寨上金矿床控矿因素及成矿远景分析

文章综述了寨上金矿床的地质特征,分析了控矿因素,认为泥盆系和二叠系是矿区的矿源层,构造对成矿有决定性的作用,说明了断裂与成矿的关系,从成矿地质环境、工程控制程度和物化探异常三个方面分析了成矿远景,指出矿区有着较大的找矿潜力。     

山东三山岛金矿床流体包裹体特征及其地质意义

三山岛金矿床位于莱州市三山岛—仓上断裂带内,矿石主要为蚀变岩和含金石英脉2种类型。随着胶东金矿床研究的深入和三山岛金矿资源的不断减少,对三山岛金矿床的成矿作用及深部开发前景问题研究具有更重要的意义。针对上述问题,对三山岛金矿床2种类型矿石的成矿流体特征进行对比研究,认为代表成矿早—中期的蚀变岩型矿石形成于中温(均一温度为325～240℃)、低盐度(2.07%～6.88%)、低密度(0.720～0.868g/cm3)、酸碱性不均匀(pH=3.27～10.43)、以氟化物和氯化物为成矿物质载体的还原性流体;代表成矿中—晚期的含金石英脉型矿石形成于中—低温(均一温度为306～160℃)、低盐度(1.05%～9.73%)、低密度(0.739～0.962g/cm3)、碱性(pH=9.25～9.85)、以氯化物和硫化物为成矿物质载体的还原性流体。成矿流体性质的转变反映了成矿流体处于由比较封闭到比较开放的构造环境的转变期,且成矿流体早期以原生岩浆水为主,后期有变质水、大气降水以及海水的参与作用。三山岛金矿成矿深度为2.5～5km,根据目前的开采深度推算其深部还有一定的资源量可供开发。     

新疆北山晚古生代内生金属矿床成矿系列研究

新疆北山造山带是我国重要的铜镍金铁矿产勘查区之一.通过初步研究,按照成矿系列的学术思想,将区内晚古生代金属矿床划分为3个成矿系列,即晚古生代与基性-超基性岩浆有关的铜镍硫化物矿床成矿系列、晚古生代与强应变构造带有关的铜金矿床成矿系列和与火山岩有关的铁矿床成矿系列.     

火山沉积岩及其矿床研究中伽马测井曲线解释的误区

根据酸性凝灰岩和酸性火山事件粘土岩的自然伽马测井曲线,对当前流传的"沉积岩层的放射性强度(或放射性核素的含量)随泥质含量的增加而增高"的概念和用自然伽马值及经验公式求泥质含量提出质凝。酸性凝灰岩的自然伽马曲线有高异常响应,若解释为泥岩显然是误解,故将沉积岩伽马曲线高异常一律解释为泥岩是片面的。各类火山事件粘土岩的伽马值相差悬殊,但其泥质含量几乎相等,用它们的伽马值计算泥质含量误差甚大。最后对铝土矿层的伽马曲线稍加解释,指出核测井应用的远景。     

一个新的沉积变质型钛矿床的成矿模式及找矿方法

内蒙古羊蹄子山沉积变质型钛矿床是一个新的钛矿床类型。通过对地质、地球物理前提条件的研究和找矿方法试验,认为高精度磁法是找沉积变质型钛矿床的基本方法,重力为有效的找矿方法。在矿区北带磨石山以金红石为主的富钛矿体上有600 μGal的重力异常,无磁异常;南带的羊蹄子山钛铁矿体上重力异常为500 μGal,有60 nT的弱磁异常。     

CSAMT法在松辽盆地伊胡塔地区嫩江组中的定位应用

上白垩统嫩江组不仅是松辽盆地南部重要的生油层系,而且在本区砂岩型铀成矿中也起着非常重要的作用。从ZK4孔的方法过井测深试验以及地电结构的对比分析入手,对探区内嫩江组的空间分布范围进行了分析研究,通过钻探施工,证实了CSAMT法应用的有效性。     

广西大厂超大型锡矿的形成条件与成矿模式

超大型矿床的形成条件有其特殊性.大厂超大型锡矿产出于南丹-昆仑关基底性深大断裂带上,经过多旋回构造-岩浆活动使矿质继承叠加,最后聚积于燕山晚期的岩浆热液中.大厂超大型锡矿床是各种成矿因素良好匹配,并经长时期的多重富集综合作用的结果.     

A New Female Cone, Araucaria beipoiaoensis sp. nov. from the Middle Jurassic Tiaojishan Formation, Beipiao, Western Liaoning, China and Its Evolutionary Significance

A new species of Araucaria, Araucaria beipiaoensis sp. nov., collected from the Middle Jurassic Tiaojishan Formation, southern hill of Shebudai village, near Beipiao city, western Liaoning is based on a permineralized female cone, which is ovate to elliptical in shape, about 11 cm × 7 cm × 4.5 cm in size. The cone bears rhomboid bracts that are spirally attached, texture thicker, with wings on both sides, with a detached lamina-like apex at the tip. In inner structure the ovuliferous scales are thicker and fused with bracts at the end with a ligular sulcns. There is one wingless ovule/seed per seed-scale complex embedded in the ovuliferous scale tissue, with the micropyle directed toward the cone axis. The ovules/seeds are long ovate or elliptical in shape, 1 cm long and near the base about 3 mm in diameter; the ovule/seed integuments have begun differentiation into 3 layers： the sarcotesta, sclerotesta, and endotesta. The nucellus is free from the enclosing integuments except in the chalazal region where it is fused to the inner layer （endotesta） of integument. Some ovules show cellularized nucellar tissue. Mature seeds exhibit the papery-thin wavy nucellus characteristically near to the micropyle. The embryonic tissue appears to be four cotyledons. The morphology and structure of the cone shows a close relationship to the araucarian cones of fossil and living genera but differs from any known species. The new species is distributed in the Middle Jurassic of the northern hemisphere, especially Asia, and has important significance for the evolution of the Family Araucariaceae.     

Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

下庄矿田湖子地区铀矿找矿方向探讨

湖子地区位于NNE向诸广-新兴铀成矿带与近EW向大东山-漳州大断裂复合部位,是华南早、晚两期铀成矿热液活动叠加区、放射性高场区,既有"硅化带大脉"型铀矿产出,又有"交点"型铀矿存在,找矿前景良好.文章在论述下庄矿田铀成矿地质环境、铀成矿特征及铀矿定位条件基础上,分析了湖子地区铀成矿条件与找矿前景,指出该区今后铀矿找矿方向是:① 6009号硅化断裂带,在其北段找硅化带大脉型铀矿,在其南段找"交点"型铀矿;②新桥-下庄硅化断裂带和6009号带之间成矿部位,寻找硅化带型和"交点"型铀矿;③NW向、近EW向辉绿岩脉与NNE向、NE向构造交汇部位(交点),寻找"交点"型铀矿.