Development of a 3D GIS and its application to karst areas

There is a growing interest in modeling and analyzing karst phenomena in three dimensions. This paper integrates geology, groundwater hydrology, geographic information system (GIS), database management system (DBMS), visualization and data mining to study karst features in Huaibei, China. The 3D geo-objects retrieved from the karst area are analyzed and mapped into different abstract levels. The spatial relationships among the objects are constructed by a dual-linker. The shapes of the 3D objects and the topological models with attributes are stored and maintained in the DBMS. Spatial analysis was then used to integrate the data in the DBMS and the 3D model to form a virtual reality (VR) to provide analytical functions such as distribution analysis, correlation query, and probability assessment. The research successfully implements 3D modeling and analyses in the karst area, and meanwhile provides an efficient tool for government policy-makers to set out restrictions on water resource development in the area.     

The double solid reactant method: II. An application to the shallow groundwaters of the Porto Plain,Vulcano Island (Italy)

This paper presents an example of application of the double solid reactant method (DSRM) of Accornero and Marini (Environmental Geology, 2007a), an effective way for modeling the fate of several dissolved trace elements during water–rock interaction. The EQ3/6 software package was used for simulating the irreversible water–rock mass transfer accompanying the generation of the groundwaters of the Porto Plain shallow aquifer, starting from a degassed diluted crateric steam condensate. Reaction path modeling was performed in reaction progress mode and under closed-system conditions. The simulations assumed: (1) bulk dissolution (i.e., without any constraint on the kinetics of dissolution/precipitation reactions) of a single solid phase, a leucite-latitic glass, and (2) precipitation of amorphous silica, barite, alunite, jarosite, anhydrite, kaolinite, a solid mixture of smectites, fluorite, a solid mixture of hydroxides, illite-K, a solid mixture of saponites, a solid mixture of trigonal carbonates and a solid mixture of orthorhombic carbonates. Analytical concentrations of major chemical elements and several trace elements (Cr, Mn, Fe, Ni, Cu, Zn, As, Sr and Ba) in groundwaters were satisfactorily reproduced. In addition to these simulations, similar runs for a rhyolite, a latite and a trachyte permitted to calculate major oxide contents for the authigenic paragenesis which are comparable, to a first approximation, with the corresponding data measured for local altered rocks belonging to the silicic, advanced argillic and intermediate argillic alteration facies. The important role played by both the solid mixture of trigonal carbonates as sequestrator of Mn, Zn, Cu and Ni and the solid mixture of orthorhombic carbonates as scavenger of Sr and Ba is emphasized.

Groundwater recharge of carbonate aquifers of the Silesian-Cracow Triassic (southern Poland) under human impact

A Triassic carbonate unit has been intensively drained by zinc and lead ore mines and numerous borehole fields since the nineteenth century. Its groundwater recharge has increased due to: pumping of water from boreholes, mining activity, and urbanization. An approach to determine the amounts of the recharge at a variety of spatial scales is presented in the paper. Different methods were used to identify and quantify recharge components on a regional and local scale: mathematical modelling was performed for four aquifers included in an aquifer system, an analytical estimation based on the assumption that an average recharge is equal to the average discharge of the hydrogeological system—for six man-made drainage centres, and the method of water level fluctuation (WLF) was applied in one observation borehole. Results of modelling have been supplemented by observation of environmental tracers (δ¹⁸O, δ²H, ³H), noble gases temperatures, and ⁴He_exc in groundwater. The regional aquifer’s current recharge according to estimations performed by means of modelling varies from 39 to 101 mm/year on average. Depending on the aquifer site the average precipitation ranges from 779 to 864 mm/year. In the confined part of the aquifer average recharge ranges from 26 to 61 mm/year. Within outcrops average recharge varies from 96 to 370 mm/year. Current recharge estimated by the analytical method for man-made drainage centres varies from 158 up to 440 mm/year. High values are caused by different recharge sources like precipitation, induced leakage from shallow aquifers, and water losses from streams, water mains and sewer systems. Pumping of water, mining and municipal activities constitute additional factors accounting for the intensified recharge.     

Greening as strategic development in industrial change - Why companies participate in eco-networks

Networking between companies and other regional key actors has grown into a widespread instrument for economic development since the 1990s. Participatory networks have formed the concept for many activities of Local Agenda 21. Simultaneously, economic geography has focused on network theories to explain innovation in and the economic success of regions.This article focuses on the reasons why individual actors participate in environmentally oriented information networks. The questions approached are: Does the concept of learning within networks influence a firm’s development? How do the participants interact with each other? What effects do the networks have on their environment (arenas)?The changing arenas of a firm are analysed with regard to environmental concerns. These changes need to be anticipated for reliable strategies. To gain information and knowledge about current behaviour and activities, the functions of networks as learning platforms are discussed. Drawing upon arguments from different network theories, the motivations of participating in a network are threefold: actor and firm oriented, network internal (inter-firm), and network external. From these, a generic target cube of network motivations and actions is set up.The concept is reviewed by examining 12 ‘regional environmental information-oriented corporation networks’ (RUN) in the Greater Munich Area. The empirical material reveals that this type of network does not provide a guarantee for significant improvements in a firm’s environmental behaviour. However, participants learn about best practices while pursuing explicit or implicit aims as to influence their arenas.     

EPR investigation of the methyl radical,the hydrogen atom and carbon oxide radicals in Maxixe-type beryl

The EPR spectra of Maxixe-type beryl contain a large number of overlapping signals. The angular dependence of the 1:3:3:1 signal typical for the CH₃ radical shows that this radical is located at the center of the channel cavity with its symmetry axis parallel to the crystal c-axis and is rotating around this axis. Its EPR spectrum is axially symmetric with g _// = 2.00263, g _⊥ = 2.00249 and A_// = 2.288 mT, A_⊥ = 2.256 mT. These anisotropies have the opposite signs of those found for surface-adsorbed methyl radicals. Hydrogen atoms are located at position 2a at the center of the beryl cavity and the EPR parameters of the narrow doublet signal are A ₀ = 1,407 MHz and g = 2.00230. Another doublet signal, which is broader and has axial symmetry with g _// = 2.00265, g _⊥ = 2.00625 and A_// = 0.895 mT, A_⊥ = 0.885 mT, could come from a HCO₃ radical. One narrow and easily saturated signal with g _// = 2.00227 and g _⊥ = 2.00386 is interpreted to arise from a carbon monoxide radical in the beryl channel, oriented with its axis parallel to the crystal c-axis. Additional weak doublet lines, which have similar g values as the carbon monoxide radical, are created by nearby hydrogens. A powder spectrum with g _// = 2.0017 and g _⊥ = 2.0004 appears upon UV irradiation of the single crystal and is easily saturated. This spectrum is interpreted to arise from a carbon dioxide radical, which rotates around its symmetry axis.     

Peace Parks and jaguar trails: transboundary conservation in a globalizing world

An increasingly utilized strategy for expanding conservation in the developing world has been the promotion of protected areas that supersede national borders. Alternatively known as transfrontier biosphere reserves, transfrontier or transboundary conservation areas, or Peace Parks, these protected areas are aggressively advanced by conservation agencies for their purported ecological and economic benefits. This article provides a comparative assessment of two case studies to understand the various impacts of transboundary conservation. The Great Limpopo Transfrontier Park, which unites protected areas in South Africa, Mozambique and Zimbabwe, is contrasted with efforts to protect jaguars along the United States–Mexico border. We argue that while these cases are promising for the purposes of biodiversity protection, they demonstrate that transboundary conservation can minimize political context, contributes to the hegemony of international conservation agendas, and remains closely linked to economic neoliberalism and decentralization in the developing world.

The spatial implications of the functional proximity deriving from air passenger flows between European metropolitan urban regions

Until recently the traditional spatial configuration of the European geography was based upon the core-periphery model. The ‘pentagon’, broadly defined as lying between London, Paris, Milan, Munich and Hamburg, was seen as the core area characterised by having the highest concentration of economic development in the European Union (EU), with the remainder of the European territory viewed as peripheral, albeit to varying degrees. In a number of cases such peripheral areas equated with clear regional disparities. The elaboration of the European Spatial Development Perspective (ESDP) (CEC, European spatial development perspective, towards balanced and sustainable development in the territory of the European Union, 1999) challenged this core-periphery model. European spatial planning policies, aimed at encouraging social and economic, and with ever increasing importance, territorial cohesion, seek amongst other aspects to encourage the development of a balanced and polycentric urban system. This paper adopts a network analysis approach to the analysis of air passenger flows between some 28 principal European metropolitan urban regions. The evaluation of these flows contributes to an enhanced comprehension of the spatial dynamics of the European metropolitan territory which goes beyond that deriving from the more standard analyses of the individual components of the urban system. Several indicators are used, deriving from gravitational modelling techniques, to analyse the complexity of the air passenger flows. A multidimensional scaling (MDS) technique is introduced in order to interpret and visualise the resulting spatial configuration and positioning of the different metropolitan centres within the conceptual European ‘space of air passenger flows’, thereby contrasting with the more traditional map-based geographical image of Europe, based upon Cartesian coordinates.

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran     

滑坡体三维地质建模与可视化分析

针对滑坡地质研究的自身特点,提出了面向滑坡地质体三维建模的NURBS-BRep混合数据结构和地质结构单元实体构造技术.通过对滑坡基础地质数据的预处理、滑坡数字地形和滑动面的三维建模、地质结构面的系统构造、地质结构体的生成和显示,形成了一套完整的滑坡三维地质模型的构建方法.将该方法应用于某水库滑坡,建立了相应的三维滑坡地质模型,并基于此模型进行了三维剖切分析、数字钻孔、等值线生成、滑块自动剖分、滑坡失稳可视化动态模拟和滑坡体方量精确计算等一系列实用的可视化分析,为滑坡稳定性的准确计算和客观评价提供了有力的支持.