高温超高压下Ni40Mn30Fe30与叶蜡石反应的研究

本文对Ｎｉ４０Ｍｎ３０Ｆｅ３０合金与在不同焙烧温度下得到的含水叶蜡，在高温超高压下的反应进行了实验研究，温度测至１４２０℃，压是至５．５ＧＰａ，研究了该反应的物质－化学机制，以及反应速率与温度，压力，含水量等参数的关系，对高压下物质迁移运动的固有特征进行了探讨。     

A Study on the Geological—Geochemical Dynamics of Hydrothermal Ore Deposition as Exemplified by the Muping—Rushan Gold Deposit Belt,Eastern Shandong,China

This paper presents a method of establishing a hydrothermal ore-forming reaction system.On the basis of the study of four typical hydrothermal deposits,the following conclusions concerning geochemical dynamic controlling during hydrothermal mineralization have been sions concerning geochemical dynaamic controlling during hydrothermal mineralization have been drawn:(1)The regional tectonic activities control the concentration and dispersion of elements in the ore-forming process in terms of their effects on the thermodynamic nature and conditions of the ore-forming reaction system.(2)During hydrothermal mineralization the activites of ore-bearing faults can be divideb into two stages:the brittle splitting stage and the brittle-tough tensing stage,which would create characteristically different geodynamic conditions for the geochemical thermodynamic ore-forming system.(3)The hydrothermal ore-forming reaaction system is an open dynamic system.At the brittle splitting stage the system was so strongly supersaturated and unequilibrated as to speed up and enhance the crystallization and differentiation of ore-forming fluids.And at the brittle-tough tensing stage,the ore-forming system was in a weak supersaturated state;with decreasing temperature and pressure the crystallization of oreforming material would show down,and it can be regarded as an equilibrated state.(4)In the lates stages of hydrothermal evolution,gold would be concentrated in the residual ore-forming solution.The pulsating fracture activite in this stage led to the crush of pyrite ore and it was then filled with gold-enriched solution,forming high-grage“fissure”gold ore.This ore-forming process could be called the coupling mechanism of ore formation.     

地震CT及其地质解释

在金川公司龙首矿东采区1 280中段井下500m深的巷道中应用地震CT技术进行寻找深部隐伏矿体的实验。波速图像表明,研究区内中西部有一高速异常区,推断为花岗岩体和含矿的超基性侵入岩体。区内还有一个横贯测区中央近东西走向的低速断裂带。这些推断结果为后期的钻探和巷道开掘所证明。     

谈调整构造

调整构造是伸展型沉积盆地和造山带中普遍存在的构造,它与走向构造一起,控制了沉积盆地或造山带的基本轮廓与内部结构。调整构造横切走向构造,并与之共同控盆、控岩、控矿,并间隔开两侧不同的构造样式。它以长时期、多阶段活动,具有高渗透性为主要特征,是控制矿带展布与矿床就位的重要构造,也是固定成矿预测区与找矿靶区的重要依据之一,本文以鲁西、中亚及乌拉山-大青山地区、兰坪─思茅盆地区及右江盆地区为例,论述了调整构造的基本特征及控矿作用。     

华北石炭——二叠纪煤系粘土岩夹矸中铝的氢氧化物矿物研究

华北石炭——二叠纪煤系太原组和山西组不同煤层粘土岩夹矸中,广泛含有一水软铝石、一水硬铝石和三水铝石。大多数一水铝石矿物呈薄纹层状、似层状及层状聚集于富岩质及富有有机质粘土岩夹矸条带中,有的呈细脉状沿炭质条带及粘土岩夹矸层理的节理裂隙分布,并与玉髓、方解石、高岭石或迪开石和铵云母细脉共生。铝的氢氧化物矿物可以作为成岩古温度和成岩阶段划分的标志矿物。最后还讨论了该矿物的成因。     

中国南方砂（页）岩铜矿床硫同位素地球化学研究

以中国南方著名的滇中和会理盆地砂页岩铜矿床宏观地质特征和硫同位素分析数据为基础，系统地研究了我国南方砂页岩铜矿床硫同位素组成特征。首次用筛分模式、分馏效应对硫同位素总体进行筛分，结果表明硫主要有三个来源：有机质分解或还原硫酸盐，占１１．３％，地上水，占４２．５％，热卤水，占４６．２％，本研究为该类型矿床的成因，成矿地球化学环境及指导区域找矿勘探等提供了重要依据。     

岩背矿床成矿地质条件及构造复合控岩控矿特征

岩背锡矿田内上侏罗统厚层状流纹质碎斑熔岩为重要赋矿层位；燕山晚期高位侵入花岗杂岩，具有多次成岩与多次成矿特征；多组断裂的构造复合控岩控矿较为普遍。