The Soil Moisture and Net Primary Production Affected by CO_2 and Climate Change Using a Coupled Model

In this paper, a coupled model was used to estimate the responses of soil moisture and net primary production of vegetation （NPP） to increasing atmospheric CO2 concentration and climate change. The analysis uses three experiments simulated by the second-generation Earth System Model （CanESM2） of the Canadian Centre for Climate Modelling and Analysis （CCCma）, which are part of the phase 5 of the Coupled Model Intercomparison Project （CMIP5）. The authors focus on the magnitude and evolution of responses in soil moisture and NPP using simulations modeled by CanESM, in which the individual effects of increasing CO2 concentration and climate change and their combined effect are separately accounted for. When considering only the single effect of climate change, the soil moisture and NPP have a linear trend of 0.03 kg m^-2 yr^-1 and-0.14 gC m^- 2 yr^-2, respec- tively. However, such a reduction in the global NPP results from the decrease of NPP at lower latitudes and in the Southern Hemisphere, although increased NPP has been shown in high northern latitudes. The largest negative trend is located in the Amazon basin at -1.79 gC m^-2 yr^-2. For the individual effect of increasing CO2 concentration, both soil moisture and NPP show increases, with an elevated linear trend of 0.02 kg m^-2 yr^-1 and 0.84 gC m^-2 yr^-2, respectively. Most regions show an increasing NPP, except Alaska. For the combined effect of increasing atmospheric CO2 and climate change, the increased soil moisture and NPP exhibit a linear trend of 0.04 kg m^2 yr^-1 and 0.83 gC m^2 yr^-2 at a global scale. In the Amazon basin, the higher reduction in soil moisture is illustrated by the model, with a linear trend of-0.39 kg m^-2 yr^-1, for the combined effect. Such a change in soil moisture is caused by a weakened Walker circulation simulated by this coupled model, compared with the single effect of increasing CO2 concentration （experiment M2）, and a consequence of the reduction in NPP is also shown in this area, with a linear trend of-     

Genetic parameter estimation for juvenile growth and upper thermal tolerance in turbot (Scophthalmus maximus Linnaeus)

Twenty-six half-sib groups(53 full-sib families) of turbot, Scophthalmus maximus Linnaeus, were obtained by artificial insemination. We measured growth in the offspring(40–50 individuals/family) and subjected them to a thermal tolerance challenge over a period of 34 d. There was no significant difference in daily mortality(range: 0.580%–1.391%) between Days 1–13 during the thermal tolerance challenge. However, daily cumulative mortality increased rapidly between Days 14 and 29, especially on Days 15 and 16(20.232% and 34.377%, respectively). Mortality was highest on Day 16(14.145%). We estimated the genetic parameters using the average information restricted maximum likelihood method. We used a likelihood ratio test to evaluate the significance of effects in models with and without identity as an effect, and compared the final log-likelihoods(maximum log L). Lastly, we estimated phenotypic and genetic correlation between the upper thermal tolerance limit(UTT) and body weight(BW). In this study, the positive phenotypic correlation was low between UTT and BW(0.093±0.029). The genetic correlation between UTT and BW was negative(-0.044±0.239). The heritability for upper thermal tolerance was low(0.087±0.032), which is of approximately moderate heritability. The heritability for body weight was high(0.303±0.074). Our results suggest there is significant potential for improvement in the culture of turbot by selective breeding.     

海洋水声通信节点的耐压舱体设计及多重应力分析

水下通信节点是实现深水通信的重要载体,也是实现海洋开发和勘测的重要设备,耐压舱体是承受外部压力、保护内部设备正常工作的重要装置。为了满足在海洋1 500 m深度的实际应用需要,采用传统的耐压舱体结构设计整体分析的方法,对整体结构的稳定性进行了设计验证;在实际工程应用中,因局部特殊结构的需要破坏了耐压舱体的整体连续性,使得局部的应力突变和结构的不稳定造成整体的设计失败,耐压舱体的合理性设计也变得非常复杂;根据耐压舱体几何结构连续和不连续性,将耐压舱体的应力区分为应力连续区和不连续区,结合ANSYS数值仿真的方法进行分析,通过局部加厚的方法,在满足实际需要的前提下,尽可能减小厚度降低成本。     

高光谱大气红外探测仪(AIRS)反演大气不稳定度指数在强对流天气个例中的应用试验

使用探空、NCEP-FNL,数据和高光谱分辨率大气垂直探测仪(AIRS)标准反演数据计算大气不稳定度指数,对2011年6月23日北京强对流天气发生前的本地及上游大气中不稳定能量进行分析研究。分析发现:利用08、14和20时探空数据计算的北京站不稳定度指数显示了在"6·23暴雨"过程发生前后北京上空不稳定能量变化,上游关键区无探空数据;利用NCEP和AIRS数据计算的不稳定度指数显示,强对流天气发生前,在北京的上游关键区大气处于极端不稳定状态(K指数大于40,SI指数小于一5),有利于强对流天气发生。文章的研究结果表明,探空数据时空分辨率较低,不利于监测强对流天气的发生;质量控制后AIRS数据计算的不稳定度指数可以监测对流天气的发生;空间分辨率较低的NCEP数据监测小范围大气不稳定层结能力较低。综上所述,AIRS反演产品具有弥补探空资料时空分辨率不足的优势,利用AIRS L2反演产品计算晴空大气不稳定度指数产品可以监测到"6·23暴雨"天气发生前上游关键区大气层结稳定度状态,为预报员决策提供有效的辅助信息。     

天宫一号高光谱数据辐射校正的CUDA并行优化

高光谱图像经过辐射校正后,消除了探测元的响应差异,能更好地满足专题信息提取的数据要求.利用探测元的列均值、列标准差等统计信息对天宫一号高光谱短波红外数据进行辐射校正检验,并基于GPU CUDA计算模型对均值归一化、矩匹配、相邻列均衡等3种相对辐射校正算法进行了并行计算优化.通过辐射校正计算流程拆分,CPU控制流程逻辑,GPU执行数据级并行计算,并建立CUDA的计算单元与数据单元的映射关系,获得5—7倍的计算加速比,这些辐射校正算法依据图像自身统计信息,且易于进行并行计算优化,满足实时校正的处理时效要求,为未来高光谱数据在轨实时辐射校正提供了新思路.     

面向对象规则和支持向量机的天宫一号高光谱影像分类

传统的高光谱分类方法通常基于单一像元的光谱或纹理特征,很少考虑地物空间结构信息与空间相关特征.本文将面向对象规则与基于像元的分类进行融合,利用对象的空间结构特征和光谱特征进行混合分类,旨在克服像元层次分类的不足.本文尝试性的提出了两种混合分类方法:(1)基于分形网络演化的多尺度分割支持向量机分类(2)基于多层分水岭分割的SVM分类,并将这两种方法应用到天宫一号高光谱数据上.结果表明:基于面向对象规则的混合分类方法有效地提高了分类精度,不仅能够改善同谱异物现象,而且解决分类结果中地物破碎的问题.     

高动态宽带信号码跟踪方法仿真分析

针对高动态场景,单独的码环路很难实现跟踪,由于高动态载波跟踪的算法很成熟,通常应用载波跟踪结果对码环路进行辅助,针对窄体制信号,这种方法可以帮助消除码环的动态误差,但对宽体制信号来说,辅助力度减小。从高动态宽带信号码跟踪误差门限以及跟踪精度入手,分析了单独码跟踪算法的易失锁性,理论和仿真验证应用高动态载波跟踪结果辅助码跟踪算法的有效性,且具有高的跟踪精度。这为导航接收机的跟踪算法提供了理论依据。     

高分五号高光谱数据融合方法比较

数据融合是解决高光谱卫星在时空分辨率等指标上受限的有效途径,探讨不同方法在GF-5高光谱数据上的融合效果,对GF-5高光谱数据的信息挖掘与推广应用有着重要意义。本文本着算法简单易用、适于推广的原则,采用GS（Gram-Schmidt）葛兰—施密特正交变换融合算法、GSA（GS Adaptive）自适应GS融合算法、CNMF（Coupled Non-negative Matrix Factorization）耦合非负矩阵分解融合算法、CRISP-W（Color Resolution Improvement Software Package with Wavelet transform）基于小波变换和CRISP-B（Color Resolution Improvement Software Package with Butterworth）基于巴特沃斯滤波器的分辨率提升融合算法、GLP（Generalized Laplacian Pyramid）广义拉普拉斯金字塔融合算法共6种融合方法,分别对BJ-2、GF-2、GF-1、GF-1C、GF-1D国产卫星多光谱数据与GF-5高光谱数据进行融合实验。通过目视分析、指标评价（相关系数、通用图像质量指标、峰值信噪比、光谱角、全局综合误差）、分类应用、时间成本4种方式对融合结果进行综合比较分析。结果表明,相融合的一组图像系列相同、空间分辨率相差越小,融合结果越好。CRISP-B、CRISP-W、GLP在提升空间分辨率、光谱保真度方面能达到较好的平衡,空间重建方面,GLP稍优且更稳定,CRISP-B、CRISP-W则在光谱信息保持方面稳定性更强且效果更好。数据源会对融合方法产生一定的影响,在光谱特征信息提取、分析等对光谱保真度要求高的工作中,GLP更适合同源数据（如GF-5与GF-1/1C/1D/2）融合,而在多源数据间（如GF-5与BJ-2）进行融合时,则优先选择CRISP-W。CNMF存在一定程度的色彩畸变,且运行时间较长。GSA、GS融合效果最差,其中,GSA不论是光谱保持能力还是空间分辨率提升能力均较GS更稳定。在小样本高光谱图像分类应用中,CRISP-B融合结果分类效果稳定,分类精度较高。GSA融合结果空间细节丰富,虽光谱失真较为严重,但同时增大了地物光谱分离度,仍适用于准确勾勒建筑物、道路等地物。本研究为GF-5高光谱数据与其他国产卫星多光谱数据融合方法的选择提供参考,有助于高分五号高光谱数据的应用与推广。