Carbon and oxygen isotopic composition of car- bonate cements of different phases in terrigenous siliciclastic reservoirs and significance for their origin： A case study from sandstones of the Triassic Yanchang Formation, southwestern Ordos Basin, China

Early carbonate cements in the Yanchang Formation sandstones are composed mainly of calcite with relatively heavier carbon isotope （their δ^18O values range from -0.3‰- -0.1‰） and lighter oxygen isotope （their δ^18O values range from -22.1‰- -19.5‰）. Generally, they are closely related to the direct precipitation of oversaturated calcium carbonate from alkaline lake water. This kind of cementation plays an important role in enhancing the anti-compaction ability of sandstones, preserving intragranular volume and providing the mass basis for later disso- lution caused by acidic fluid flow to produce secondary porosity. Ferriferous calcites are characterized by relatively light carbon isotope with δ^13C values ranging from -8.02‰ to -3.23‰, and lighter oxygen isotope with δ^18O values ranging from -22.9‰ to -19.7‰, which is obviously related to the decarboxylation of organic matter during the late period of early diagenesis to the early period of late diagenesis. As the mid-late diagenetic products, ferriferous cal- cites in the study area are considered as the characteristic authigenic minerals for indicating large-scaled hydrocarbon influx and migration within the clastic reservoir. The late ankerite is relatively heavy in carbon isotope with δ^13C values ranging from -1.92‰ to -0.84‰, and shows a wide range of variations in oxygen isotopic composition, with δ^18O values ranging from -20.5‰ to -12.6‰. They are believed to have nothing to do with decarboxylation, but the previously formed marine carbonate rock fragments may serve as the chief carbon source for their precipitation, and the alkaline diagenetic environment at the mid-late stage would promote this process.     

Environmental Redox Changes of the Ancient Sea in the Yangtze Area during the Ordo-Silurian Transition

Extensive organic-matter （OM） rich facies （black shales） occur in the Ordo-Silurian boundary successions in the Yangtze area, South China. To investigate the redox changes of the Yangtze Sea during the Ordo-Silurian transition, two OM sections （Wangjiawan in Yichang, Hubei Province, and Sanjiaguan in Zhangjiajie, Hunan Province） straddling the Ordo-Silurian boundary are studied. The measurements finished in this study include contents of the total organic carbon （TOC）, pyrite sulphur, and different species of Fe, including dithionite-extractable Fe （FED）, pyrite Fe （FeP）, HCl-extractable Fe （FeH）, and total Fe （FeT）, in black shales, as well as other redox proxies, such as the SIC ratio, the ratio between highly reactive Fe （FeHR = FeD ＋ FeP） and FeT, and the FeP/（FeP ＋ FeH） ratio, known as the degree of pyritization （DOP）. In the Wangjiawan section, the Middle Ashgill sediments have high FeHR/FeT ratios （0.20-0.77; avg. 0.45）, high DOP values （0.21-0.72; avg. 0.54）, and a relatively constant sulfur content independent of the organic carbon content. By the contrast, the mid-early Hirnantian deposits generally have low FeHR/FeT ratios （0.10-0.35; avg. 0.21）, low DOP values （0.11- 0.40; avg. 0.28）, and SIC values are clustering on the normal marine value （SIC = 0.36）. The late Hirnantian and early Rhuddanian deposits, similar to those of the Middle Ashgill deposits, are characterized by high FeHR/FeT ratios （0.32-0.49; avg. 0.41）, high DOP values （0.46-0.68; avg. 0.53） and fairly constant sulfur contents. These data suggest the occurrences of marine anoxia on the Yangtze Sea shelf during intervals of the Mid Ashgill, Late Hirnantian and Early Rhuddanian, and ventilated and oxygenated marine conditions during the mid-early Hirnantian time. The mid-early Hirnantian ventilated event was concomitant with the global glacial period, likely resulted from the glacio-eustatic sea-level fall and subsequent circulation of cold, dense oxygenated waters     

川西坳陷中段天然气碳同位素特征及其成因类型

川西坳陷中段天然气的组份以烃类气体为主,占气体总体积的98.1%～99.7%;非烃气体以CO,2和N2为主,其含量分别占气体的0.12%～1.32%和0.25%～1.54%;烃类气体中以甲烷占绝对优势,平均含量为95.83%;重烃含量较低,平均为3.21%;干燥系数(C1/C,1-5>)平均为0.97,整体上属典型的干气.川西坳陷中段的所有样品δ13C,2都大于-25.8‰,属于典型的煤型气范畴,天然气的δ13C,1δ'13C,2δ13C,3,呈明显的正序排列,显示出天然气为典型的有机成因.甲烷碳同位素组成,反映了其母质演化程度已处于成熟～高成熟阶段,且以高成熟阶段为主.     

基于SVM的多源遥感影像面向对象建筑物提取方法

在分析支持向量机(Support Vector Machine,SVM)分类技术和机载激光雷达(LIDAR)数据、航空影像特征的基础上,提出了基于SVM的LIDAR数据和航空影像的面向对象建筑物提取方法。结果表明,该方法充分利用了多源影像的互补信息,能够得到更高的信息提取精度,准确而快速地更新地理空间数据库,是一种有效的面向对象建筑物提取方法。     

玉米冠层FPAR的高光谱遥感估算研-基于PCA方法及近、短波红外波段

光合有效辐射分量(Fraction of Photosynthetically Active Radiation,FPAR)是进行生态系统功能和全球变化研究的重要参数,准确估算FPAR具有重要意义。通过对野外实测玉米高光谱数据和光合有效辐射数据的分析,探讨了主成分分析方法在高光谱信息提取及估算玉米冠层FPAR参数方面的可行性,在此基础上,结合植被指数验证FPAR估算效果,分析近红外及短波红外高光谱数据在FPAR估算方面的应用潜力。     

基于GIS的北京市生态环境质量监测与分析

以2006年TM、SPOT 4及QuickBird遥感影像为信息源,在地理信息系统与遥感技术的支持下,结合野外调查及其它辅助数据,运用生态环境状况评价技术规范,对北京市2006年的生态环境质量进行评价,并对2000年与2006年北京市生态环境变化进行动态分析.结果表明: 2006年北京市生态环境质量评价指数为59.707,处于良好等级;2000～2006年间,北京全市生态环境状况稳定保持在"良"的状态,总体变化不大,但北京市耕地面积减少了339.09 km2,城镇建设用地增加了285.24 km2,水域面积减少了118.98 km2,其主要原因是降水量的减少、城市化扩张以及人为因素影响.     

电离层电子浓度总含量梯度对GPS差分定位精度的影响

针对GPS定位测量的信号传播路径误差,分析了电离层电子浓度总含量梯度对差分定位精度的影响,利用L1载波重点讨论了1999年-2000年太阳活动期间低纬度赤道异常地区GPS差分定位精度的问题,同时验证对于长基线采用GPS广域差分技术可以使电离层定位误差得到明显提高。     

二三维联动的虚拟校园设计与实现

传统的2维地理信息系统技术成熟但缺乏3维可视化和分析的能力,而目前的3维地理信息系统发展可拥有3维可视化分析能力,然而还缺少2维地理信息系统的便捷。以二三维联动为开发思路的地理信息系统能够解决这对矛盾。本文基于二三维联动GIS的设计方案,以虚拟校园设计与实现为应用实例,利用ArcEngine（AE）实现二三维联动GIS系统的开发设计,对GIS系统的开发做出了一种新的、有益的尝试。     

基于多基站网络的VRS差分改正信息的方法分析

基于虚拟参考站VRS(Virtual Reference Stations)的GPS测量技术是近几年应用在网络RTK中的热门技术,文中首先介绍VRS的基本原理,然后利用站际星际二次差分技术,推导虚拟观测值,最后讨论研究虚拟参考站的双差改正数的内插算法。     

基于不同GCP数量和获取方法的数字正射影像的制作与评定

SPOT-5影像的高分辨率和高信息量的性质,使其得到了广泛的应用,特别是在全国第二次土地利用调查中得到了更加深入的应用。而数字正射影像的制作是SPOT-5遥感影像应用的关键所在。本文在介绍DOM制作的基础上,依据当前获取GCP主要的三种途径采用ERDAS遥感图像处理软件进行了实验,并对最终的结果精度进行分析,总结了DOM制作过程的相关问题。