The response of an elastic half‐space under a momentary shear line impulse

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.     

Virtual Huanghe River System： Framework and Technology

1 Introduction Huanghe (Yellow) River basin is located in 32°–42°N, 96°–119°E. The area of the catchment is more than 752,000km2. The river is 5464km long with a drop in elevation of 4830m. Among the whole area, the moun- tainous and stone area accounts for 29%, loess and hills area 46%, sandy area 11% and plain area 14%, respec- tively. Different natural landscapes exist in this area. The Huanghe River flows through the Loess Plateau, where the soil is eroded seriously (Wang, 2002;…     

Optical monitoring of the quasar 4C 38.41

The results of a photometric monitoring of the quasar 4C 38.41, performed at the optical R and B bands in 2002 February–March, are presented. With a 60/90 cm Schmidt telescope at the Xinglong station of the National Astronomical Observatories of China, we observed the source exhibiting amplitude variations of up to 0.78 mag in both bands during the whole campaign. Intraday and even intranight variations are detected as well. A typical variability time-scale of about 36 d is derived from our 2-month observations at the optical bands, which is identical to that found at a radio wavelength of 92 cm, suggesting a common origin for the variations in 4C 38.41 from optical to radio bands.     

Application of Grain Size Analysis to Study Sedimentary Environment of Sand Dune in the Vicinity of Tumen River

The dunes in estuary of Tumen River in China lie to the area between the Jiushaping and Fangchuan in the left bank of Tumen River (Fig.1). The dis-tance is about 15～20 km between the dunes and the coast. It ranges from China to D. P. R. Korea and Russia. The range of the height of dunes is about 15～20 m and the width is 100～200 m. By the re-connaissance, we protracted 9 section planes of the dunes and collected 40 sand samples of the dunes, and identified the sedimentary environment …     

DISASTER ANALYSIS AND COUNTERMEASURES OF LAND SUBSIDENCE CAUSED BY COAL CUTTING IN CHINA

In recent years, many coal-producing countries have paid great attention to the land subsidence causedby coal cutting. In China, because of the dense population in coalfield areas, the land subsidence hazard is more seri-ous. After a brief analysis on the mechanism of land subsidence, this paper gives a comprehensive and systematical ac-count on all kinds of hazards caused by the land subsidence in China. The study shows that land subsidence has endan-gered land, buildings, traffic and communication lines, dykes and dams. It also causes damage to ecological and socialenvironment. In order to lessen the hazard of land subsidence, preventive measures should be taken to reduce the col-lapse amount, such as extraction with stowing, banded mining system, succession and coordination mining system, orhigh-pressure mudflow between rock strata. Measures of reinforcing or moving certain buildings should also be taken toreduce the destructive degree. In order to harness the subsidence land and bring them under control for fanning, mea-sures should be taken such as filling with spoil or fine breeze, excavating the deeper and covering the shallower land.     

疏散星团的最新研究进展

疏散星团在天文学和天体物理学研究中有着多方面的重要性。近年来在观测和理论工作上都取得了显著的进展。综述了疏散星团的研究现状，对成员判别、基本参数确定、团与恒星的演化、团的结构和动力学进行了详细评述。     

Principal components in active galactic nuclei variability data and the estimation of the flux contributions from different components

It has been found that the near-infrared flux variations of Seyfert galaxies satisfy relations of the form   F_i ≈α _{i j} +β _{i j} F_j   , where F_i , F_j are the fluxes in filters i and j ; and  α _{i , j} , β _{i , j}   are constants. These relations have been used to estimate the constant contributions of the non-variable underlying galaxies. The paper attempts a formal treatment of the estimation procedure, allowing for the possible presence of a third component, namely non-variable hot dust. In an analysis of a sample of 38 Seyfert galaxies, inclusion of the hot dust component improves the model fit in approximately half the cases. All derived dust temperatures are below 300 K, in the range 540–860 K or above 1300 K. A noteworthy feature is the estimation of confidence intervals for the component contributions: this is achieved by bootstrapping. It is also pointed out that the model implies that such data could be fruitfully analysed in terms of principal components.     

Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

X-ray synchrotron emission from the oblique shock in the jet of the powerful radio galaxy 3C 346

We report the first detection, with Chandra , of X-ray emission from the jet of the powerful narrow-line radio galaxy 3C 346. X-rays are detected from the bright radio and optical knot at which the jet apparently bends by approximately 70°. The Chandra observation also reveals a bright galaxy-scale atmosphere within the previously known cluster and provides a good X-ray spectrum for the bright core of 3C 346. The X-ray emission from the knot is synchrotron radiation, as seen in lower-power sources. In common with these sources, there is evidence of morphological differences between the radio/optical and X-ray structures, and the spectrum is inconsistent with a one-component continuous-injection model. We suggest that the X-ray-bright knot is associated with a strong oblique shock in a moderately relativistic, light jet, at ∼ 20° to the line of sight, and that this shock is caused by the jet interacting with the wake in the cluster medium behind the companion galaxy of 3C 346. The general jet curvature can result from pressure gradients in the cluster atmosphere.