正压浅海湍流运动的雷诺应力封闭模型

根据湍流封闭理论,建立一种适用于正压浅海湍流运动的雷诺应力封闭模型(RSM),以代替目前三维浅海动力学模型中普遍采用的湍粘性系数的传统假设。通过直接建立并模化f—平面上正压海洋的雷诺应力传输方程,分别得到的微分形式和代数形式的RSM方程组。并讨论了进行数值计算所需要的边界条件。利用该模型可以进一步研究浅海潮流、风暴潮流及风海流等浅海流动的三维结构和湍流特性。     

分层流体中内孤立波在潜浮式竖直薄板上透射和反射

采用边缘层理论研究了两层流体系统中内孤立波在潜浮式竖直薄板上的透射和反射问题,提出了非线性演化方程的“初值”条件,分析了内孤立波与薄板非线性相互作用的效应。研究表明:流体层的密度比以及薄板伸入上下层的深度对于反射和透射波结构具有显著的影响,薄板伸入下层越深、密度差越小,则薄板阻碍孤立波透射的效率越高;透射波通常演化为单峰孤立波和迅速衰减的尾波,反射波演化为缓慢衰减的尾波列;对于具有小密度差的跃层结构,内孤立波在潜浮式竖直薄板上的透射及其演化近乎是无障碍的。     

南海及周边部分地区特提斯构造遗迹:问题与思考

对全球二叠纪－三叠纪古气候特征的研究表明，东特提斯地区晚三叠世古气候标志具有带状分布的特征。北巴拉望地块卡拉棉群岛科龙岛的晚三叠世沉积中发育反映较干燥古气候特征的鲕状灰岩，因此在古气候特征方面，北巴拉望地块晚三叠世地层不能与华南和印支地块同期地层对比，而应该与印度地块北缘喜马拉雅地区（向西）和琉球群岛（向东）对比。根据该古气候分析，北巴拉望地块在晚三叠世时应该位于南部亚热带较干燥气候带内，其晚三叠世的古地理位置比印支地块更靠南。对南海及南海周边部分地特提斯构造遗迹的研究，将有助于深入了解南海北部陆缘区相关构造带的性质及正确恢复南海扩张之前该区的地质发展历史。南海北部陆缘区也是研究解决特提斯构造向东延伸问题以及特提斯构造－太平洋构造时空转化问题的关键地区。     

Dynamic Analysis of a Single-Column Platform (II)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.     

A Note on Soil Structure Resistance of Natural Marine Deposits

It has been well documented that natural normally-consolidated marine soils are generally subjected to the effects of soil structure. The interpretation of the resistance of soil structure is an important issue in the theory study and engineering practice of ocean engineering and geotechnical engineering. It is traditionally considered that the resistance of soil structure gradually disappears with increasing stress level when the applied stress is beyond the consolidation yield stress. In this study, however, it is found that this traditional interpretation of the resistance of soil structure can not explain the strength behavior of natural marine deposits with a normally-consolidated stress history A new interpretation of the resistance of soil structure is proposed based on the strength behavior. In the preyield state, the undrained strength of natural marine deposits is composed of two components: one developed by the applied stress and the other developed by the resistance of soil structure. When the applied stress is beyond the consolidation yield stress, the strength behavior is independent of the resistance of soil structure.     

不同软基处理方法适用性比较

总结分析了国内外现有的软土地基处理的各种方法。通过对采用不同方法进行软基处理的工程实例处理效果的定量对比，发现不同软基处理方法的适用性差异很大，多数工程中仅用一种方法很难达到设计要求，而两种或多种方法联合则可望取得更好的效果。     

Jason-1: Assessment of the System Performances

On 7 December 2001, Jason-1 was successfully launched by a Boeing Delta II rocket from the Vandenberg Air Force Base, California. The Jason-1 satellite will maintain the high accuracy altimeter service provided since 1992 by TOPEX/Poseidon (T/P), ensuring the continuity in observing and monitoring the Ocean Dynamics (intraseasonal to interannual changes, mean sea level, tides, etc.). Despite one-fourth the mass and power, the Jason-1 system has been designed to have basically the same performance as T/P, measuring sea surface topography at a centimetric level. This new CNES/NASA mission also provides near real-time data for sea state and ocean forecast. The first two months of the Jason-1 mission have been dedicated to the assessment of the overall system. The goals of this assessment phase were:

1. To assess the behavior of the spacecraft at the platform and payload levels (Jason-1 being the first program to call on the PROTEUS versatile multimission platform for Low and Medium Earth Orbit Missions developed in partnership between Alcatel Space and CNES);

2. To verify that platform performance requirements are met with respect to Jason-1 requirements;

3. To verify that payload instruments performance requirements evaluated at instrument level are met;

4. To assess the performance of the Jason-1 Ground System.

This article will display the main outputs of the assessment of the system. It will demonstrate that all the elements of the onboard and ground systems are within the specifications. Provision of data to the Jason-1 Science Working Team started at the end of March 2002. This is the goal of a six-month phase after closure of the initial assessment phase to derive the error budget of the system in terms of altimetry user products.     

Hydroelastic Analysis of Very Large Floating Structures Using Plate Green Functions

1 .IntroductionRecentlygreatinteresthasbeenshowninthedevelopmentofverylargefloatingstructuressuchasMegaFloatofJapan (Isobe ,1 999)andMOBofUSA (Remmers ,1 999) .Owingtotheirextremelargesizeandgreatflexibility ,thecouplingbetweenthestructuraldeformationandfluidmotionissignifi cant.Thisisatypicalproblemofhydroelasticity .Efficientandaccurateestimationofthehydroelasticresponseofverylargefloatingstructuresinwavesisveryimportantfordesign .Manymethodshavebeenproposedinliteratureforthepredictiono…     

Acoustic plane-wave scattering from a rough surface over a random fluid medium

Acoustic plane-wave scattering from a rough surface overlying a fluid half-space with a sound-speed distribution subject to a small random variation is considered. Under the assumption that the surface roughness and medium randomness are statistically independent, the scattered field may be derived by first solving for the mean field in the medium, and then incorporating with boundary-perturbation method to obtain the total mean field and the power spectral density of the scattered field. The employed algorithm is compatible to the analysis available in the existing literature so that the formulations are conveniently integrated. The results for the power spectral density have shown that the effects of medium inhomogeneities on the rough surface scattering are limited in a spectral regime where the scattered components have shallow grazing angles. The distribution of the power spectral density over the space is primarily governed by the power spectrum and correlation lengths of the rough surface.     

Three-dimensional numerical simulation of obfique wave action on vertical walls

A three-dimensional numerical model based on the potential theory was developed to study the oblique wave action on vertical walls. A source term inside the domain was used to generate incident waves and outgoing waves were dissipated by sponge layers and transmitted by radiation boundaries. The finite difference method was used to solve the governing equations and boundary conditions in the regular transformed domain in σ-coordinate. Satisfactory agreements between the numerical predictions and experimental results of wave force were obtained. It is concluded that the maximum wave force acting on the vertical walls is induced by the obliquely incident waves rather than the normally incident waves.