New photometric investigation of the low-mass-ratio contact binary star V1853 Orionis

Four-color charge-coupled device(CCD) light curves in the B, V, Rc and I c bands of the totaleclipsing binary system V1853 Orionis(V1853 Ori) are presented. By comparing our light curves with those published by previous investigators, it is determined that the O'Connell effect on the light curves has disappeared. By analyzing those multi-color light curves with the Wilson-Devinney code(W-D code),it is discovered that V1853 Ori is an A-type intermediate-contact binary with a degree of contact factor of f = 33.3%(3.7%) and a mass ratio of q = 0.1896(0.0013). Combining our 10 newly determined times of light minima together with others published in the literature, the period changes of the system are investigated. We found that the general trend of the observed minus calculated(O-C) curve shows a downward parabolic variation that corresponds to a long-term decrease in the orbital period with a rate of d P/dt =-1.96(0.46)×10^-7 d yr^-1. The long-term period decrease could be explained by mass transfer from the more-massive component to the less-massive one. By combining our photometric solutions with data from Gaia DR_2, absolute parameters were derived as M_1 = 1.20 M⊙, M_2 = 0.23 M⊙, R_1 = 1.36 R⊙and R_2 = 0.66 R⊙. The long-term period decrease and intermediate-contact configuration suggest that V1853 Ori will evolve into a high fill-out overcontact binary.     

移动扫描系统在1∶2 000地形图成果检验中的应用

基于移动扫描系统提出一套新的1∶2 000地形图检验流程,通过与全站仪、RTK等传统数学精度检验方式,论证移动扫描系统三维点云数学精度对于1∶2 000地形图精度检测的适用性。通过与传统人工外业巡视等传统地理精度检验方式,对比、分析全景影像对于地理精度检测的辅助作用。实验结果表明,移动扫描系统的三维点云数据数学精度符合1∶2 000地形图测绘成果质量精度检测要求,以全景影像辅助地理精度检查一定程度降低外业检验时长。因此,将移动扫描系统运用于1∶2 000等大比例尺地形图成果质量检验工作能一定程度优化检验流程、提升质检效率,为测绘成果质量检验工作提供新思路。     

1：100万图号中行号、列号正误的快速判断方法

针对多个县(市)、区土地调查文字材料将1:100万图号中的行、列号用错而产生严重缺陷的事实,本人认真学习了"国家基本比例尺地形图分幅和编号"的基础知识,并总结归纳出简易的快速判断正误的方法,以杜绝类似差错的发生.     

1:5万区域化探样品分析测试的质量监控

依据《地质矿产实验室测试质量管理规范》,并结合山西省的地质情况建立了一套1:5万区域化探样品分析测试的质量监控体系。分四个部分详细论述了的1:5万区域化探样品分析测试的质量监控体系。过去1:5万质量监控体系完全是靠人工进行,效率低下;本质量监控体系与过去相比,不但节省了大量的人力、物力,而且更加准确、迅速,更能适应1:5万质量监控大量数据处理的需要。     

1:25万斯诺乌山幅、狮泉河幅地质调查成果与进展

地层方面,在测区札达陆块厘定出念青唐古拉岩群;在措勤-申扎地层分区发现坚扎弄组在测区的存在,新建淌那勒组;将则弄群火山岩解体;根据化石,则弄群弧火山岩的形成时间为早白垩世;确认狮泉河蛇混岩带的形成时间是晚侏罗世—早白垩世;将才里群解体。岩石方面,在测区不同时代地层中发现火山岩系,填绘出了一系列火山机构;将中新生代深成侵入岩划分为拉轨岗日花岗岩带和冈底斯花岗岩带两个岩浆带;发现浆混岩系。构造方面,发现雅鲁藏布江结合带南北支在图区的存在;证实狮泉河带内存在洋脊蛇绿岩套,狮泉河带存在俯冲;确认班-怒带的南支向北与狮泉河带斜接。     

1:25万帕度错幅、昂达尔错幅成果与进展

新建9个正式岩石地层单位、4个非正式地层单位;将上三叠统日干配错群解体为6个岩石地层单元;解体中上侏罗统雁石坪群;将色哇组分为三段;将班公湖-怒江带木嘎岗日群解体为4个岩石地层单元;在西藏首次发现(上三叠统姜钟组)纳拉菁耳羽叶;在羌塘盆地首次发现(下—中侏罗统色哇组)辐鳍鱼类化石;新建8个侵入岩填图单位,时代为晚侏罗世—新近纪末期;在班-怒结合带塔仁本一带首次发现了洋岛型玄武岩;新发现了一系列新生代岩浆岩;在班-怒带及南羌塘盆地中发现一些呈串珠状分布的小型斑岩体;发现班-怒带上时代最新的枕状玄武岩。     

1:25万毕节县幅、遵义市幅地质调查成果与进展

在毕节青场桐梓组顶部至石炭系中发现有大量的暴露构造现象;发现毕节地区中二叠世茅口期存在两条走向北北东、宽10~50km的“黑区带”;在威信县城第四系中发现大量象牙、牙齿及骨骼化石;在凤冈琊川、遵义茅坡及威信鱼井等新发现多个志留纪植物化石;对黔中隆起进行了研究。     

预应力管桩单桩竖向极限承载力分析

通过天津地区几例预应力管桩的静载荷试桩结果 ,分析天津地区预应力管桩单桩竖向极限承载力标准值的估算及与《建筑桩基技术规范》(JGJ 94— 94)和天津市《岩土工程技术规范》(DB 2 9— 2 0— 2 0 0 0 )的差别     

CO_2 Density-Raman Shift Relation Derived from Synthetic Inclusions in Fused Silica Capillaries and Its Application

Abstract: The densities of CO2 inclusions in minerals are commonly used to determine the crystallizing conditions of the host minerals. However, conventional microthermometry is difficult to apply for inclusions of small size (< 5–10 μm) or low density. Raman analysis is an alternative method for determining CO2 density, provided that the CO2 density–Raman shift relation is known. This study aims to establish this CO2 density–Raman shift relation by using CO2 inclusions synthesized in fused silica capillaries. By using this newly-developed synthetic technique, we formed pure CO2 inclusions, and their densities were determined by microthermometry. The Raman analysis showed that the relation between CO2 density (D in g/cm3) and the separations (Δ in cm?1) between the two main bands (i.e. Fermi diad bands) in CO2 Raman spectra can be represented by a cubic equation: D (g/cm3)=0.74203(?0.019Δ3+5.90332Δ2?610.79472Δ+21050.30165)?3.54278 (r2=0.99920). Our calculated D value for a given Δ is between those obtained from two previously-reported equations, which were derived from different experimental methods. An example was given in this study to demonstrate that the densities of natural CO2 inclusions that could not be derived from microthermometry could be determined by using our method.