线性偏振光激发的错位表面等离子体激元纳米结构聚焦

利用扫描近场光学显微镜观测并分析了两种表面等离子体激元纳米结构对表面等离子体激元(SPP)的激发和聚焦现象. 用线偏振光照射有半个周期相位差的环状沟槽结构与有半个周期位相差的环状狭缝结构,得到了单点的SPP聚焦. 有限时域差分法的模拟结果验证了实验中观测的现象. 这两种相位错位的表面等离子体激元纳米结构,突破了由于干涉导致的线偏振光不能得到单个聚焦点的限制. 与采用径向偏振光激发而得到单个聚焦点的方法相比,线偏振光不需要聚焦,也不需要将光束中心对准纳米结构的几何中心即可得到单点聚焦.     

Nd:YAG纳秒激光诱导硅表面微结构的演化

利用Nd:YAG纳秒激光(波长为532和355 nm)对单晶硅在真空中进行了累积脉冲辐照,研究了表面微结构的演化情况.在激光辐照的初始阶段,532和355 nm激光脉冲均在硅表面诱导出了波纹结构,后者辐照硅表面后形成了近似同心但稍显混乱的环形波纹结构.随着脉冲数的增加,波纹结构逐渐演化为一种类似珠形的凹凸结构,最后形成准规则排列的微米量级锥形结构,该微结构的生长依赖于表面张力波和结构自组织.分析发现,形成的交叉环形结构主要是在355 nm激光辐照硅的过程中,表面张力波导致波纹结构部分叠加的结果.     

自动表面船用于岛礁水深测绘

岛礁具有重要的地位,然而对其附近水深的调查手段却不充分。比较了几种水深测绘手段的优缺点,设计了一种小型自动表面船用于岛礁水深测绘。该表面船底部安装声学测深仪,具备自动定位、导航与运动功能;其尾部安装两个电动推进器提供动力,通过独立控制两个推进器的转速,可实现船体的前进、后退和转向;利用无线电与岸基单元进行数据通讯。根据不同水深测绘条件,该船可以用三种控制方式进行水深测量:直接控制、间接控制和自主控制。测量数据实时传输到岸基单元,并自动存储于船载存储单元。初步试验结果表明,设计的自动表面船测量系统具有可行性。     

Li/Fe摩尔比和表面活性剂浓度对水热合成α-LiFeO2的影响

以α-FeOOH、LiOH·H2O、十六烷基三甲基溴化铵(CTAB)和十二烷基苯磺酸钠(SDBS)为原料,采用水热法合成了α-LiFeO2粉体,利用X射线衍射仪(XRD)、冷场发射扫描电子显微镜(SEM)对粉体的物相和微观形貌进行了表征,研究了不同Li/Fe摩尔比及CTAB浓度对α-LiFeO2物相形成和微观形貌的影响.结果表明:当Li/Fe摩尔比为30:1,反应温度为210℃,反应时间为6 h时,可得到纯相α-LiFeO2,随着Li/Fe摩尔比的减少,有杂相α-Fe2O3和Li0.5Fe2.5O4生成;表面活性剂CTAB和SDBS对水热合成α-LiFeO2的物相组成没有影响,但对其微观形貌的影响较大.其中,CTAB主要起到了控制粉体粒径大小的作用,而SDBS除了降低粉体粒径外,还影响到了粉体的微观形貌.随着体系SDBS浓度的增大.粉体经历了多面体、层状和类球形3种形貌,并且平均尺寸降至0.3μm左右.     

基于加权约束的单体建筑物点云表面重建算法

建筑物点云表面重建在高精度城市测绘、虚拟现实等领域有十分广泛的应用前景。由于建筑物的几何形态多变,重建算法普遍存在计算速率慢、拟合精度低和模型结构不完整的问题。为此,本文以单体建筑物为研究对象,提出基于加权约束的单体建筑物点云表面重建算法,在表面初始化过程中充分考虑数据对结构拟合的贡献。在此基础上,构建基于正则集的单体建筑物表面重建算法,实现建筑物拟合过程中的加权拟合误差、近邻结构平滑的同步优化。针对多类建筑物三维点云的实验结果表明,相比传统的建筑物重建策略,本文的加权约束方法可根据不同类型的点云数据设计自适应权重,并选择模型拟合中最优的权重函数,在高噪声、低精度点云数据下能得到更高精度的单体建筑物表面模型。     

Nonlinear numerical simulation on extreme-wave kinematics

A fully nonlinear numerical model based on a time-domain higher-order boundary element method (HOBEM) is founded to simulate the kinematics of extreme waves. In the model, the fully nonlinear free surface boundary conditions are satisfied and a semi-mixed Euler-Lagrange method is used to track free surface; a fourth-order Runga-Kutta technique is adopted to refresh the wave elevation and velocity potential on the free surface at each time step; an image Green function is used in the numerical wave tank so that the integrations on the lateral surfaces and bottom are excluded. The extreme waves are generated by the method of wave focusing. The physical experiments are carried out in a wave flume. On the horizontal velocity of the measured point, numerical solutions agree well with experimental results. The characteristics of the nonlinear extreme-wave kinematics and the velocity distribution are studied here.     

Numerical Prediction of Induced Pressure and Lift of the Planing Surfaces

This paper discusses the numerical prediction of the induced pressure and lift of the planing surfaces in a steady motion based on the potential flow solver as well as the spray drag by use of the practical method.The numerical method for computation of the induced pressure and lift is potential-based boundary element method.Special technique is identified to present upwash geometry and to determine the spray drag.Numerical results of a planing flat plate and planing craft model 4666 are presented.It is shown that the method is robust and efficient and the results agree well with the experimental measurements with various Froude humors.     

The effect of current and wave on whitecap coverage via relative speed： the Atlantic Ocean case

Whitecapping plays an important role in many air-sea exchange and upper ocean processes. Traditionally, whitecap coverage is parameterized as a function of wind speed only. At present, the relative speed of ocean current to wind is considered to be important in the air-sea exchange parameterization which is the function of wind speed only. In this paper, the effects of ocean surface velocity (current velocity and wave induced velocity) and the wave parameters on whitecap coverage through relative speeds are investigated, by applying a 2-parameter whitecap coverage model to the Atlantic Ocean. It is found that the impacts of both current and wave on whitecap coverage are considerable in the most part of the Atlantic Ocean. It is interesting that the effect of wave is more significant than that of current.     

Isolation and identification of bacteria associated with the surfaces of several algal species

We conducted this study to assess the diversity of bacteria associated with the surfaces of algae based on 16S rDNA sequence analyses.Twelve strains of bacteria were obtained from the surfaces of the following four species of algae:Gracilaria textorii,Ulva pertusa,Laminaria japonica,and Polysiphonia urceolata.The isolated strains of bacteria can be divided into two groups:Halomonas and Vibrio,in physiology,biochemical characteristics and 16S rDNA sequence analyses.The phylogenetic tree constructed based on ...