西藏崩错8级地震地表破裂的变形特征及其破裂机制

1951年11月18日,西藏那曲崩错附近发生了一次8级地震,地表产生了长达约91公里的破裂带。本文总结了该破裂的几何、位移分布特征,讨论了破裂的形成机制和崩错地震的发震构造条件     

智能全站仪在大型压力容器焊接变形监测中的应用

在大型压力容器的部件焊接过程中,由于预热、焊接等工艺流程会导致各部件产生变形,从而引起部件之间的位置关系产生变化。为保证压力容器成品满足设计要求,必须在制造过程中实施变形监测,依据变形数据适当调整焊接工艺流程,控制变形量。提出采用智能全站仪配以自动变形监测软件对大型压力容器焊接变形进行实时监测,并应用于生产实践中,监测结果表明该方法自动化程度高、实时性好,能同时给出位置和姿态变形数据。     

北京市地铁暗挖施工沉降控制探讨

仅以北京市地铁4#线张自忠车站主体暗挖施工的沉降监控项目为研究背景,对穿越城市主干道的车站结构暗挖施工进行连续性的沉降变形监测;从地下构筑物暗挖施工的工序变化与地表沉降的关系进行试验研究.在预测基础上对获取的数据进行多层次的统计与分析,以研究其变形规律与稳定性,实现了信息化施工.     

变形监测信息管理系统的设计与实现

介绍了GIS数据管理与图形显示的优势、组件技术,设计了变形监测数据管理系统平台,实现了变形监测数据的智能化管理、分析与预测.     

徕卡GPS静态测量在小浪底变形监测中的应用

一、小浪底水利枢纽工程大坝变形观测设计方案1.工程概况小浪底水利枢纽工程位于黄河干流最后一个峡谷出口,上游距三门峡水利枢纽130 km,下游距郑州花园口128 km,是惟一能在黄河下游取得较大库容的控制性工程。枢纽建成后,能有效地控制黄河泥沙,减少下游淤积,提高下游的防洪标准。小浪底水利枢纽大坝为壤土斜心墙堆石坝,最大坝高154 m,坝顶长1 667 m,坝顶宽12 m,最大底宽800 m。2.主坝外部变形观测设计方案为了监测主坝的外部变形情况,在坝顶及上下游坝坡上共布设了15条视准线,工作基点24个(其中基岩标7个),表面位移标点145个,见图1。原设计…     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

Early Uplift History of the Tibetan Plateau:Records from Paleocurrents and Paleodrainage in the Hoh Xil Basin

Paleocurrent indicator data collected in field work were used to study the early Cenozoic regional paleodrainage patterns in the Hob Xil basin in northern Tibetan plateau. The paleocurrent directions of the Eocene Fenghuoshan Group obviously show that the flows were northward with a unidirectional dispersal pattern. This probably reflects the uplift of the Qiangtang terrain during the initial basin deposition period and indicates that the Tanggula Moutains occurred as topographic highlands at least in the Eocene. Paleoflows of the Oligocene Yaxicuo Group were dominantly oriented to the north and then flowed eastwards during its late deposition. This regional variability of paleodrainage patterns of the Yaxicuo Group is interpreted to record the dispersal style of sediments from transverse rivers to longitudinal river systems. It is inferred that the Oligocene uplift of the Kunlun Mountains obstructed by northward paleoflows and created longitudinal river systems parallel to the orogenic belts. The temporal and spatial changes of the paleodrainage patterns suggest that the northern boundary of the Tibetan plateau during the early Cenozoic was situated in the Hoh Xil area and its uplift has progressed northwards through time.     

Late Cenozoic Stratigraphy and Paleomagnetic Chronology of the Zanda Basin, Tibet, and Records of the Uplift of the Qinghai-Tibet Plateau

The characteristics of Late Cenozoic tectonic uplift of the southern margin of the Qinghai- Tibet Plateau may be inferred from fluvio-lacustrine strata in the Zanda basin, Ngari, Tibet. Magnetostratigraphic study shows that the very thick fluvio-lacustrine strata in the basin are 5.89- 0.78 Ma old and that their deposition persisted for 5.11 Ma, i.e. starting at the end of the Miocene and ending at the end of the early Pleistocene, with the Quaternary glacial stage starting in the area no later than 1.58 Ma. Analysis of the sedimentary environment indicates that the Zanda basin on the southern Qinghai-Tibet Plateau began uplift at -5.89 Ma, later than the northern Qinghai-Tibet Plateau. Presence of gravel beds in the Guge and Qangze Formations reflects that strong uplift took place at -5.15 and -2.71 Ma, with the uplift peaking at -2.71 Ma.     

变形分析的神经网络技术应用实例

大型工程施工过程中的变形监测、分析与预报极为重要。变形分析建模的方法很多,神经网络技术的应用是其中之一。文中结合某深基坑工程的监测资料和工作经验,运用神经网络BP算法进行预测分析。简述BP神经网络的基本概念,介绍基坑变形分析的BP神经网络的具体模型结构,将神经网络方法预报结果与实测数据对比效果较好。该成果对生产实践具有参考价值。     

波流共存场中多向随机波浪传播变形数学模型

基于波作用量守恒方程建立了波流共存场中多向随机波浪传播变形数学模型,模型中考虑了波浪绕射的影响和水流引起的波浪弥散多普勒效应,应用包含水流和地形影响的激破波模式计算波浪破碎的能量耗散,采用一阶上迎风有限差分格式离散控制方程。分别计算了有无近岸流情况下单向和多向随机波浪的波高分布,考虑水流影响的数值计算结果与物理模型实验数据吻合良好,比较分析表明,所建立的数学模型能够复演由于离岸流引起的波高增大,可用于波流共存场多向随机波浪传播变形的模拟和预报。