Morphology,sedimentary infill and depositional environments of the Early Quaternary North Sea Basin (56°–62°N)

The North Sea Basin has been subsiding during the Quaternary and contains hundreds of metres of fill. Seismic surveys (170 000 km²) provide new evidence on Early Quaternary sedimentation, from about 2.75 Ma to around the Brunhes-Matuyama boundary (0.78 Ma). We present an informal seismic stratigraphy for the Early Quaternary of the North Sea, and calculate sediment volumes for major units. Early Quaternary sediment thickness is > 1000 m in the northern basin and >700 m in the central basin (total about 40 000 km³). Northern North Sea basin-fill comprises several clinoform units, prograding westward over 60 000 km². Architecture of the central basin also comprises clinoforms, building from the southeast. To the west, an acoustically layered and mounded unit (Unit Z) was deposited. Remaining accommodation space was filled with fine-grained sediments of two Central Basin units. Above these units, an Upper Regional Unconformity-equivalent (URU) records a conformable surface with flat-lying units that indicate stronger direct glacial influence than on the sediments below. On the North Sea Plateau north of 59°N, the Upper Regional Unconformity (URU) is defined by a shift from westward to eastward dipping seismic reflectors, recording a major change in sedimentation, with the Shetland Platform becoming a significant source. A model of Early Quaternary sediment delivery to the North Sea shows sources from the Scandinavian ice sheet and major European rivers. Clinoforms prograding west in the northern North Sea Basin, representing glacigenic debris flows, indicate an ice sheet on the western Scandinavian margin. In the central basin, sediments are generally fine-grained, suggesting a distal fluvial or glacifluvial origin from European rivers. Ploughmarks also demonstrate that icebergs, derived from an ice sheet to the north, drifted into the central North Sea Basin. By contrast, sediments and glacial landforms above the URU provide evidence for the later presence of a grounded ice sheet.     

海底三维声学图像实时处理系统设计

结合多核CPU硬件PC平台,设计了一种海底三维声学图像实时处理系统,主要包括声学前端信号处理子系统、数据传输控制子系统和PC客户端图像处理系统三个部分。声学前端信号处理子系统统根据接收到的多路声学换能器信号,通过两级FPGA信号处理,采集多通道水声信号,进行实时电子聚焦波束形成。为了解决海量声学数据快速传输问题,数据传输控制子系统未采用传统用户空间TCP/IP传输机制,而是直接通过嵌入式PowerPC处理器在Linux内核态采用DMA通道进行声学数据转发,减少系统调用和数据拷贝开销,有效提高网络传输效率。针对海量声学数据实时处理需求,PC客户端图像处理系统通过对复杂、耗时的单帧重建和数据拼接算法模块根据声学数据点的角度范围进行等分分割,对每个子范围声纳数据采用多线程并行处理,均衡多个CPU核之间负载,实现高性能三维声学图像实时处理。通过室内水池和湖试实验,结果表明该系统能够实时高效地进行三维声学图像采集、传输与处理。     

Trophic ecology of Pomatoschistus microps within an intertidal bay (Roscoff,France), investigated through gut content and stable isotope analyses

The diet of Pomatoschistus microps has been studied using both gut content and stable isotope analyses. In the Roscoff Aber Bay (Brittany, France), this fish is commonly found on sandy muddy intertidal flats. Gut content analyses were also interpreted using trophic indices. Owing to the large diversity of prey consumed, these indices emphasised the opportunistic feeding behaviour of P. microps. Here, this species fed mainly on endofauna with meiofauna being of high relative importance. The main biotic components of its trophic habitat, characterized by δ¹³C and δ¹⁵N, provided evidence of a major trophic pathway based on drift Enteromorpha sp. Trophic positions estimated by both diet analyses and isotopic analyses led to similar results. In this bay, P. microps is a first‐order predator with a low degree of omnivory. Despite a preferential consumption of the amphipod Corophium arenarium, we assumed that this goby behaves as a generalist feeding on a uniform variety of endofauna taxa.     

A comparison of economic performance in the fisheries sector: A short- and long-term perspective

Indicators of the economic performance of fishing vessels are frequently computed in various countries. In this paper, we use different types of information to assess capital value and the economic performance of fishing vessels. On the one hand, field surveys provide technical and financial information on the main components of fishing capital. On the other hand, book values are given in bookkeeping databases. We use both sources of information on fishing capital are used for the same set of vessels, namely the commercial fishing fleet of the French region of Brittany. Based on these two sources, measures of economic performance can be produced for the short term using gross surplus; and for the long term including the cost of capital. The measures of performance obtained are presented and the differences between them are then discussed.     

锦州9-3油田海域环境现状及其评价

1 引言 石油,作为现代社会的主要能源,在全球经济迅速发展和人口激增的情况下,世界范围内的供求在不断增长,海洋石油勘探开发规模也在不断扩大.海洋油气开发已成为我国油气战略资源的主要来源之一.     

基于数字全息显微的海洋浮游生物三维形貌快速重建方法研究

针对海洋浮游生物实时探测中,三维形貌特征难以快速获取的问题,本文提出了一种海洋浮游生物三维形貌快速重建的方法。基于离轴菲涅尔数字全息显微系统,通过改进相位恢复方法预消除相位畸变,直接得到正确的相位信息,进而对浮游生物三维形貌重建。该方法不需要进行后期复杂的相位补偿计算,就可以对浮游生物三维形貌进行快速重建,有利于对动态、微小尺寸的浮游生物进行实时探测及分析。论文对青岛近海岸浮游生物桡足类和夜光虫进行了三维形貌重建,分辨率可达到3.5μm。实验结果为离轴菲涅尔数字全息显微系统用于海洋浮游生物原位、实时探测的可行性提供了依据。     

Characterization of tar-like material and producible oil in Misoa C2 and C3 reservoir sands of the Area 2 South (Ceuta Field,Venezuela)

Here we characterized asphaltic oil occurrences in the Misoa C2 and C3 reservoirs within Area 2 South of the Ceuta Field (Lake Maracaibo Basin, NW Venezuela). To perform the geochemical and petrological characterization of the C2 and C3 sub-units, which cover an interval in which tar-like material was detected, we analyzed core (18) and cutting (123) samples using the Rock-Eval 6 technique in reservoir mode. Samples were studied under fluorescence light and scanning electron microscopy (SEM), showing the presence of two charges of oils and the relationships within silica cements and clay minerals. To evaluate vertical inter-reservoir communication and lateral intra-reservoir continuity, we also studied 12 oil samples from wells in Area 2 South. Biomarkers and isotopic signatures were examined using gas chromatography-mass spectrometry (GC-MS) and isotope ratio mass spectrometry (IRMS). The results suggest that oil and core extracts belongs to a single family derived from two pulses of hydrocarbon generation from the La Luna source rock, which was deposited in a marine reducing environment. The oil samples are a mixture of a paleobiodegraded oil charge and a later fresh, more mature oil recharge. The geochemical analyses also evidence that the formation of heavy oil tar zones can be related to biodegradation and in-reservoir oil mixing, though other formation mechanisms for the tar are also feasible. Finally, the GC fingerprints of the oils are indicative of lateral reservoir continuities across the F-1 and F-2 faults and vertical communication between the Misoa C2 and C3 sub-units in Area 2 South, suggesting that tar occurrences do not act as permeability barriers within the two reservoirs studied.     

极区冰基拖曳式海洋剖面浮标系统低功耗设计与实现

针对极区冰基拖曳式海洋剖面浮标长期稳定获取极区水文和气象数据的工作需求,进行了浮标系统的低功耗方案设计。该方案基于超低功耗51系列微处理器,根据最低功耗工作模式与最短工作时间原则,采用高效的电源管理机制对浮标系统各个部分的能量消耗进行合理的分配与管理,并应用了Argos卫星通讯模块ARGOS-3 PMT-RFM的BPSK调制低速数据传输模式,可有效降低浮标系统的整体能耗。该浮标在北极冰站上长达1年的运行情况表明该系统工作稳定,所采用的低功耗能量管理方案实现了浮标系统长期连续观测的需求。该浮标的成功试验和推广应用有助于极地研究人员更准确地分析海冰变化过程。     

Effect of different registration methods on precision of orientation based on RTK registration/georeferencing mode

Abstract

Compared with traditional methods, the three-dimensional laser-scanning (3D-LS) technique can efficiently acquire many high-quality geometric properties of rock discontinuities. In practice, engineers usually prefer to simplify the processing by using single-station point data and roughly orienting owing to the complexity of registration/georeferencing multi-station point data. However, prior published studies have paid little attention to the accuracy and reliability when determining discontinuity orientations using 3D-LS. We propose a reliable and accurate method with robust on-site applicability. As part of an ongoing effort, we are evaluating the precision of the commonly used coarse registration method and the fine registration method, and promoted the optimized coarse- and fine-registration methods and evaluated their precision. It is found that: (1) the common and the optimized registration method can meet our project’s engineering requirements, and the optimized registration method improved accuracy in the dip direction by approximately 1°; (2) fine registration using an iterative closest point (ICP) algorithm can correct both dip direction and dip angle; and (3) the orientation is of high precision with commonly used coarse and fine registration, whereas the optimization effect to correct the orientation is slightly limited.