http://www.sciencedirect.com/science/article/pii/S1674987110000071

<正>The lithospheric structure of China and its adjacent area is very complex and is marked by several prominent characteristics.Firstly,China's continental crust is thick in the west but thins to the east,and thick in the south but thins to the north.Secondly,the continental crust of the Qinghai—Tibet Plateau has an average thickness of 60—65 km with a maximum thickness of 80 km,whereas in eastern China the average thickness is 30—35 km,with a minimum thickness of only 5 km in the center of the South China Sea.The average thickness of continental crust in China is 47.6 km,which greatly exceeds the global average thickness of 39.2 km.Thirdly,as with the crust,the lithosphere of China and its adjacent areas shows a general pattern of thicker in the west and south,and thinner in the east and north.The lithosphere of the Qinghai—Tibet Plateau and northwestern China has an average thickness of 165 km, with a maximum thickness of 180—200 km in the central and eastern parts of the Tarim Basin,Pamir, and Changdu areas.In contrast,the vast areas to the east of the Da Hinggan Ling—Taihang—Wuling Mountains,including the marginal seas,are characterized by lithospheric thicknesses of only 50—85 km.Fourthly,in western China the lithosphere and asthenosphere behave as a "layered structure", reflecting their dynamic background of plate collision and convergence.The lithosphere and asthenosphere in eastern China display a "block mosaic structure",where the lithosphere is thin and the asthenosphere is very thick,a pattern reflecting the consequences of crustal extension and an upsurge of asthenospheric materials.The latter is responsible for a huge low velocity anomaly at a depth of 85—250 km beneath East Asia and the western Pacific Ocean.Finally,in China there is an age structure of "older in the upper layers and younger in the lower layers" between both the upper and lower crusts and between the crust and the lithospheric mantle.     

常数和变化积雪密度方案诊断计算积雪厚度的敏感性研究

海冰上积雪的分布是影响海冰与大气能量交换以及气候变化的重要因素。当前的CMIP6气候模式（如CESM2和NESM3）采用定常的积雪密度,而专注于模拟雪厚度和密度变化的模式（如SnowModel-LG）则采用经验的变化雪密度公式。对比CryoSat-2卫星观测的积雪厚度发现,从积雪厚度的空间分布与平均值难以判断出变化雪密度对北冰洋积雪厚度模拟产生何种影响,对于变化雪密度模拟积雪厚度的改进及机制有待进一步研究。本文采用随气温、风速等因子变化的雪密度经验公式模型,并利用SNOTEL单站的长时间序列观测资料,对不同影响因子设计如下敏感性实验:A. 考虑所有气象因子的变化雪密度模型;B. 常数雪密度模型;C. 在A中不考虑风对密实化的影响;D. 在A中不考虑气温对密实化的影响。实验A、B、C和D诊断计算的2018年11月1日至2019年5月10日积雪厚度的均方根误差分别为4.2 cm、4.8 cm、25.9 cm和4.2 cm。结果表明,变化雪密度方案A模拟的积雪密度、厚度在平均值上与常数雪密度的结果接近,但其模拟的积雪厚度均方根误差最小,并且能够模拟出积雪厚度在几天到十几天时间尺度上的高频变化,同时减小了这种高频变化对应时段雪厚模拟结果的相对误差,二者具有一定的相关性。此外,还发现气温变化对积雪密实化的影响远小于风。     

基于PROSAIL模型的广州市过渡带森林植被冠层可燃物含水率估算

基于PROSAIL模型,结合野外实测叶片等水分厚度、干物质重量、叶面积指数数据,构建一种基于归一化红外指数和归一化干物质指数的植被冠层可燃物含水率估算方法。首先,在PROSAIL模型输入实测参数模拟植被冠层光谱曲线,计算归一化红外指数、归一化干物质指数用于叶片等水分厚度、干物质重量的反演。结果表明：归一化红外指数与叶片等水分厚度、归一化干物质指数与干物质重量存在明显的线性关系,基于该关系建立叶片等水分厚度、干物质重量的经验估算模型,经验证估算结果精度较高;将该经验模型推广至利用Landsat 8数据拟合植被冠层可燃物含水率,并与实测数据进行验证,结果显示R²达到0.743,RMSE达到34.2%,具有较高的精度。文章提出的植被冠层可燃物含水率估算模型,可实现广州市过渡带森林大面积、较高精度植被冠层可燃物含水率监测,为预防森林火灾提供参考。     

地热学岩石圈厚度计算方法综述

地热学岩石圈厚度体现了长时间尺度上的岩石圈热学作用,可以反映地球深部动力学过程。介绍了地热学岩石圈厚度的计算方法,探讨了这种方法的参数选取和影响因素,并对比了地热学岩石圈厚度与其他类型岩石圈厚度的差异及其原因。结果表明:地热学岩石圈厚度的计算结果受地壳分层结构、岩石生热率、岩石热导率以及地表热流的影响;地质历史时期内的地壳分层结构要结合岩石学、岩石地球化学等领域最新研究成果得出;地表热流较低(42mW·m-2)时,岩石圈地幔生热率对计算结果的影响非常显著,岩石圈地幔生热率变化0.02μW·m-3,地热学岩石圈厚度计算结果最高变化40km,岩石圈地幔热导率每变化0.2W·(m·K)-1,地热学岩石圈厚度变化15km;地表热流为60mW·m-2时,岩石圈地幔生热率每变化0.02μW·m-3,地热学岩石圈厚度变化3km,岩石圈地幔热导率每变化0.2W·(m·K)-1,地热学岩石圈厚度变化5km;地表热流增高1mW·m-2,地热学岩石圈厚度约增加3km;地热学岩石圈厚度与岩石学、地震学岩石圈厚度略有差异,其差异取决于流变边界层的厚度。     

昆明坝子边界层贴地逆温特征及其成因

利用昆明2004~2006年08 h气象加密探空资料对昆明坝子贴地逆温进行了分析,结果显示:昆明坝子贴地逆温年频率为59.9%,厚度为120 m,强度为0.9℃/100 m,与国内其他地区相比具有出现频率高,厚度小,强度略强的特点。昆明坝子贴地逆温频率、厚度、强度呈单峰型年变化,春季频率最高、厚度最厚、强度最强;夏季频率最低、厚度最薄、强度最弱,其变化受降水、风速、晴夜状况变化的影响。坝子地形是影响贴地逆温的重要因素,昆明坝子地形对坝内贴地逆温具有保护稳定作用,尤其是对辐散冷却逆温过程的保护,同时也影响贴地逆温的厚度和强度。昆明坝子贴地逆温存在辐射逆温、地形逆温、水体平流逆温的共同影响,但辐射冷却逆温是主导机制。     

Aerosol Type Identification Using PARASOL Multichannel Polarized Data

PARASOL （Polarization ＆ Anisotropy of Reflectances for Atmospheric Sciences coupled with Ob- servations from a Lidar） multi-channel and mul- ti-directional polarized data for different aerosol types were compared. The PARASOL polarized radiance data at 490 nm, 670 nm, and 865 nm increased with aerosol optical thickness （AOT） for fine-mode aerosols; however, the polarized radiances at 490 nm and 670 nm decreased as AOT increased for coarse dust aerosols. Thus, the vari- ation of the polarized radiance with AOT can be used to identify fine or coarse particle-dominated aerosols. Polar- ized radiances at three wavelengths for fine- and coarse-mode aerosols were analyzed and fitted by linear regression. The slope of the line for 670 nm and 490 nm wavelength pairs is less than 0.35 for dust aerosols. However, the value for fine-mode aerosols is greater than 0.60. The Support Vector Machine method （SVM） based on 12 vector features was used to discriminate clear sky, coarse dust aerosols, fine-mode aerosols, and cloud. Two cases were given and validated by AErosol RObotic NETwork （AERONET） measurements, MODIS （Mod- erate Resolution Imaging Spectroradiometer） FMF （Fine Mode Fraction at 550 nm） images, PARASOL RGB （Red Green Blue） images, and CALIOP （Cloud-Aerosol Lidar with Orthogonal Polarization） VFM （Vertical Feature Mask） data.     

基于卫星高度计的北极海冰厚度变化研究

A modified algorithm taking into account the first year(FY) and multiyear(MY) ice densities is used to derive a sea ice thickness from freeboard measurements acquired by satellite altimetry ICESat(2003–2008). Estimates agree with various independent in situ measurements within 0.21 m. Both the fall and winter campaigns see a dramatic extent retreat of thicker MY ice that survives at least one summer melting season. There were strong seasonal and interannual variabilities with regard to the mean thickness. Seasonal increases of 0.53 m for FY the ice and 0.29 m for the MY ice between the autumn and the winter ICESat campaigns, roughly 4–5 month separation, were found. Interannually, the significant MY ice thickness declines over the consecutive four ICESat winter campaigns(2005–2008) leads to a pronounced thickness drop of 0.8 m in MY sea ice zones. No clear trend was identified from the averaged thickness of thinner, FY ice that emerges in autumn and winter and melts in summer. Uncertainty estimates for our calculated thickness, caused by the standard deviations of multiple input parameters including freeboard, ice density, snow density, snow depth, show large errors more than 0.5 m in thicker MY ice zones and relatively small standard deviations under 0.5 m elsewhere. Moreover, a sensitivity analysis is implemented to determine the separate impact on the thickness estimate in the dependence of an individual input variable as mentioned above. The results show systematic bias of the estimated ice thickness appears to be mainly caused by the variations of freeboard as well as the ice density whereas the snow density and depth brings about relatively insignificant errors.     

Dispersal of the Zhujiang River (Pearl River) derived sediment in the Holocene

High-resolution Chirp profiling and coring reveals an elongated(ca. 400 km) Holocene Zhujiang River(Pearl River)-derived mud area(maximum thickness 20 m) extending from the Zhujiang River Delta, southwestward off the Guangdong coast, to the Leizhou Peninsula. Two depo-centers, one proximal and one distal, are identified. On the continental shelf off the west Guangdong Province, the mud is deposited in water depth shallower than 50 m; while to the southeast of the Zhujiang River Estuary, the mud area can extend to the-120 m isobath. A combined analysis with the stratigraphic sequences of other muddy deposits in the Western Pacific marginal seas(mainly Changjiang(Yangtze) and Huanghe(Yellow) Rivers derived) indicates that the initiation of the Zhujiang River muddy deposit can be further divided into two stages: Stage 1 is before the mid-Holocene sea-level highstand(ca. 7.0 cal. ka BP), the proximal mud was mostly deposited after 9.0 cal. ka BP, when the sea-level rose slowly after the Meltwater Pulse-1C; Stage 2, after the mid-Holocene sealevel highstand, clinoform developed on the continental shelf off the west Guangdong Province, extending ca. 400 km from the Zhujiang River Estuary. The proximal clinoform thins offshore, from ca. 10 m thickness around 5–10 m water depth to less than 1–2 m around 20–30 m water depth. In addition, we also find a developed distal clinoform in the east of the Leizhou Peninsula.     

江西会昌周田镇地面塌陷灾害CSAMT法勘查实例分析

介绍了江西会昌县周田镇地面塌陷灾害物探CSAMT法勘查技术、资料分析、勘查成果及验证情况。对了解塌陷区盖层有效厚度、塌落现状、塌陷区后续具体治理方案及决策有十分重要的意义,对在类似地电条件下地质灾害物探勘查方法的选择、资料解释等具一定的借鉴意义。     

鄂尔多斯盆地西南缘奥陶系马家沟组烃源岩饱和烃特征研究

奥陶系马家沟组是鄂尔多斯盆地下古生界的烃源岩层系之一,为了进一步认识马家沟组烃源岩的地球化学特征,本文以鄂尔多斯盆地西南缘典型剖面烃源岩样品为研究对象,利用GC-MS分析方法对研究样品的饱和烃馏分进行了分析。研究表明鄂尔多斯盆地西南缘马家沟组烃源岩岩性不同,其生物标志化合物分布特征也存在差异。根据生物标志化合物特征推断,马家沟组各类源岩的沉积环境为盐度较高的还原环境,灰岩沉积环境的氧化性略高于灰质泥岩;灰岩的有机质母质来源以低等水生生物和微生物为主,而灰质泥岩有高等植物来源的有机质混入,有机质的热演化程度均达到成熟阶段;马家沟组各类源岩有机质均经历过降解作用,且碳质泥岩中有机质遭受的降解作用要强于灰岩。