褐藻胶裂解酶产生菌Vibro sp.QY102的发酵条件优化

对海洋来源的Vibro sp.QY102的产褐藻胶裂解酶的发酵条件进行研究。结果表明,该菌株最适液体培养基成分为(w/v):0.5%褐藻酸钠;0.4%蛋白胨;0.3%KH2PO4;0.7%K2HPO4.3H2O;2%NaCl;0.01%MgSO4.7H2O,pH=6.0。按3%的接种量接入培养基,30℃150 r/min振荡培养120 h,产酶达到10.2 U/mL,为优化前的4.5倍。Mg2 是该菌株产酶所必需的,这在其他褐藻胶裂解酶生产菌株中未见报道。该菌株产酶发酵条件的研究,为褐藻胶裂解酶的大规模制备及应用奠定了基础。     

国产常用风杯风速表距离常数的测量和分析

According to the tunnel test, distance constants of big, medium,small cup anemometers produced and used in our country, they are determined to be:Lbig c.a.=8.4m Lmedium c.a.=5.8m Lsmall c.a.=4.0m.     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

Study on Key Technology of Using Shell Sand as Backfill for Sea Reclamation

1 .IntroductionEpicontinental sea or land could formfromcontinental shelf because of the decreasing sea levelduring Quaternary.There is a large-area shell sand deposit more than ten meters thick in the neriticzone of China .To use the abundant marine shell sandresource as engineering material for ocean engi-neering and port engineeringis veryimportant .Sand (Gred and Bjorn,1999) ,fine sand (Zhangetal .,2002) , mediumand coarse sand (Qiuet al .,1995) ,highly weathered stone ballast (Zhanetal…     

藓羽藻(Bryopsis hypnoides)核酮糖-1，5-二磷酸羧化酶／加氧酶的分离与活性测定

采用硫酸铵分部沉淀与凝胶过滤的方法，进行藓羽藻Rubisco的分离研究。结果表明，分离的藓羽藻Rubisco经SDS-聚丙烯酰胺凝胶电泳检测呈两条清晰条带，分别为Rubisco大亚基与小亚基；与菠菜相比，藓羽藻Rubisco大亚基分子量与菠菜基本相同，而小亚基较之稍大一些。藓羽藻Rubisco活力测定结果表明，Rubisco分离过程中用硫酸铵分部沉淀后活力降低许多，分离后活力有所上升，但仍比粗提液活力弱；在Rubisco活力测定过程中，藓羽藻Rubisco的活化温度与其它物种Rubisco活化的温度不同，在低温下活化效果较好。这些结果说明Rubisco的酶活力受硫酸铵的影响而且藓羽藻Rubisco相对陆地高等植物结构不稳定。     

低凝固温度琼脂糖的制备方法研究

以石花菜分级得到的琼脂糖为原料，采用甲基化方法制备低凝固温度琼脂糖。所得到的低凝固温度琼脂糖产品的凝固温度为30．1℃(1.5％浓度)，融化温度为64．8℃(1．5％浓度)，凝胶强度为264g／cm^2(1.0％浓度)，主要质量标准与Sigma公司的低凝固温度琼脂糖产品接近，符合低凝固温度琼脂糖产品的质量要求。     

南沙西南地区新构造运动及其动力学机制

本文根据南沙西南地区的岩石圈动力学环境，把本区新构造运动类型划分为拉张型，挤压型，平移剪切型和旋动型，并对其构造演化阶段和动力学机制进行了初步分析。     

外生铀矿成矿系统研究与古水动力分析

分析了砂岩型铀矿的国内外研究现状和发展趋势,尝试从成矿系统演化论的角度提出新的研究思路：即,以系统观为指导,以物质迁移的动力学为主线,从区域地质背景演化,特别是构造动力演化、岩相古地理等方面入手,恢复矿前期、成矿期、矿后期的区域古地形格局。运用融入了地下水流动系统理论的古水文地质分析方法,重建区域演化进程中各地质时期的古流场。着重从区域尺度上研究矿质的源-迁移-汇（成矿）-保存的动力学过程。     

新型支座在高墩大跨桥梁中的应用研究

以某高墩大跨桥梁为例,将工程结构减隔震技术应用于高墩桥梁的抗震设计中。深入分析了在盆式橡胶支座和新型双曲面支座下,运用有限元软件ANSYS对不同墩高的桥梁进行地震反应模拟的工作原理及力学模型,对二者进行了对比。指出了新型双曲面支座的优点,为以后的高墩桥梁的减隔震提供一些借鉴。     

Fractal-like adsorption kinetics of Pb^2＋ in rocks

The adsorption kinetics of Pb^2＋ in rocks has been studied using ion selective electrodes and atomic absorption spectrophotometer. The results showed that the adsorption process is a fractal-like reaction. The adsorption rate was relatively high before 30 minutes, and then dropped. The saturated adsorption capacity （a） of Pb^2＋ and kinetic parameters （b, a, D and k） increased with increasing initial concentrations of Pb^2＋. These parameters （except a） decreased while Na^＋ was present in the solution. Furthermore, the smaller the rocks were in grain size, the bigger these kinetic parameters would be, though the parameter a was almost constant.