Evaluation of three waterborne polymers as stabilizers for sandy soil

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.     

Influence of Adoptment of Geocentric 3D Coordinate System on Chinese Existent Maps

If a geocentric 3D coordinate system is adopted in China to replace 2D non-geocentric coordinate system, the coordinates of the surface points will be changed accordingly. The influences on the current maps of China, especially the topographic maps, are discussed due to the replacement of the coordinate systems. Taking the replacement of Xi‘an 80 coordinate system by GRS80 for a numerical example, this paper analyzes the changes of latitude, longitude, Gauss plane coordinates of the surface points, as well as the orientation and the length changes between the points on the map, including the changes of map border lines and sheet corner points.     

二维电子地图和三维虚拟场景的互响应

本文提出了基于二维电子地图与三维虚拟场景之间相互响应的思想来克服它们各自的局限性.简要的描述了相互响应的原理、表现形式、实现流程及实现方法.最后提出了一些结论和展望.     

基于IMAGIS的数字小区建模探讨

随着城市化水平的不断提高，对城市的规划管理也提出了很高的要求，数字城市作为数字地球的重要组成部分正是在这一背景下提出的。本文结合适普公司的IMAGIS软件，对城市小区鼍维场景建设中的相关问题进行了探讨，并以遂宁市某街区为例进行了实践。     

黑龙江省中部森林沼泽区 超低密度深穿透地球化学调查采样介质的确定

通过对王水溶矿法与四酸溶矿法的对比,元素在泛滥平原A层、B层沉积物及水系沉积物中的分配,以及这3种介质圈定的异常对比等综合因素的研究,确定了泛滥平原A层沉积物是黑龙江省中部森林沼泽区开展超低密度深穿透地球化学调查的有效采样介质。     

基于体素模型的三维显示技术

针对矿产资源勘探数据的特点,研究了适合地质体信息三维可视化的体绘制模型和空间插值算法。基于IDL软件平台,开发了三维数据可视化软件;该软件能够快速、准确地将地质体的物性特征展示出来。最后,以内蒙古某金属矿床钻孔资料为例,对建立的三维可视化方法技术进行了应用检验,取得了较好的应用效果。     

利用Java-X3D实现地震层位三维可视化

地震层位三维可视化可以提供形象化的地震层位三维特征,便于地震资料的后期解释.在叙述地震层位三维可视化技术原理、目标、方法的基础上,尝试利用Java-X3D技术实现地震层位三维可视化,并利用实际坐标数据,实现了在Internet上跨平台的地震层位及地质构造三维可视化模拟,取得了良好的效果.     

ODP204航次天然气水合物的可能有利储层——浊积层

为了解岩性在天然气水合物分布中的作用, 利用岩矿鉴定、扫描电镜和能谱法对ODP204航次的 4个站位 10个钻孔共计 115个沉积物样品进行分析, 发现沉积物中矿物成分基本相近, 以粘土矿物为主, 含少量以石英为主的陆源碎屑。样品中含有丰富的硅藻和有孔虫等微体化石, 可形成硅藻粘土—硅藻土、有孔虫硅藻土或凝灰质硅质生物粘土。石英碎屑大多呈棱角状, 粒径小、含量少, 同时, 样品中可见透镜体、团块或旋涡状层状结构以及杂乱堆积的斑杂构造。上述特征表明沉积物为含有大量深海或半深海的浊流沉积物或其夹层。由于钻井岩心中有相当部分的天然气水合物样品分布在上述沉积物中, 推断这些浊流沉积物很可能是ODP204航次天然气水合物的有利储层。     

C1相干算法及其在三维地震资料处理解释中的应用

C1相干算法是计算每道的横测线和相邻纵测线的互相关，依据相干值来判断地层和岩性的横向不均匀性。根据互相关原理，提出了相干体算法中二维和三维C1算法的内容及其具体实现。通过对实际三维地震资料的处理，结合已知地质资料，证明C1相干技术在三维地震资料的断层解释方面有着明显的效果。     

禹州煤田泉店井田构造特征及对其二1煤层的影响

对泉店井田的地质构造进行了分析研究,阐明了断层及褶曲的分布,探讨了井田的构造演化,分析了构造特别是断层对二1煤层的影响,为今后煤矿开发生产提供了可靠的地质依据.