Laboratory Simulation of the Formation Process of Surface Geochemical Anomalies Applied to Hydrocarbon Exploration

The formation mechanisms and processes of geochemical anomalies used as proxies in surface geochemistry exploration (SGE) have not been well understood. Previous studies cannot realize 3D measurement of microseeping hydrocarbons from reservoirs to the surface, which made it difficult to understand the features and pathways of deep hydrocarbon microseepages. Understanding the processes of hydrocarbon microseepages will contribute to the acceptance and effectiveness of surface geochemistry. Based on a simplified geological model of hydrocarbon microseepages, including hydrocarbon reservoir, direct caprock, overlying strata and Quaternary sediments, this work established a 3D experimental system to simulate the mechanisms and processes of deep hydrocarbon microseepes extending to the surface. The dispersive halos of microseeping hydrocarbons in the subsurface were adequately described by using this 3D experimental system. Results indicate that different migration patterns of hydrocarbons above the point gas source within the simulated caprock and overlying strata can be reflected by the ratio of i-butane to n-butane (i-C4/n-C4), which follow diffusion and infiltration (buoyancy) mechanisms. This is not the case for vertical measurement lines far from the point gas source. A vertical gas flow in the form of a plume was found during hydrocarbon microseepage. For sampling methods, the high-density grid sampling is favorable for delineating prospecting targets. Hydrocarbon infiltration or buoyancy flow occurs in the zones of infiltration clusters, coupling with a diffusion mechanism at the top of the water table and forming surface geochemical anomalies. These results are significant in understanding hydrocarbon microseepage and interpreting SGE data.     

昆明盐矿三维建模及溶通性分析

针对地下盐矿在开采过程中,随时可能会因为溶通状况的改变而发生坍塌地质灾害,本文利用矿山数字管理软件Quanty Mine,确定昆明盐矿的三维模型,以期监控盐矿开采不同阶段溶通的变化规律,为避免盐矿过度开采导致地质灾害的发生。     

遥感在宁夏贺兰山东北段1∶50000区域地质调查中的应用研究

以SPOT5及ETM+影像为基础数据,采用3D GIS遥感技术,通过对研究区岩性地层、线性构造、环形构造等地质体的遥感影像特征系统总结,结合野外调查,建立岩性地层及构造解译标志,对宁夏贺兰山东北段1∶50 000区域地质调查工作区进行遥感地质解译。解译结果表明:研究区西部多被贺兰山岩群和古元古代花岗岩覆盖,中部及东南部大部分为第四系和新近系地层;东部石峡谷、黑龙贵及老石旦镇地区,主要出露地层有奥陶系及寒武系;研究区构造发育,主要分布在西部贺兰山基岩区,共解译出线性构造113条,以NEE向和近SN向线性构造最为发育,线性构造相互切割,形成"块状"特征;环形构造33个,在区域上总体呈SN向条带状分布;褶皱4处,均为紧密型褶皱组合;不整合界线1条;总体呈"西部构造发育,局部呈块状,东西差异明显"的特点。实践表明,在1∶50 000区域地质调查中应用遥感和GIS相结合的方法,对提高区域地层构造认识以及遥感解译精度有较大帮助,能有效提高填图质量和工作效率,在区域地质调查工作中有良好的应用价值。     

基于物探数据的内蒙古哈达门沟金矿三维地质体建模

目前,可控源音频大地电磁法(CSAMT)的数据处理多以测线(断面)进行,以二维反演断面图作为成果输出,难以清晰、直观地显示三维地电结构的分布特征。以内蒙古哈达门沟CSAMT二维勘探数据为基础,结合当前三维地质体建模技术,利用三维建模软件,采用插值方法得到哈达门沟三维地质体模型,实现了多角度、多层面展现地下地质体的分布特征。应用这种三维可视化手段能较好地反映异常区域的分布、空间位置与形态,通过对良导体和相关构造的空间分布形态进行基本勾画,对矿产资源的进一步勘探、开发具有较好的找矿指导作用。     

面向矿床三维动态建模的地质勘探数据库增量更新方法

针对深部找矿过程中地质勘探数据增加和动态三维地质建模需要,提出了一种基于版本管理的矿床地质勘探数据库增量更新方法。在分析矿床地质勘探工程数据与三维地质模型映射关系的基础上,建立时序版本和建模版本作为矿床勘探数据增量更新版本标识。针对矿床地质勘探数据库增量更新的版本管理,提出了一种扩展的有向无环图版本管理模型,设计了基于关系数据库的版本管理方法并探讨了其实现过程。以安徽铜陵凤凰山矿床地质勘探数据为例,基于SQL Server数据库系统建立了实例矿床地质勘探版本数据库,以C#编程实现了实例矿床勘探数据库的版本管理,包括版本的建立、查询与显示等功能,通过勘探工程增量更新版本数据建立了三维矿体的动态修正模型,证实了方法的可行性与有效性。     

基于OS071X测波雷达的波浪探测分析

文章利用舟山海洋环境监测站2014年第16号台风"凤凰"过境影响期间,对OS071X测波雷达和3m波浪浮标在同一海域内的波浪探测资料进行了对比验证。通过分析,OS071X测波雷达探测反演的有效波高、周期与3m波浪浮标探测结果对比,二者按先后顺序的均方根误差分别为0.27m和0.29m,相关系数分别为0.93和0.90。结果表明,OS071X测波雷达系统的探测精度得到了验证,能够满足实时探测近岸海域波浪的需求。     

Discussion on applying an analytical method to optimize the anti-freeze design parameters for underground water pipelines in seasonally frozen areas

Adopting the quasi-three-dimensional (Quasi-3D) numerical method to optimize the anti-freeze design parameters of an underground pipeline usually involves heavy numerical calculations. Here, the fitting formulae between the safe conveyance distance (SCD) of a water pipeline and six influencing factors are established based on the lowest water temperature (LWT) along the pipeline axis direction. With reference to the current widely used anti-freeze design approaches for underground pipelines in seasonally frozen areas, this paper first analyzes the feasibility of applying the maximum frozen penetration (MFP) instead of the mean annual ground surface temperature (MAGST) and soil water content (SWC) to calculate the SCD. The results show that the SCD depends on the buried depth if the MFP is fixed and the variation of the MAGST and SWC combination does not significantly change the SCD. A comprehensive formula for the SCD is established based on the relationships between the SCD and several primary influencing factors and the interaction among them. This formula involves five easy-to-access parameters: the MFP, buried depth, pipeline diameter, flow velocity, and inlet water temperature. A comparison between the analytical method and the numerical results based on the Quasi-3D method indicates that the two methods are in good agreement overall. The analytic method can be used to optimize the anti-freeze design parameters of underground water pipelines in seasonally frozen areas under the condition of a 1.5 safety coefficient.     

Effects of initial step height on the headcut erosion of bank gullies: a case study using a 3D photo-reconstruction method in the dry-hot valley region of southwest China

Abstract

Headcut erosion has been recognized as one of the main processes involved in gully development in the dry-hot valley region of southwest China. To examine the effect of initial step height on headcut erosion processes, three headcuts were constructed ranging in height from 0.75 to 1.25 m on an active bank gully head, and a series of scouring experiments were conducted under a flow discharge of 120 L min^?1. The morphological evolutions of the plunge pools and soil loss volume were estimated by three-dimensional photo-reconstruction methods (3D-PR). As the step height increased, the experimental results showed that: (1) the transformed potential energy and shear stress would increase by approximately 4.89 J s^?1 and 26.4 Pa on average when the step height increased 0.25 m; (2) the mean depth and width of the plunge pool exhibited obvious growth, and the morphology of the cross-section developed from approximately V-shaped to U-shaped; and (3) soil loss volume increased logarithmically, with total soil loss volumes of 0.076, 0.105 and 0.116 m³, respectively. Although the significant effects of the initial step height on headcut erosion were verified, further quantitative studies are required to quantify the mechanism of headcut erosion, especially for plunge pool erosion.     

A new model of edge-to-edge contact for three dimensional discontinuous deformation analysis

A robust contact theory can be regarded as key to three dimensional discontinuous deformation analyses (3D-DDA). Not only must this theory provide an efficient algorithm to judge the type and location of contacts but also it must be able to present comprehensive formulations for every kind of contact (open, sliding and locked contact). There are six types of contact in three dimensional discontinuous deformation analyses (vertex-to-vertex, vertex-to-edge, vertex-to-face, edge-to-edge, edge-to-face and face-to-face) that can be converted to vertex-to-face and edge-to-edge contacts. This paper presents a new model of edge-to-edge contact to three dimensional discontinuous deformation analyses (3D-DDA). This new model considers both kinds of edge-to-edge contact (cross-over and parallel edge-to-edge contact) and presents a criterion for inter-penetration. Sub matrices of normal and shear spring and friction force are derived by geometrical analysis and penalty method. This new model is implemented in a 3D-DDA computer programme, and the example results demonstrate the validity of the model.     

AS350B3型直升机在中高山航空物探测量中的优势

中高山地区作业的航空地球物理勘探飞行器需要有高原适航性。通过对比空中国王350ER在起降条件、最大升限、最大续航能力及高原机动能力等特点,提出了在中高山地区的低高度、大比例尺的航空地球物理勘探飞行器的选型原则及飞行方法。通过甘肃某测区的实际测量飞行验证了该原则和方法的可行性。分析结果显示,AS350B3型直升机在中高山地区作业时表现出的实际飞行性能满足在该类型区域低高度、大比例尺的航空地球物理勘探的要求。