盆地岩石圈结构与油气成藏及分布

本文综述了大陆岩石圈研究现状和克拉通盆地、裂谷盆地和前陆盆地的岩石圈结构特征,指出在古裂谷、褶皱带或区域性深断裂等陆壳构造薄弱带上发育起来的多期叠合盆地,具有很好的含油气前景。大型含油气盆地往往存在地幔上隆、地壳减薄和地壳内低速层,盆地基底沉降与盖层沉积厚度较大。适度的后期构造活动改造和岩浆活动有利于沉积盆地内油气生成与保存。     

韧性剪切带的变形变质与同构造熔融作用——以中祁连地块宝库河韧性走滑剪切带为例

宝库河韧性剪切带是发育在中祁连地块北缘上的一条向北陡倾,走向近东西,宽约6 km的右行平移型韧性剪切带.剪切带内岩石原岩为泥质岩、基性岩和花岗岩,变质程度达角闪岩相,变形变质温度在685～763±46℃之间,压力在0.62～0.83±0.13 GPa范围内.其内长英质条带非常发育,规模变化较大,分布局部相对集中且受剪切带控制,走向与剪切带一致,平行于叶理,孤立无根,并在后期递进变形过程中发生不同程度的糜棱岩化、布丁化和褶皱,主要成分为长石和石英,明显不同于韧性剪切前或后侵入的花岗岩脉或岩体.长英质条带特征、REE配分模式及剪切带内岩石的变形变质温度说明剪切带内发育的长英质条带与基体是同源的,是在剪切应变过程中剪切热使围岩内部分物质发生动态熔融形成的,是同构造熔融作用的产物.     

吐哈盆地中央构造带正反转演化特征

吐哈盆地中央构造带由火焰山构造和七克台构造组成。中央构造带形成于三叠纪晚期至侏罗纪早期,表现为伸展构造特征,生长断层上盘地层厚度明显大于下盘,并于断层上盘所在的台北凹陷形成沉降中心。晚侏罗世,由于拉萨陆块与欧亚大陆的碰撞作用导致吐哈盆地由伸展盆地转变为挤压盆地,中央构造带也于此时发生构造反转,由早期的伸展正断层转变为挤压逆断层。发生于55Ma的喜山构造事件对天山地区产生了深刻的影响,但影响时间略有滞后,大致发生在晚渐新世至早中新世,中央构造带即在此次构造事件中强烈变形,逆冲出露于地表。     

东亚陆缘带构造扩张的深部热力学机制

近年来,我国地球科学家提出“陆缘构造扩张”观点,较好的解释了亚洲东部大陆边缘于新生代发生扩张离散运动的原因。本文基于“陆缘构造扩张”观点,探讨东亚陆缘带构造扩张的深部热力学机制。东亚陆缘带是具有强烈岩浆活动和构造变形的扩张带,此构造带的主要地球物理特征是频繁的地震活动和明显的地热异常。东亚陆缘扩张带地震层析成像显示,太平洋板块低角度俯冲到欧亚板块之下并平卧于670km相变界面之上。这种图像可能是俯冲后撤导致陆缘扩张的结果。热模拟及地球动力学计算表明:俯冲后撤时间距今约76Ma,海沟带后撤为陆缘壳体的生长留下空间,并形成东亚陆缘壳体增生扩展的前沿带,陆缘扩张量约700km。     

东天山北麓2000多年以来的森林线与环境变化

依据吉木萨尔县泉子街乡桦树窝子和小西沟两个剖面进行高时间分辨率的孢粉分析，结合剖面岩性特征分析、历史文献记录和碳屑鉴定，揭示了天山北麓最近2000多年以来的环境变化。2000aB．P．以前，该地植被为荒漠草原；2000-1300aB．P．(50a B．C．-650A．D．)，植被为草原植被，其中1750—1400aB．P．(200—550A．D．)，植被为有少量森林的草原植被，当时气候状况较今凉湿，适宜云杉生长，使得云杉林带下移，幅度可达250m左右。当时的年均气温较今低1℃而降水量较高，是新疆历史上一个相对冷湿的环境；约1300—450a B．P．(650—1500A．D．)，植被为荒漠草原；4．50aB．P．年以来，植被为荒漠草原—草原。     

再论中国西部逆冲滑脱拆离断层前锋带的构造样式——兼论其与油气的关系

逆冲拆离断层系统又称薄皮构造，一般可分为根带、中带、前锋带及外缘带四个部分。其前锋带又可划分出滑脱型、褶皱型、前冲型和反冲型等几类构造样式，各类构造样式还可再分成若干种。例举了各种中国西部存在的典型构造样式。在库车盆地还发现双重滑脱逆冲拆离断层前锋构造存在，在其他盆地仅发现单层逆冲拆离断层前锋带的构造样式。逆冲滑脱拆离断层前锋带构造环境中油气丰富(典型的如克拉2气田)，具有良好的勘探前景。     

沉管施工技术在常洪隧道中的应用

文章针对沉管隧道施工特点，介绍了宁波常洪隧道干坞施工和沉管制作中的施工技术，并对后浇带、端钢壳、GINA止水带、钢压载水箱等相关施工工艺与施工技术作了阐述。     

STRUCTURAL CHARACTERISTICS OF THE NIUSHOU MOUNTAIN AND ITS GEOLOGICAL SIGNIFICANCE IN CENTRAL NINGXIA

There are many thrust-related structures occurring in the Paleozoic strata of the Niushou Mountain in the central part of Ningxia Hui Autonomous Region. The fault-related folds are the typical structures in this area. Based on the analysis about these structures and their relationships, the processes by which these structures of the Miboshan Formation were formed are reconstructed, and the strata underwent about three stages of deformation: (1) horizontal shortening, (2) folding, and (3) thrusting. And the fact that the Niushou Mountain is the leading edge of an old thrust sheet was proved, the Niushou Mountain, the Daluo Mountain and the Xiaoluo Mountain together constitute the front part of this old thrust zone, so the Niushou Mountain and the Ordovician strata in the central and southern parts of Ningxia now are likely allochthons. In the period from middle Ordovician to Devonian, the areas of the central and southern Ningxia belonged to the back-arc foreland basin of North Qilianshan orogen, which was adjacent to the continent in the north. In the later part of the early Paleozoic period, the Niushou Mountain was formed after the closure of the back-arc foreland basin.     

Geological outline of the Alps

The Alps were developed from the Cretaceous onwards by subduction of a Mesozoic ocean and collision between the Adriatic (Austroalpine-Southalpine) and European (Penninic-Helvetic) continental margins.The Austroalpine-Penninic wedge is the core of the collisional belt, a fossil subduction complex which floats on the European lower plate. It consists of continental and minor oceanic nappes and is marked by a blueschist-to-eclogite-facies imprint of Cretaceous-Eocene age, followed by a Barrovian overprint. The collisional wedge was later accreted by the Helvetic basement and cover units and indented by the Southalpine lithosphere, which in turn was deformed as an antithetic fold-and-thrust belt.     

闪长岩强风化带做高层建筑天然地基的可行性研究

借助于中国工商银行山东省分行营业办公楼的工程实践,将常规勘察与原位测试相结合,运用野外钻探、室内试验、原位测试多种手段,对闪长岩强风化带的物理力学性质进行了测试分析和深入地研究,并通过对承载力、沉降变形的验算,得出其作为高层建筑的天然地基是可行的。实践证明,与桩基础处理方案相比,节省资金近200万元,大大加快了施工进度,减少了基础施工难度,取得了巨大的经济效益与社会效益;同时,也提出了研究岩石风化带所遇到的问题:由于采取原状试样及制样难,导致对其物理力学性质了解不够。