粉煤灰基地质聚合物水热原位转化NaP型沸石分子筛的研究

以固体废弃物粉煤灰基地质聚合物为基本骨架,通过水热合成法将其原位转化为自支撑Na P型沸石分子筛型体,并研究了水热过程中碱液浓度、碱液体积、水热温度和水热时间对NaP型沸石分子筛结晶程度、形貌和机械强度的影响,得到粉煤灰基地质聚合物原位转化Na P型沸石分子筛型体的适宜条件为水热温度100℃、NaOH浓度2.0mol/L、NaOH体积50 m L、水热时间24 h。所得Na P型沸石分子筛型体的抗压强度为23.21 MPa,BET比表面积为50.46 m~2/g,已达到工业生产P型沸石的水平。该法工艺简单,环境友好,可控成型。在此方法的基础上通过改变原料配比和反应条件,可以合成其他类型的沸石分子筛型体。     

油铀兼探的找矿思路在松辽盆地的应用——以中央拗陷区南部为例

以"油铀兼探"的找矿思路,带动松辽盆地中南部开展砂岩型铀矿调查选区及钻探验证工作.将异常强度250 API和450 API确定为划分潜在铀矿孔、潜在铀矿化孔和正常孔的关键技术指标,对中央拗陷区南部1572个钻孔进行异常筛查工作.排查发现潜在铀矿孔362个,潜在铀矿化孔223个.对191号钻孔和36号钻孔进行钻探验证,发现1个工业孔、1个异常孔.认为区内寻找砂岩型铀矿的有利地段为油田区反转构造形成的隆起区边部四方台组河流相砂体,并总结了中央拗陷区南部6种主要控矿因素.     

地物化方法在航磁异常查证中的应用

航磁异常查证是矿产勘查中的一个重要环节,其目的是通过地面查证,确定异常是否存在,追踪异常源,了解异常源所处的地质环境,对异常作出客观评价,提出进一步工作的建议,为后续资料解释提供依据.通过使用地物化综合方法对黑C-2011-02243号异常查证发现：地质剖面测量和土壤地球化学测量可在地表发现较好的找矿线索;高精度磁测及激电中梯测量则反映了深部地质体及矿化特征.依据查证结果认为,在进行航磁异常查证工作时,可优先进行剖面性的地质、高精度磁法及土壤地球化学测量工作;在分析上述测量结果的基础上安排剖面性的电法测量;如存在进一步找矿信息,可安排面积性物化探测量及工程验证工作.     

三江盆地前进坳陷油气地质调查新进展

随着东北大型含油气沉积盆地油气勘探难度越来越大,老油田开发程度已进入中后期,亟需新的油气区接替。三江盆地作为松辽盆地外围7个一级远景盆地之一,具有较大的油气勘探潜力。最近在三江盆地前进坳陷开展了一系列油气地质调查工作,在中生界泥页岩、晚古生界暗色泥岩地层及硅质岩生烃潜力方面取得了新的进展与认识,对评价该区油气资源潜力、进行下一步油气勘探工作具有重要意义。     

发射光谱法测定区域化探样品中的Pb、Sn、Mo、V元素

采用发射光谱法测定区域化探样品中Pb、Sn、Mo、V元素,以焦硫酸钾、氟化钠、三氧化二铝和碳粉的混合物为固体缓冲剂,采用外加内标法以锗（Ge）作为内标元素,选择合适的分析线对,选取国家一级地球化学标准物质（GBW水系沉积物、土壤）平行测定（n=12次）.测试结果准确度达到规范要求,满足区域化探样品的检测要求.     

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.     

Ore-bearing fluids of the Eldorado gold deposit (Yenisei Ridge,Russia)

The Eldorado low-sulfide gold-quartz deposit, with gold reserves of more than 60 tons, is located in the damage zone of the Ishimba Fault in the Yenisei Ridge and is hosted by Riphean epidote-amphibolite metamorphic rocks (Sukhoi Pit Group). Orebodies occur in four roughly parallel heavily fractured zones where rocks were subject to metamorphism under stress and heat impacts. They consist of sulfide-bearing schists with veins of gray or milky-white quartz varieties. Gray quartz predominating in gold-bearing orebodies contains graphite and amorphous carbon identified by Raman spectroscopy; the contents of gold and amorphous carbon are in positive correlation. As inferred from thermobarometry, gas chromatography, gas chromatography-mass spectrometry, and Raman spectroscopy of fluid inclusions in sulfides, carbonates, and gray and white quartz, gold mineralization formed under the effect of reduced H₂O-CO₂-HC fluids with temperatures of 180 to 490 °C, salinity of 9 to 22 wt.% NaCl equiv, and pressures of 0.1 to 2.3 kbar. Judging by the presence of 11% mantle helium (³He) in fluid inclusions from quartz and the sulfur isotope composition (7.1-17.4‰ δ³⁴S) of sulfides, ore-bearing fluids ascended from a mantle source along shear zones, where they “boiled”. While the fluids were ascending, the metalliferous S- and N-bearing hydrocarbon (HC) compounds they carried broke down to produce crystalline sulfides, gold, and disseminated graphite and amorphous carbon (the latter imparts the gray color to quartz). Barren veins of milky-white quartz formed from oxidized mainly aqueous fluids with a salinity of < 15 wt.% NaCl equiv at 150-350 °C. Chloride brines (> 30 wt.% NaCl equiv) at 150-260 °C impregnated the gold-bearing quartz veins and produced the lower strata of the hydrothermal-granitoid section. The gold mineralization (795-710 Ma) was roughly coeval to local high-temperature stress metamorphism (836-745 Ma) and intrusion of the Kalama multiphase complex (880-752 Ma).     

Defining the Potential of Nanoscale Re‐Os Isotope Systematics Using Atom Probe Microscopy

Atom probe microscopy (APM) is a relatively new in situ tool for measuring isotope fractions from nanoscale volumes (< 0.01 μm³). We calculate the theoretical detectable difference of an isotope ratio measurement result from APM using counting statistics of a hypothetical data set to be ± 4δ or 0.4% (2s). However, challenges associated with APM measurements (e.g., peak ranging, hydride formation and isobaric interferences), result in larger uncertainties if not properly accounted for. We evaluate these factors for Re‐Os isotope ratio measurements by comparing APM and negative thermal ionisation mass spectrometry (N‐TIMS) measurement results of pure Os, pure Re, and two synthetic Re‐Os‐bearing alloys from Schwander et al. (2015, Meteoritics and Planetary Science, 50, 893) [the original metal alloy (HSE) and alloys produced by heating HSE within silicate liquid (SYN)]. From this, we propose a current best practice for APM Re‐Os isotope ratio measurements. Using this refined approach, mean APM and N‐TIMS ¹⁸⁷Os/¹⁸⁹Os measurement results agree within 0.05% and 2s (pure Os), 0.6–2% and 2s (SYN) and 5–10% (HSE). The good agreement of N‐TIMS and APM ¹⁸⁷Os/¹⁸⁹Os measurements confirms that APM can extract robust isotope ratios. Therefore, this approach permits nanoscale isotope measurements of Os‐bearing alloys using the Re‐Os geochronometer that could not be measured by conventional measurement principles.     

Effect of 2D spatial variability on slope reliability: A simplified FORM analysis

To meet the high demand for reliability based design of slopes, we present in this paper a simplified HLRF(Hasofere Linde Rackwitze Fiessler) iterative algorithm for first-order reliability method(FORM). It is simply formulated in x-space and requires neither transformation of correlated random variables nor optimization tools. The solution can be easily improved by iteratively adjusting the step length. The algorithm is particularly useful to practicing engineers for geotechnical reliability analysis where standalone(deterministic) numerical packages are used. Based on the proposed algorithm and through direct perturbation analysis of random variables, we conducted a case study of earth slope reliability with complete consideration of soil uncertainty and spatial variability.     

庐枞火山岩盆地南部拔茅山铜矿深部找矿潜力分析

位于庐枞火山岩盆地南部的拔茅山铜矿,是细脉带蚀变岩型脉状铜矿的代表。研究表明,其深部具有斑岩型铜矿的勘探潜力。为了进一步明确其深部找矿潜力,针对研究区斑岩型、热液型铜多金属矿的岩体、断裂、接触带等主要控矿因素,利用高精度磁法和可控源音频大地电磁测深(CSAMT)成果,分别对拔茅山岩体的分布、产状和深部形态及其与围岩的接触带特征进行了剖析。在此基础上,通过与沙溪斑岩铜矿地质、物探异常特征的类比,指明了研究区的找矿方向和有利找矿部位,为进一步找矿提供了思路和依据。