热液脉动与岩浆涌动控制机理浅论

热液脉动与岩浆涌动的控制机理,是基础地质理论所涉及的两个重要议题。本文首先对当今流行的构造控制机理提出了质疑,其后借助＂间歇喷泉＂原理和＂吹气球＂机制,分别对热浪的脉动和岩浆的涌动进行了必要的探讨。     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

无人机倾斜摄影三维建模技术及认识

结合实践对无人机倾斜摄影三维建模技术从技术简介、所带来的技术变革、精度评价和三维模型特征、全新生产流程成果形式以及6D标准测绘产品、不利因素影响下的倾斜摄影三维建模问题、倾斜摄影测量三维建模技术应用以及需要进一步研究和解决的问题进行了梳理和总结,提高了对无人机倾斜摄影三维建模技术的认识,有利于无人机倾斜摄影三维建模技术在生产中的进一步推广应用.     

岩溶区集中式饮用水源地水质评价与保护——以毕节市倒天河水库和利民水库为例

采用SPSS软件，对2003年01月至2004年12月期间，倒天河水库和利民水库逐月水质监测数据进行数理统计分析，结果表明毕节市饮用水水质污染有较明显的季节变化和空间差异；且不同污染物对水体污染的贡献率各不相同，总磷和粪大肠菌群所占份额最大，方差累积贡献率达77％。在此基础上，利用加权综合污染指数对水体水质污染现状进行综合评价，结果显示倒天河水库和利民水库，水质污染总体较轻．饮用水水质符合《地表水环境质量标准（GB3838—2002）》中Ⅲ类水质标准；最后提出加大水环境保护的建议。     

论四川盆地三叠系地下水水文地质条件

四川盆地三叠系地下水可划分出碎屑岩孔隙裂隙和碳酸盐岩岩溶裂隙两大储集类型。按此处构造开启程度和埋深条件等的不同,下中三叠统地下水有沉积变质水和渗入淋滤水两种基本成因类型,水动力特征各异。沉积变质水处于深埋封闭条件,受地静压力驱动控制;渗入淋滤水分布于背斜露头区和浅部地区,受静水压力驱动控制。并由此控制了盆地三叠系盐类的保存条件。     

陕西省水工程勘察规划研究院

陕西省水工程勘察规划研究院始建于一九四九年。长期以来承担着全省地下水监测研究、地下水盗源调查评价、地下水开发利用规划、钻井技术设备研究、科技推广等专业按术工作和机井工程建设监督、质量管理，钻井施工资质管理等行业技术管理工作。具有国家甲级水文水资源调查评价、建设项目水资源论证、水文地质勘察、岩土工程资质．     

Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.     

Geochemistry of porewater and sulfate-reducing bacteria in sediment cores from the Chianan Plain, Taiwan

High concentrations of arsenic and humic substances in groundwater from the southwestern coastal plain of Taiwan were well known for their probable relationships with black-foot disease. In order to realize the relationships between the concentrations of humic substances and arsenic in this area, 24 well water samples were analyzed. After filtered through 0.45 μm glass fiber membrane in the field, samples were kept in the dark at 4℃ and then separated into six fractions with varying range of molecular weight （〈0.5, 0.5-1, 1-5, 5-10, 10-50 and 〉50 k Da） by ultrafiltration apparatus （Molecular/Por Stirred Cell system） in the lab. Concentrations of humic substances were measured by fluorescence spectrometer （HITACHI F-2000, ex=370, em=445） and arsenic by FIAS-AA （Perkin Elmer AAnalyst 100, FIAS-400）. On average, only 6.2% of the total arsenic in water existed in the fraction of 〉0.5 k Da. and the others were complexed with humic substances （including humic acid and fulvic acid）. The results demonstrated a distinct positive correlation between the concentrations of humic substances and arsenic.     

Possibility of degradation of phenylarsonic acid in the presence of ferrihydrite

Although inorganic species are predominant in natural systems, but there are many kinds of organoarsenic species such as methylated and phenylated arsenic compounds. Phenylarsonic acid （PA） is a degradation product of organoarsenics used for chemical warfare agents, which has been detected in well water at the disposal site of the agents in Japan. There are few reports studying behavior of PA in soil. In this study, PA was adsorbed onto ferrihydrite and its chemical forms were determined using high performance liquid chromatography connected to inductivity-coupled plasma mass spectrometry （HPLC-ICP-MS）. 100 mg/kg of PA was mixed with 0.03 g of 2-line ferrihydrite. For each suspension, pH was adjusted by HNO3 or NaOH. Each sample was incubated for more than 19 hours and the final pH was measured. After filtration, the chemical form of arsenic in the filtrate was measured using HPLC-ICP-MS. In addition, ferrihydrite separated by filtration was dissolved by 3 ml of 0.5 M HCI and the arsenic species in the solution was detected by HPLC-ICP-MS （column： Tosoh TSKgel SuperlC-AP, eluent： 0.01 M HNO3）. It was verified that PA is not degraded by heating in 0.5 M HCl solution. At pH 3.1, any arsenic compounds were not detected from the solution, because almost all arsenic species were adsorbed onto ferrihydrite at lower pH. At pH= 12, however, 7%-10% of inorganic arsenic was detected in the solution. In solid phase, there are some problems to determine the precise ratio of inorganic and organic species. When the solution includes Fe ion at 0.01 M level, the retention time of arsenic species drifted compared to those in standard solution, which makes it difficult to determine precisely the arsenic species adsorbed on ferrihydrite. Therefore, more study is needed to determine the ratio of inorganic and organic species in the system.     

Treatment of high fluoride concentration wastewater by layered double hydroxides： Mechanism studies

An appropriate concentration of fluoride in drinking water is required to prevent dental cavities, but long-term ingestion of water that contains more than a suitable level of fluoride can cause bone disease and mottling of the teeth. Fluoride ions can be found in wastewater from the fluoride chemical industry, as well as the semiconductor, metal processing, fertilizer, and glass-manufacturing industries. The discharge standard for fluoride in industrial wastewater in China is 10 mg/L. Efficient treatment of fluoride-containing wastewater is therefore of major concern in China, following the rapid development of the fluoride chemical industry. Several methods have been used to remove fluoride from water, such as adsorption, chemical precipitation, electrodialysis, ion exchange and electrochemical processes. Layered double hydroxides （LDHs） are anionic clays with high anion exchange capacities which are effective adsorbents for removal of a variety of anionic pollutants. LDHs have been studied as potential adsorbents for removing toxic anionic species such as CrO4^2-, TcO4^-, SeO3^2-, pesticides, and anionic surfactants from aqueous systems. One of the main attractions of using LDHs for fluoride removal, is that unlike other chemical treatment methods, no chemical sludge should be produced. In the present study, an attempt was made to investigate the mechanism of fluoride removal by LDHs under different conditions using batch methods. In addition, the release of fluoride adsorbed on LDHs by treatment with an aqueous solution of Na2CO3 was studied. The residual fluoride was found to be 10 mg/L in a solution with an initial concentration of 1000 mg/L, which meets the discharge standard for fluoride in industrial wastewater in China.