洞穴完井工艺在寿阳地区煤层气钻井中的应用

洞穴完井工艺包括钻井、完井、排水采气等工序,为提高煤层渗透率,最大限度的保证煤层气解析与运移,洞穴完井一般要求有效井径3-4m,及一定范围的破碎带。远东能源公司为开采寿阳地区15#煤层中的煤层气,部署了4口生产井．其井身设计为三开结构。钻井主要设备为T685WS顶驱车载钻机及多台不同型号的空压机,采用潜孔锤冲击钻进．以空气、空气泡沫为冲洗介质,钻进至15#目标煤层底板以下46m处完钻,然后利用可伸缩式扩孔器进行扩孔。在扩孔至距三开井底8～10m时．开始采用空气和清水憋压,通过瞬间释放压力,使煤层坍塌,如此反复,至造穴直径达到要求。由于严格按照技术标准及操作流程作业,采取的技术措施合理,4口井均已顺利投入生产,增产效果显著。可见该种洞穴完井技术的应用,不仅可以保护煤层原生结构及环境,并且还能减少煤层气射孔、压裂等环节的费用．对于煤层气井施工具有重要的经济意义。     

煤层气固井声幅测井方法探讨

影响煤层气固井声幅测井的因素较多,如地层软硬变化大、套管内径或壁厚不均、仪器不居中、发射能量不足、接收灵敏度不够等,这些因素的存在将会导致首波丢失、时差曲线产生周波跳跃或波动现象。为提高煤层气固井声幅测井质量,要尽量保证所用仪器外径接近套管内径,以减少无效传播和能量损失,另外需提高仪器的发射能量及接收灵敏度;在自由套管和声波强吸收地层,必须保证自由套管首波不限幅、声波强吸收地层首波不丢失。在现场解释时,一般以＂自由套管＂处的偏转幅度值A为标准,将固井声幅曲线幅度的20%A和40%A作为分界点,评价固井效果。     

浅谈测井方法在工程勘察中的应用

地球物理测井应用于工程勘察中,能够较好地解决用钻探不易解决的问题,如有效判别薄夹层、寻找井旁隐伏断裂破碎带、判断孔内土层稳定性以及测定土层的速度等。其中自然伽马测井曲线在判定含砾粘土夹层及软弱薄粘土夹层等方面具有较高的准确性;声波、井径、自然γ、视电阻率等测井方法可有效查找井旁隐伏断裂破碎带,特别是声波测井曲线异常更为明显;另外跨孔实测剪切波速还可进行地基土加固效果检验。     

甘肃大泉水——白沙岘矿区含煤地层及煤层赋存特征

大泉水-白沙岘矿区位于甘肃省景泰县境内,在大地构造位置上处于北祁连加里东褶皱带东段,区内含煤地层为下石炭统靖远组和上石炭统羊虎沟组,属海陆交互相含煤沉积,根据岩性、岩相特征可划分为两个沉积旋回。该矿区主要可采煤层煤．层组赋存于羊虎沟组,厚1．71～9．00m,沿走向由西向东厚度变小,在大泉水井田可采厚度主要分布在V线以西,其东区段只是零星分布且不可采;在白沙岘井田煤层总厚度为2．99～5．15m,厚度变化小,属稳定煤层。煤：层组赋存于靖远组,仅分布在大泉水井田,厚1．33～8．88m,沿走向由西向东呈长透镜体状,西段和中段煤层发育较好．V线以东区段煤层变薄并出现无煤区。     

数值模拟技术在海坨子油田开发调整研究中的应用

讨论分析数值模拟技术在海坨子油田开发调整研究中的思路和方法,采用美国Landmark公司VIP2003．4版本数值模拟软件包进行模拟研究,通过参数准备,静、动态拟合,模拟出海坨子油田海S9—11井组1—9砂组各小层剩余储量大小及不同阶段流体饱和度分布,结合可视化技术形象描述了海坨子油田剩余油变化规律及潜力区,在此基础上预测不同井网加密方式开发指标,并优选出最佳方案,为海坨子油田下步开发调整提供了重要依据,取得了较好的效果。     

Actinic flux and photolysis frequency comparison computations using the model PHOTOGT

The accurate radiative transfer model GOMETRAN, initially designed to yield radiances at TOA in the wavelength range 240–790 nm, has been extended to allow for the computation of actinic fluxes down to 175 nm and for the calculation of photolysis frequencies in the atmosphere. The capability of the extended model PHOTOGT (PHOTOGOMETRAN) is demonstrated in a number of successful comparison studies both with recent experiments (ground-based, balloonborne, airborne) and model calculations of radiances, actinic fluxes and photolysis frequencies in the stratosphere and troposphere. In an atmospheric case study, the impact of new quantum yield data for the O₃ » O₂+O(¹ d) photodissociation channel on the photolytic production of O(¹ d) atoms in the lower atmosphere has been quantified.     

RATIONAL UTILIZATION OF MOUNTAIN SOILS IN SOUTHEAST QINGHAI-XIZANG (TIBETAN)PLATEAU

ISoil-fo~gEnvironmentandMainSoilTrocsThesoLItheastQinghai-Xizang(Tibetan)PlateauwheretheHengduanMoUnains,eastempartoftheThmalayanandNyainqentanglhamoUnainsarelocatedextendsfrom25'to34"Nand92'to1O5'Ewithanareaof5OO,OOOkm',oraboutone-fiffooftheentireQinghai-XiZangPlateau.ItisatransitionalzoneofdeePdisseCtedmoUntainseXtendingsoutheastWardpenpherallowlandsandwichedin-betWeenSichuanBasinandcentralYunnanPlateau.Whletheterrainofthesmponinclinestosoutheast,thealtitudeofthevaIleysraises…     

Sub-arcsec 10 μm imaging of β pictoris and other star disk candidates

We have used the ESO 10 m camera, TIMMI, to image with a very high angular resolution (PFoV: 0.3; FWHM:0.9) several main-sequence star disk candidates. Information on the -Pictoris dust disk has been obtained in a region largely inaccessible to previous observations: 0–80 AU, with a resolution of about 5 AU after deconvolution. Another promising target for 10 m imaging, 51 Ophiuchi, appears point-like.based on data collected at the European Southern Observatory (ESO), La Silla, Chile     

On the pH-dependent formation constants of iron(III)-sulfur(IV) transient complexes

An experimental study is described of Fe(III)-S(IV) formation constants measured as a function of pH (1–3), ionic strength (0.2–0.5 M) and [Fe(III)] _T (2.5–5.0×10^–4 M) using a continuous-flow spectrophotometric technique to make observations 160 ms after mixing. Preliminary experiments using pulse-accelerated-flow (PAF) spectrophotometry to measure rate constants on a microsecond timescale are also described. The conditional formation constant at 25 °C can be modeled with the following equation: {ie307-1} where {ie307-2}K ₇ andK ₈ can be interpreted as intrinsic constants for the coordination of HSO ₃ ^– by FeOH²⁺ and Fe³⁺, respectively, but until further evidence is obtained they should be regarded as fitting constants. PAF spectrophotometry showed that the initial reaction of Fe(III) with S(IV) (pH 2.0) is characterized by a second-order rate constant of 4×10⁶ M^–1 s^–1 which is comparable to rate of reaction of FeOH²⁺ with SO ₄ ^2– . However, the PAF results should be regarded as preliminary since unexpected features in the initial data indicate that the reaction may be more complex than expected.     

Kinetics of redox cycling of iron coupled with fulvic acid

The kinetics of conversion of iron(III) (hydr)oxides to ferrous iron mediated by fulvic acid have been investigated in order to improve the understanding of the redox cycling of iron at the oxic-anoxic boundary in natural waters. Under the conditions similar to natural waters, fulvic acid is able to reduce the iron(III) (hydr)oxide. The kinetics of the reaction depend on the reactivity of iron(III) (hydr)oxides and the reducing power of the fulvic acid. The rate of reaction is 60 nm/h obtained under following conditions: total concentration of Fe(III) 1.0 × 10^–4 M, pH 7.5, fulvic acid 5 mg/L. The rate is considered as a net result of reduction and oxidation in the > Fe^III-OH/Fe(II) wheel coupled with fulvic acid. In a real natural water system, reductants other than fulvic acid may be of importance. The results obtained in the laboratory, however, provide evidence that the Fe(OH)₃(s)/Fe(II) redox couple is able to act as an electron-transfer mediator for the oxidation of natural organic substances, such as fulvic acid by molecular oxygen either in the absence of microorganisms or as a supplement to microbial activity.