclogenesis over the Bay of Bengal duringJuly and August is an impact of ENSO whichneeds to be examined closely. Increasedcyclogenesis over the Bay of Bengal may bereducing the deficiency in IMR duringEl Niño years by producing more rainfallover the eastern parts of India duringJuly and August. Thus there is a considerablespatial variation in the impact of ENSOon the monsoon rainfall over India and El Niñoneed not necessarily imply a monsoonfailure everywhere in India.The area of formation of monsoon depressionsshifts eastward during El Niño years.Warmer sea surface temperature (SST) anomaliesprevail over northwest and adjoiningwestcentral Bay of Bengal during premonsoon andmonsoon seasons of El Niño years.May minus March SOI can provide useful predictionsof monsoon depression frequencyduring July and August.     

Identifying and quantifying urban recharge: a review

The sources of and pathways for groundwater recharge in urban areas are more numerous and complex than in rural environments. Buildings, roads, and other surface infrastructure combine with man-made drainage networks to change the pathways for precipitation. Some direct recharge is lost, but additional recharge can occur from storm drainage systems. Large amounts of water are imported into most cities for supply, distributed through underground pipes, and collected again in sewers or septic tanks. The leaks from these pipe networks often provide substantial recharge. Sources of recharge in urban areas are identified through piezometry, chemical signatures, and water balances. All three approaches have problems. Recharge is quantified either by individual components (direct recharge, water-mains leakage, septic tanks, etc.) or holistically. Working with individual components requires large amounts of data, much of which is uncertain and is likely to lead to large uncertainties in the final result. Recommended holistic approaches include the use of groundwater modelling and solute balances, where various types of data are integrated. Urban recharge remains an under-researched topic, with few high-quality case studies reported in the literature. Electronic Publication     

Rate of strike-slip motion on the Amanos Fault (Karasu Valley, southern Turkey) constrained by K–Ar dating and geochemical analysis of Quaternary basalts

The left-lateral Amanos Fault follows a 200-km-long and up to 2-km-high escarpment that bounds the eastern margin of the Amanos mountain range and the western margin of the Karasu Valley in southern Turkey, just east of the northeastern corner of the Mediterranean Sea. Regional kinematic models have reached diverse conclusions as to the role of this fault in accommodating relative motion between either the African and Arabian, Turkish and African, or Turkish and Arabian plates. Local studies have tried to estimate its slip rate by K–Ar dating Quaternary basalts that erupted within the Amanos Mountains, flowed across it into the Karasu Valley, and have since become offset. However, these studies have yielded a wide range of results, ranging from 0.3 to 15 mm a⁻¹, which do not allow the overall role and significance of this fault in accommodating crustal deformation to be determined. We have used the Cassignol K–Ar method to date nine Quaternary basalt samples from the vicinity of the southern part of the Amanos Fault. These basalts exhibit a diverse chemistry, which we interpret as a consequence varying degrees of partial melting of their source combined with variable crustal contamination. This dating allows us to constrain the Quaternary slip rate on the Amanos fault to 1.0 to 1.6 mm a⁻¹. The dramatic discrepancies between past estimates of this slip rate are partly due to technical difficulties in K–Ar dating of young basalts by isotope dilution. In addition, previous studies at the key locality of Hacılar have unwittingly dated different, chemically distinct, flow units of different ages that are juxtaposed. This low slip rate indicates that, at present, the Amanos Fault takes up a small proportion of the relative motion between the African and Arabian plates, which is transferred southward to the Dead Sea Fault Zone. It also provides strong evidence against the long-standing view that its slip continues offshore to the southwest along a hypothetical left-lateral fault zone located south of Cyprus.     

Denudation and cooling of the Lake Teletskoye Region in the Altai Mountains (South Siberia) as revealed by apatite fission-track thermochronology

Lake Teletskoye occupies a narrow graben located in the northwestern sector of the Altai fold belt in South Siberia. The lake basin is thought to have formed during the Pleistocene as a distant result of the Cenozoic collision of India and Eurasia that caused a tectonic reactivation of the Palaeozoic Gorny–Altai (GA) and West Sayan (WS) blocks.The present work reports of a pilot fission-track study performed on 13 apatite separates collected from rocks that were sampled along two profiles in close proximity of the lake. The age–length data and AFT thermochronological modelling reveal two important phases of cooling in the Altai Mountains, a first one during the Late Jurassic–Early Cretaceous and a second one that started in the Miocene–Pliocene and that persists until today. The first event is interpreted to result from uplift-induced denudation probably related to the closure of the Mongol–Okhotsk Ocean; the second event can be linked to the young Cenozoic movements that lie at the origin of the formation of the Lake Teletskoye basin.     

Intercomparison of IRS-P4-MSMR derived geophysical products with DMSP-SSM/I and TRMM-TMI finished products

In this paper, MSMR geophysical products like Integrated Water Vapour (IWV), Ocean Surface Wind Speed (OWS) and Cloud Liquid Water (CLW) in different grids of 50, 75 and 150 kms are compared with similar products available from other satellites like DMSP-SSM/I and TRMMTMI. MSMR derived IWV, OWS and CLW compare well with SSM/I and TMI finished products. Comparison of MSMR derived CLW with that derived from TMI and SSM/I is relatively in less agreement. This is possibly due to the use of 37 GHz in SSM/I and TMI that is highly sensitive to CLW, while 37 GHz channels are not available on MSMR. Monthly comparison of MSMR geophysical products with those from TMI is all carried out for climatological purpose. The monthly comparisons were much better compared to instantaneous comparisons. In this paper, details of the data analysis and comparison results are presented. The usefulness of the MSMR vis-à-vis other sensors is also discussed.     

δO of carbonate, quartz and phosphate from belemnite guards: implications for the isotopic record of old fossils and the isotopic composition of ancient seawater

Belemnite guards of Cretaceous and Jurassic age were found to contain varying amounts of quartz deposited both on the external surface and inside the rostrum. The oxygen isotopic composition of coexisting carbonate, quartz and phosphate from the same rostrum was measured according to well-established techniques. None of these compounds showed isotopic values in equilibrium with one another. Assuming δ¹⁸O values of the diagenetic water within the range of meteoric waters, the δ¹⁸O(SiO₂) yield temperatures in agreement with the apparent secondary origin of this phase. The δ¹⁸O(CO₃²⁻) range, with a certain continuity, between −10.8 and +0.97 PDB-1 with most of the intermediate values being within the range of the carbonate isotopic values of Mesozoic fossils. The most positive isotopic results obtained from phosphate are close to +23/+24‰ (V-SMOW). They can hardly be related to a secondary origin of the phosphate, or to the presence of diagenetic effects, since these results are among the most positive ever measured on phosphate. As far as we know there is no widespread diagenetic process determining an ¹⁸O enrichment of phosphate. The very low concentration of phosphate did not allow the determination of its mineralogical composition. All the available δ¹⁸O(PO₄³⁻) values from belemnite and non-belemnite fossils of marine origin of Tertiary and Mesozoic age are reported along with the newly measured belemnites. The following conclusions may be drawn from the data reported: (1) the pristine oxygen isotope composition of fossil marine organisms (either carbonate or phosphate) may easily undergo fairly large changes because of oxygen isotope exchange processes with diagenetic water; this process is apparent even in the case of geologically recent fossils; (2) the δ¹⁸O(PO₄³⁻) of belemnite rostra seems to be, at least in the case of the most positive results, in isotopic equilibrium with environmental water because of the similarity between the results from Cretaceous belemnites and the results from Cretaceous and Lower Tertiary pelecypods and fish teeth; 3) if so, the only feasible interpretation that can be suggested for the ¹⁸O enriched data is the possibility of a relatively large variation of the oxygen isotopic composition of ocean paleowater from Jurassic to recent time.     

Seismic evaluation of existing nuclear facility using ambient vibration test to characterize dynamic behavior of the structure and microtremor measurements to characterize the soil: a case study

The methods used for a building seismic hazard evaluation are presented with the associated results. The goals of the study are (1) to check the soil nature and the existence or not of a possible site effect around the installation and (2) to characterize the dynamic behavior of the building using ambient vibration records.

The results of the soil study with the Nakamura method are very difficult to interpret because they are not stable in space and time. The spectral ratios method has been used with regional earthquake records. The results of the application of this method allowed us to conclude that the installation was free of site effect.

The ambient vibration measurements on the building brought the conclusion to determine the first and second modes of the structure. These results have been used to calibrate numerical model. The modal shapes in plan (high roof) and in elevation (main column) have been evaluated. The damping of the building has been computed using ambient vibration records.