北京市有机氯农药填图与风险评价

采用1个样/km2的密度、1个分析组合样/16km2的方法,对北京市784km2范围内的土壤、大气干湿沉降物、大气颗粒物中HCH、DDT的含量和空间分布特征进行有机氯农药填图.查明2000年北京市地表土壤HCH和DDT的平均含量分别为8.80±11.83ng/g、108.99±301.90ng/g.2006年大气干湿沉降物中HCH和DDT平均含量分别为10.09±9.60ng/g、12.99±13.51ng/g,HCH和DDT的年沉降通量分别为996.57±939.96g/a·km2、1291.53±1342.28g/a·km2.2006年大气颗粒物PM10和PM2.5中的HCH含量分别为0.294±0.205ng/m3和0.217±0.137ng/m3,DDT的平均含量分别为1.037±1.301ng/m3和0.522±0.773ng/m3,显著高于2002-2003年度大气颗粒物中HCH(PM100.01786ng/m3,PM250.01731ng/m3)和DDT(PM100.01672ng/m3,PM2.50.02353ng/m3)的含量,表明北京市或周边地区仍在使用含HCH和DDT化学成分的农药.以2000年北京地表土壤和2006年大气干湿沉降物中HCH和DDT的含量为基础,对2020年土壤中HCH和DDT的时空演变的预测显示,即使干湿沉降物中HCH和DDT的沉降通量每年以5%的速率递减,到2020年土壤中HCH和DDT的环境质量仍不能显著改善,而控制和削减北京及周边地区含HCH和DDT成分农药的使用将是改善北京地表土壤环境质量的关键措施.     

GALILEO系统局域完备性监测设计与实现

根据GALILEO系统局域完备性概念和网络RTK的基本理论,建立导航系统局域网络完备性监测理论和算法。算法主要包括网络系统完备性算法和用户完备性算法,内容包括网络误差模型的建立、插值算法的选择、误差改正数完备性指标的计算、完备性指标的验证和用户保护水平的计算等。仿真结果表明,采用网络RTK技术和完备性监测算法,飞机的平面保护水平和垂直保护水平均小于完备性告警门限值,可以满足飞机Ⅱ类和Ⅲ类精密进近的完备性要求,为卫星导航系统在民航中的应用提供完备性理论基础。     

初至层析静校正在复杂山地三维地震勘探中的应用

随着地形高差增大、地貌单元多变、近地表模型复杂,目前被广泛应用的初至折射静校正的精度已无法满足精细勘探的要求。初至层析静校正技术,由给定的初始模型进行正演,用射线追踪方法得到初始模型的初至波,利用该初至波和实际拾取的初至波进行比较,计算地表模型的修正量,反复迭代求得准确的地表模型。山西省国阳新能股份有限公司二矿390水平九采扩区地表标高940～1100m,地貌单元复杂,在对该区资料处理时,利用初至层析折射静校正,经9次迭代计算后,真实地刻划出近地表模型。在二种静校正技术对比中,初至折射静校正不但近地表模型精度低于层析折射静校正,而且其叠加剖面精细程度也远低于层析静校正,如在初至折射静校正叠加剖面同相轴上呈现的凹凸形态,在层析静校正叠加剖面并无显示,且后者剖面的信噪比也比前者明显提高。     

山区煤田地震勘探中静校正存在的问题及其改进方法

在山区或地表复杂地区进行地震勘探,采用基于地表一致性假设的静校正将会严重影响勘探效果,该影响主要源于地表一致性假设存在着不合理因素。如较高的低速带、巨厚的低速带、基岩裸露、地形起伏较大等。为分析一致性假设静校正偏差产生的原因及大小．构建一地形起伏、基岩出露的复杂模型,通过正演其射线路径,对比其时距曲线与理论时距曲线的差异,以及二者静校正量误差大小。模型分析证实该差异与偏移距、地震波穿透深度及基准面高程之间存在直接的联系,据此提出了改进方法,如浮动基准面校正及分块静校正等。理论模型和实际地震资料试算表明,使用改进的方法可有效改善地震时间刮面同相轴聚焦效果及连续性。     

中国短期气候变化的一个重要原因——青藏高原地表反射率的变化

通过数值试验对高原地表反射率变化的气候效应进行了敏感性研究,同时对观测的近４０年中国区域气候变化趋势作了对比分析。结果表明,高原主体地表反射率增加是我国短期气候变化的重要控制因子之一,它能造成东亚夏季风和高原夏季风的显著减弱,使夏季我国东部季风区北方变暖,南方变冷,季风降水普遍减少。     

基于短基线集InSAR技术监测北京地区地表形变

短基线集差分干涉测量(SBAS-InSAR)技术是在传统DInSAR技术基础上发展起来的一种更高精度的长时序变形监测方法,可有效地克服传统DInSAR在微小形变监测中受时空去相干以及大气效应等因素的影响,已成为当前InSAR技术的研究热点.本文利用ENVISAT ASAR传感器获取的22幅C波段影像数据,基于短基线集差分干涉测量技术对北京地区地表沉降进行监测,获取每个观测时刻的形变累积量,得到研究区的形变序列图,进而分析了该区域地表沉降特征,结合地质环境监测成果,初步讨论了2003至2010年间北京地区区域地表沉降成因.     

近50 a渭河流域洪水成因分析及防治对策

 通过对近50 a渭河流域洪水的年际变化、月际变化和潼关高程变化的综合分析得出，造成该流域洪水灾害的原因有降水量年内分配不均和年际变化大，滩面淤积加重，支流河口淤塞以及河势、流态的恶化等。针对这些原因，根据渭河流域洪水灾害的特点，提出了相应的防治措施，即降低下游高程，减少河道的淤积，增大河道泄洪能力；利用水库进行调水调沙，引进客水冲刷渭河下游；防洪工程要除险加固，提高防洪标准与抗洪能力；恢复林草植被，遏止水土流失，从源头上控制泥沙入河等。     

Permeable Reactive Barrier for the treatment of contaminated surface water in Katedan industrial development area, Hyderabad, India

Permeable Reactive Barrier （PRB） is an emplacement of inert material （s） in the subsurface, designed to intercept a contaminated plume, provides a preferential flow path through the reactive media, and transforms the contaminant into environmentally acceptable forms to attain concentration remediation goals at the discharge of the barrier. The phenomena, which help in remediation within PRB, are adsorption/sorption, precipitation, oxidation/reduction and biodegradation. Various materials like zero-valent iron, zero-valent bi-metals, natural zeolites, organic carbon, fly ash, zeolites, limestone, activated alumina, apatites, etc. have been tried by many researchers to remove organic and inorganic contaminants. In USA, Canada, and many European countries commercial full-scale and pilot scale PRBs are successfully working. The design and installation of full scale PRBs needs laboratory treatability and dynamic flow column experiments？ The concept of PRB is being applied to treat contaminated surface water in the Katedan industrial area, Hyderabad, India. National Geophysical Research Institute （NGRI）, Hyderabad, India, conducted systematic studies in collaboration with Norwegian Geotechnical Institute （NGI）, Norway, to develop PRB technique to decontaminate the surface water pollution due to industrial effluent. A site assessment study in the Katedan Industrial Area, were carried out and water, soil and sediment from the lakes of the area were found to be polluted with high concentrations of heavy metals like As, Pb, Cr, Cd, Ni, etc. Adsorption studies at NGRI with synthetic samples and in-situ industrial effluent using different reactive media for removing contaminants like arsenic, chromium, cadmium, copper, nickel, lead and zinc have been carried out and yielded satisfactory results. The performance of zero-valent iron and limestone is encouraging in removing As,     

Factors controlling the spatial and temporal variability of dust emissions

New field measurement techniques are allowing researchers to better understand how surficial properties affect the temporal and spatial variability of dust emissions. In this paper we review the current understanding of the dust emission process and present new field measurements that examine how three surface properties： roughness, crust strength, and temporal changes of surface properties affect dust emissions. These data were collected using three unique measurement systems developed by our team. Roughness exerts considerable control on the entrainment threshold and emissions of dust from a surface. We have carried out a series of experiments designed to quantify roughness effects on aeolian sediment entrainment and transport in a shear stress partitioning framework. Our results show that the model of Raupach et al. （1993） provides very good agreement with available data to predict the amount of shearing stress on the intervening surface among roughness elements, relatively independent of their size and distribution. However, element size affects the aeolian sediment transport process beyond that attributable only to the reduction of surface shear stress caused by the roughness. Additional interactions of the elements with the saltation cloud appear to reduce the transport efficiency and potentially dust emissions as well. The effect of crust strength on dust emissions was assessed using a newly-developed pin penetrometer, which can measure crust strength in-situ. Previous researchers suggested that variation in crust strength even within a small area could lead to considerable spatial variability in dust emissions. Our measurements showed that crust strength is highly variable over a scale of centimeters. This variability may help to explain some of the observed scatter in field measurements of dust emissions for what appear to be homogeneous surfaces. Variability of dust emissions in time and space was also evaluated using a new instrument, the Portable In-Situ Wind Erosion Lab （PI-SWERL） developed to measure dust emissions from soil surfaces.     

初至折射波静校正技术在复杂探区地震数据处理中的应用

山区及黄土塬地区近地表结构复杂，地形起伏大、低降速带横向变化剧烈，地震资料处理中的静校正难度加大。长波长静校正容易引起构造形态畸变，短波长静校正影响地震剖面信噪比。针对此类问题，从长波长静校正问题及短波长地表非一致性问题分析入手，提出部分炮检距叠加识别长波长静校正技术及分段统计逼近地表非一致性校正技术。该技术在复杂地表区与其它相关技术综合应用，可有效解决长、短波长静校正问题。