分形统计模型理论在岩体变形参数估算中的应用

在工程地质研究领域中,对研究域内岩体变形参数的确定一直都是热点课题,许多工程建筑项目设计的失败都缘于岩体参数估算的过大偏差.本文采用分形统计模型理论对岩体变形参数估算做了有益的探讨,并应用于工程实践,取得了较好的社会经济效益.     

岩石变形图像分析的计算机统计方法初探

本文利用岩石变形形成的显微构造现象(如压力影、亚颗粒、位错、动态重结晶颗粒等),通过图象分析计算机数理统计方法,来推测地质体变形特征、变形环境、应力状态等。      

海南石碌铁矿床构造变形特征及其与铁多金属成矿富集的关系

海南石碌铁矿曾被誉为“亚洲最大的富铁矿”,其形成、定位与褶皱变形及伴随的剪切、塑性流动等构造密切相关。石碌矿区构造变形大致分为早期(D1)复式向斜的形成时期、晚期(D2)褶皱叠加和剪切变形时期。后者又进一步分为韧-脆性变形(D2a),脆-韧性变形、层间滑脱断层形成(D2b)和脆性变形、矿体破坏(D2c)3个阶段。石碌铁矿床受NW—SE向复式向斜及其与NE—NNE向褶皱叠加所形成的横跨或斜跨褶皱的严格控制;褶皱过程所伴随的剪切变形和高温塑性流动是富铁矿形成的重要机制。复式向斜轴部,尤其是2期向斜褶皱轴的叠加部位往往可发现厚大的富铁矿体。     

公路桥涵台背回填及处治技术研究

“桥头跳车”现象,已成为高速公路的多发常见病害,分析其主要原因是桥头与路基的沉降差所致。通过对在建垫（江）邻（水）高速公路“桥、涵背”回填及处治技术研究,提出合理设置过渡台阶,使用级配碎石作回填材料,铺设土工格栅加强整体性等工程措施,经现场试验检验,处治效果较好。     

筑堤土防渗性状试验研究

结合淮河入海水道河道工程,通过渗透变形试验确定了筑堤土料的渗透变形型式、临界水力坡降和允许坡降,同时指出了采用泓道开挖土筑堤的施工控制措施、质量要求和防渗措施。     

基于梯度塑性理论的岩样在压剪条件下变形及稳定性分析

考虑了正应力及剪应力联合作用在岩样的端部,而且,在正应力被视为变量,剪应力被视为常量这一特殊条件下,对剪切带的变形特征及剪切带-带外弹性体系统的失稳判据进行了分析.根据剪切虎克定律及梯度塑性理论,提出了剪切带内部弹性应变、塑性应变及总应变的解析式,对上述三种应变进行积分,提出了剪切带错动弹性位移、塑性位移及总位移的解析式.利用压缩虎克定律及几何关系建立了剪切带外弹性体的刚度的表达式.根据刚度理论,建立了剪切带-带外弹性体系统的失稳判据.考虑岩样端面的剪切应力后,在流动剪切应力相同时,剪切带内部的弹性剪切应变(均匀分布)将增加;剪切带内部的塑性剪切应变(不均匀分布)将减小;剪切带的弹性剪切位移(线性分布)将增加;剪切带的塑性剪切位移(非线性分布)将减小;剪切带错动位移要小一些.另外,剪切应力对剪切带-带外弹性体系统的失稳判据没有影响.失稳判据仅和岩石的本构参数、剪切带倾角及结构尺寸有关.     

吉林台水电站厂房高边坡稳定性及加固措施研究

吉林台水电站厂房后边坡开挖形成140～340m的高边坡,保证其长期运行稳定性至关重要.在结合地质资料对边坡的失稳模式进行初步判断的基础上,采用极限平衡分析方法对正常蓄水、暴雨影响、地震荷载等工况条件下边坡的整体抗滑稳定性进行分析,得出暴雨对边坡稳定影响较大的结论,据此提出以排水结合预应力锚索为主的边坡加固增稳措施,实践证明该措施是有效的.     

粉喷桩处理软基的变形及固结测试分析

以广珠准高速铁路软土路堤试验粉喷桩处理段的变形及孔压测试数据为基础 ,对用粉喷桩处理深厚软土地基的沉降、基底横向差异沉降、边桩变形、孔压分布规律及固结进行了分析     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

Calculation of the Model of Coesite Inclusions and Analysis of Their Retrometamorphic Paths

The process and path of retrometamorphism of coesite have great significance to our understanding of the P-T tracks of the exhumation of ultrahigh-pressure metamorphic rocks. Most of the coesites in the eclogite from Shima, Anhui Province, the Dabie Mountains, China, are found degraded to quartz partly or wholly, with ruptures occurring in the shells, outside which include the coesite and quartz. According to the microscopic observation, the sample of coesite inclusion is composed of garnet, quartz and coesite, based on which we have built a three-shelled composite sphere model to compute the transition of coesite. Based on the crystal growth formulas and pressure conditions of the ruptures in the garnet, we have calculated the radius of the quartz sphere, which depends on temperature, and eventually drawn the different retrometamorphic paths for different retrometamorphism rates.