位移测量反演分析的解算模型与应用

利用现场位移测量资料反演分析是进行洞室围岩稳定分析和了解岩体介质中洞室的力学性状与设计参数的一种新手段。阐述了位移测量反演分析的基本思路、解算模型、成果检验等,并用计算实例说明了其有效性。     

基于APSO-SVR-GRU模型的白水河滑坡周期项位移预测

滑坡周期项位移的预测,是研究地质灾害中滑坡变形至关重要的一步。由于单一模型易受偶然因素影响,且无法充分利用有效信息,导致其预测精度不高,适用性不强。基于此,文中提出了一种结合自适应粒子群算法（APSO）、支持向量机回归算法（SVR）、门控神经网络算法(GRU)的组合模型。该模型通过自适应粒子群优化算法对支持向量机回归算...     

基于冲沟右旋水平位错的安丘-莒县断裂地震特征位移分析

安丘-莒县断裂是郯庐断裂带晚第四纪以来活动特征明显的断裂段,曾发生70BC安丘7级地震,对该地震的同震位错量和该断裂的长期活动习性开展研究,有助于理解郯庐断裂带的构造活动.然而一直以来,安丘—莒县段的古地震研究结果并不理想,没有很好的同震位移量证据.文中利用高分辨率的无人机SfM摄影测量技术提取了大量冲沟的右旋水平位错...     

基于性能的抗震设计方法在剪力墙结构中的应用

本文对基于性能的抗震设计方法中最具有代表性的直接基于位移的设计方法在剪力墙结构中的应用进行了研究。采用结构非线性分析程序探讨了墙厚、混凝土强度等级、纵筋配筋率、钢筋级别、轴压比、墙长等因素对单肢剪力墙屈服位移的影响,从而对现有的屈服曲率计算公式进行了改进。另外将按顶点荷载作用下的屈服位移计算公式求出的屈服位移与实际倒三角形荷载作用下的剪力墙屈服位移进行了比较,,从而推导出倒三角形荷载作用下的屈服位移计算公式。     

基于能量原理的钢筋混凝土简体结构抗震性能研究

本文通过能量法研究了钢筋混凝土简体结构的抗震性能。文中采用振型分解法按等效单自由度体系求解简体结构的滞回输入能;用pushover法分析了滞回耗能在结构层间的分布规律及结构自身的耗能能力;根据楼层滞回耗能与弹塑性层间位移的关系求出了薄弱层的弹塑性位移。对一高层钢筋混凝土框架-简体结构在7度罕遇地震下的抗震性能进行了评估,通过与非线性动力时程分析的对比,证明了方法的可行性。     

Parametric study on performance of bridge retrofitted by unseating prevention devices

1 Introduction Structural retro?t techniques (Roberts, 2005), such as restrainers, concrete shear keys, steel jackets, CFRPshells, base isolators, or dampers have been widely studied and implemented in actual structures based on the experiences learned from past earthquakes. In the Chi-Chi earthquake (EERI, 2001), the damage to simply-supported PCI girder bridges provided a different view from which to examine the function of a rubber bearing system for simply- supported bridges (NCREE,…     

An evaluation of force-based design vs. direct displacement-based design of jointed precast post-tensioned wall systems

The unique features of jointed post-tensioned wall systems, which include minimum structural damage and re-centering capability when subjected to earthquake lateral loads, are the result of using unbonded post-tensioning to attach the walls to the foundation, along with employing energy dissipating shear connectors between the walls. Using acceptance criteria defined in terms of inter-story drift, residual drift, and floor acceleration, this study presents a multiplelevel performance-based seismic evaluation of two five-story unbonded post-tensioned jointed precast wall systems. The design and analysis of these two wall systems, established as the direct displacement-based and force-based solutions for a prototype building used in the PREcast Seismic Structural Systems （PRESSS） program, were performed at 60% scale so that the analysis model could be validated using the PRESSS test data. Both buildings satisfied the performance criteria at four levels of earthquake motions although the design base shear of the direct displacement-based jointed wall system was 50% of that demanded by the force-based design method. The study also investigated the feasibility of controlling the maximum transient inter-story drift in a jointed wall system by increasing the number of energy dissipating shear connectors between the walls but without significantly affecting its re-centering capability.     

类软土滑坡滑动带的确定

类软土是一种特殊意义上的软土,它与一般沉积软土比较,在形成原因、分布范围、物质组成等其他特性上有区别;由其构成的类软土滑坡则具有普通滑坡不具有的特征。以京珠高速粤南段K108类滑坡为例,介绍了滑坡的地层岩性、构造特征、水文地质特征;应用位移监测方法查明滑坡有五层滑动带,滑面成近于圆弧形的勺形,并对滑坡的产生原因及滑动过程进行了分析,得出降雨和边坡的开挖是导致滑坡的直接诱因。     

中国地震滑坡危险性评估及其对国土空间规划的影响研究

中国是世界上地震滑坡灾害最为严重的国家之一.考虑地质构造、地形地貌、地层岩性、河流、地震动参数等6类影响因素,针对50年超越概率10％的抗震设防水准,分别开展了基于信息量模型和Newmark模型的地震滑坡危险性评估.基于最不利原则对两项结果进行地震滑坡危险性综合分区,揭示了中国地震滑坡高危险区集中在南北构造带、青藏高原...