Design of a 3D Chirp Sub-bottom Imaging System

Chirp sub-bottom profilers are marine acoustic devices that use a known and repeatable source signature (1–24 kHz) to produce decimetre vertical resolution cross-sections of the sub-seabed. Here the design and development of the first true 3D Chirp system is described. When developing the design, critical factors that had to be considered included spatial aliasing, and precise positioning of sources and receivers. Full 3D numerical modelling of the combined source and receiver directivity was completed to determine optimal source and receiver geometries. The design incorporates four source transducers (1.5–13 kHz) that can be arranged into different configurations, including Maltese Cross, a square and two separated pairs. The receive array comprises 240 hydrophones in 60 groups whose group-centres are separated by 25 cm in both horizontal directions, with each hydrophone group containing four individual elements and a pre-amplifier. After careful consideration, it was concluded that the only way to determine with sufficient accuracy the source–receiver geometry, was to fix the sources and receivers within a rigid array. Positional information for the array is given by a Real Time Kinematic GPS and attitude system incorporating four antennas to give position, heading, pitch and roll. It is shown that this system offers vertical positioning accuracy with a root-mean-square (rms) error less than 2.6 cm, while the horizontal positioning rms error was less than 2.0 cm. The system is configured so that the Chirp source signature can be chosen by software aboard the acquisition vessel. The complete system is described and initial navigational and seismic data results are presented. These data demonstrate that the approach of using fixed source-receiver geometry combined with RTK navigation can provide complete 3D imaging of the sub-surface.     

Variability of organic δC and C/N in the Mersey Estuary, U.K. and its implications for sea-level reconstruction studies

Microfossil analysis (e.g. diatoms, foraminifera and pollen) represents the cornerstone of Holocene relative sea-level (RSL) reconstruction because their distribution in the contemporary inter-tidal zone is principally controlled by ground elevation within the tidal frame. A combination of poor microfossil preservation and a limited range in the sediment record may severely restrict the accuracy of resulting RSL reconstructions. Organic δ¹³C and C/N analysis of inter-tidal sediments have shown some potential as coastal palaeoenvironmental proxies. Here we assess their viability for reconstructing RSL change by examining patterns of organic δ¹³C and C/N values in a modern estuarine environment. δ¹³C and C/N analysis of bulk organic inter-tidal sediments and vegetation, as well as suspended and bedload organic sediments of the Mersey Estuary, U.K., demonstrate that the two main sources of organic carbon to surface saltmarsh sediments (terrestrial vegetation and tidal-derived particulate organic matter) have distinctive δ¹³C and C/N signatures. The resulting relationship between ground elevation within the tidal frame and surface sediment δ¹³C and C/N is unaffected by decompositional changes. The potential of this technique for RSL reconstruction is demonstrated by the analysis of part of an early Holocene sediment core from the Mersey Estuary. Organic δ¹³C and C/N analysis is less time consuming than microfossil analysis and is likely to provide continuous records of RSL change.     

添加纳米TiO2的氯醚树脂的XPS分析

在紫外线老化前后,利用光电子能谱(XPS)研究了分别添加金红石型和锐钛型纳米TiO2的氯醚树脂。研究发现,氯醚树脂中氯、氧元素具有表面富积现象——趋肤效应,而钛和碳元素在内层聚集;添加颜料粒子越小,在表面含量越大;金红石型纳米二氧化钛紫外屏蔽性好,减缓树脂老化;而锐钛型纳米二氧化钛具有显著的光催化活性,加速树脂老化。因此,金红石型纳米二氧化钛将是一种有前途的紫外线吸收剂。     

Comparison of two three-dimensional hydrodynamic modeling systems for coastal tidal motion

A comparison of two three-dimensional numerical modeling systems for tidal elevations and velocities in the coastal waters is presented. The two modeling systems are: (1) the Princeton Ocean Model (POM) and (2) the MIKE 3 flow model. The model performance results for Singapore's coastal waters show that the predicted tidal elevations from the two hydrodynamic modeling systems are almost identical and are in very good agreement with field measurement data. The simulated tidal current velocities match well with field measurement data at the selected stations, but it seems that the POM provides the slightly better simulation, compared to the MIKE 3 flow model. The depth profiles of the velocities obtained from the two modeling systems may be greatly different at some time, due to the vertical diffusion coefficient calculated from different turbulent sub-models in the two modeling systems. The POM generally predicts larger peak tidal velocities. The maximum speed differences for the model results from the two modeling systems occur in the top and differ from time to time and from location to location, reaching up to 20%.     

渤海区域地质信息管理系统数据库设计方案

数据库是GIS的基础。以渤海区域地质信息管理系统数据库为例，阐述了基于GIS的海洋地学管理信息系统中数据库的组织方法，及所包括空间数据库与属性数据库数据分类、分层方案，命名及编码规则，以及二者之间的联接。     

不同生长期坛紫菜多糖中组分含量的变化

于１９９０－１９９１年，运用＾１３Ｃ－ＮＭＲ和化学分析方法研究南方产和移植北方养殖的不同生长发育阶段坛紫菜多糖的组分变化，结果表明，随着藻体生长发育，坛紫菜琼胶中３，６－内醚－Ｌ－半乳糖和６－ＯＣＨ３－Ｄ－半乳糖的含量逐渐增加，而硫酸基的含量呈现先增加后减少的规律；北移坛紫菜琼胶中３，６－内醚－Ｌ－半乳糖的含量高于南方坛紫菜，而硫酸基和６－ＯＣＨ３－Ｄ－半乳糖的含量低于南方坛紫菜。     

南海陆坡天然气水合物成藏的构造环境

南海是西太平洋最大的边缘海之一，其复杂的构造演化，形成了构造特征迥异的南海陆缘，有利于天然气水合物的发育，南海地区在中中新统以上发育了上中新统，上新统和第四系3套地层，3套地层所对应的地质时期的沉降速率在纵横向上的差别均较为悬殊，总体而言，南海第四纪整体沉降速率较大，为天然气水合物压力场环境的形成提供了有利条件，南海复杂的构造背景形成了丰富多彩的构造地质体，特定的构造地质体与水合物形成关系密切，这里讨论了滑塌体、泥底辟、增生楔等构造地质体在南海的分布情况，分析了上述构造体与气体水合物地震标志BSR之间的关系，以及特殊构造带在南海的展布规律，提出了特殊的造带中天然气水合物的成藏模式。     

LAPP对中国对虾(Penaeus chinensis)生长、缺氧耐受力及免疫抵抗力的影响

实验研究维生素C多聚磷酸酯（LAPP）添加在对虾饲料中，对中国对虾的生长、缺氧耐受力及免疫抵抗力的影响；实验进一步证明了中国对虾饲料中LAPP的最适添加量为400mg／100g饲料;本文还提出饲料中的LAPP能够提高中国对虾的缺氧耐受力，在溶氧超过3．1mg／kg海水的情况下，效果显著，在降低到2．3mg／kg海水时，作用减弱；用副溶血弧菌（Vibroparahaemolyticus）注射入虾体内，12小时内记录发现，饲料中不含LAPP的一组中国对虾，死亡率高于其它组，并且，LAPP含量最高的一组，死亡率明显低，死亡时间也出现较晚，这证明LAPP能够提高中国对虾的免疫抵抗力；本实验用注射金黄色葡萄球菌后细胞的吞噬百分率作指标，研究对虾细胞的吞噬作用，发现饲料中不含LAPP的对虾的吞噬百分率较低，随着饲料中LAPP浓度的提高，对虾血细胞的吞噬百分率逐渐升高，说明中国对虾细胞的吞噬作用逐步增强。     

石鲽鱼人工育苗技术研究

根据石鲽鱼的生物学特性 ,对亲鱼的选择培育、人工催产、挤卵、受精孵化和仔稚鱼的培育技术 ,进行试验探索。在室内人工控制水温、光照、饵料投喂的条件下 ,较为系统地研究了石鲽鱼的发育和变态及其与理化因子的关系 ,探索了人工育苗的关键技术 ,突破了过去单纯依赖采捕自然苗进行人工养殖的方式 ,为实现室内全人工育苗及养成产业化生产 ,解决苗种来源途径提供了技术保证     

An experimental method for determining the frequency-dependent added mass and added mass moment of inertia for a floating body in heave and pitch motions

Most of the existing relevant materials have been obtained from experiments, in which evaluating the added mass at the resonant frequency corresponding to the peak of a frequency-response curve obtained from the “forced” vibration analysis is the most popular technique. In this paper, a simple experimental method was presented where the “free” vibration responses instead of the “forced” ones were used to determine the values of m_ah and I_ap. The main part of the experimental system is composed of a floating body (model) and a spring–shaft shaker. The “free” vibration of this main part was induced by imposing on it an initial displacement (and/or an initial velocity), and from the time histories of displacements information such as the “damped” natural frequencies, damping ratios, sectional added mass coefficients (C_V and C_P) were obtained. Since the displacements of the spring–shaft shaker are “translational” and those of the floating body due to pitch motions are “angular”, a technique for the transformation between the associated parameters of the two components of the main part was presented.