A traverse through the western Kunlun (Xinjiang,China): tentative geodynamic implications for the Paleozoic and Mesozoic

The northern part of the western Kunlun (southern margin of the Tarim basin) represents a Sinian rifted margin. To the south of this margin, the Sinian to Paleozoic Proto-Tethys Ocean formed. South-directed subduction of this ocean, beneath the continental southern Kunlun block during the Paleozoic, resulted in the collision between the northern and southern Kunlun blocks during the Devonian. The northern part of the Paleo-Tethys Ocean, located to the south of the southern Kunlun, was subducted to the north beneath the southern Kunlun during the Late Paleozoic to Early Mesozoic. This caused the formation of a subduction-accretion complex, including a sizeable accretionary wedge to the south of the southern Kunlun. A microcontinent (or oceanic plateau?), which we refer to as “Uygur terrane,” collided with the subduction complex during the Late Triassic. Both elements together represent the Kara-Kunlun. Final closure of the Paleo-Tethys Ocean took place during the Early Jurassic when the next southerly located continental block collided with the Kara-Kunlun area. From at least the Late Paleozoic to the Early Jurassic, the Tarim basin must be considered a back-arc region. The Kengxiwar lineament, which “connects” the Karakorum fault in the west and the Ruogiang-Xingxingxia/Altyn-Tagh fault zone in the east, shows signs of a polyphase strike-slip fault along which dextral and sinistral shearing occurred.     

运动学涡度在藏南冈底斯岩浆带中段谢通门-曲水韧性剪切带中的应用

一般剪切带主要由纯剪切和简单剪切共同作用,不同的剪切带及不同的构造位置两者所占有的比例不同。利用运动学涡度(Wk)可以定量地分析两者间的比值大小。本文通过极莫尔圆法和有限应变轴率Rs/石英c轴组构法对冈底斯岩浆带中段谢通门-曲水滑覆型韧性剪切带的运动学涡度进行了计算,两种方法获得了较为一致的结果。通过极莫尔圆法,对剪切带中的9组糜棱岩样品进行了运动学涡度计算,获得了Wk=0.73~0.96,平均值Wk=0.83。运用有限应变轴率Rs/石英c轴组构法对4个样品进行了分析,得到Wk=0.85~0.93,均值为0.88,两种方法获得了较为一致的应变结果。还根据极莫尔圆图解,计算了该韧性剪切带的减薄量S=0.09~0.35,平均减薄量为0.20。研究表明该韧性剪切带为典型的以简单剪切为主伴有部分纯剪切的一般剪切,该剪切带的形成可能与拉萨地体在中新世时从挤压到侧向伸展的转换有关。该剪切带变形特征和运动学涡度的确定深化了对藏南冈底斯地区的构造演化过程的理解,并对青藏高原中南部的地质研究具有推进作用。     

海南戈枕韧性剪切带微观构造研究

韧性剪切带的定性－定量分析。能更清晰、直接地揭示构造运动生发发展过程应力、应变的状况。作者对海南戈枕韧性剪切带从显微构造角度作了系统研究工作。通过矿物粒度、形态比统计，在纵横方向上更明确了内部的复杂分带性；通过显微批向构造、矿物组权及变形变晶分析了探讨了构造活动的方式、方向；通过古应力值、剪应变、总位移量、弗林系数的测算，定量表述了该带变形机制及应力、应变速率大小。     

额尔齐斯碰撞带东段结构与形成时代

阿尔泰地体与萨吾尔岛弧之间的额尔齐斯碰撞带其结构与形成时代是中亚造山带构造演化研究的热点问题之一。本文报道了额尔齐斯碰撞带东段结构与形成时代的研究结果。新的结果显示:额尔齐斯碰撞带东段由4个走向NWNNW陡立的韧性变形带组成,剖面上呈扇状挤压变形的结构;这4个韧性变形带的应变类型为收缩应变与平面应变;片理带的变形从宏观到微观都表现出对称的结构,不同变形带不同地段可具变化的流动方向而表现出"奶油饼结构",其可能整体形成于共轴挤压机制;玉勒肯与老山口韧性变形带花岗闪长质糜棱岩、花岗闪长质超糜棱岩中变质重结晶锆石U-Pb定年结果显示韧性变形时间约为360Ma。这可能意味着早石炭世时卡拉先格尔地区已进入碰撞阶段,即萨吾尔岛弧与阿尔泰地体间在360Ma时已发生碰撞。     

哀牢山-红河剪切带左行走滑作用起始时间约束

位于哀牢山-红河剪切带NW延伸方向上的点苍山变质杂岩体遭受强烈的左行走滑剪切变形、变质作用改造,岩石中保存了典型的高温矿物组合以及由它们构成的宏观和微观高温变形构造特征,其中糜棱岩中具有极其发育的长石矿物拉伸线理而形成典型的L与LS型构造岩是其一个明显的特征。本文对点苍山地区高温糜棱岩主要矿物开展了显微构造与矿物变形、变形机制及组构分析,并对于遭受高温糜棱岩化改造的一个花岗质岩体开展了SHRIMP锆石U-Pb定年分析。结果表明岩石中长石、角闪石、石英等主要矿物具有典型的达角闪岩相条件下的高温晶质塑性变形和动态生长特征,它们也为走滑剪切变形活动提供了充分的微观构造证据。对于点苍山高温糜棱岩化改造的眼球状或似斑状二长花岗岩的显微构造分析结果表明,这套花岗质岩石从走滑剪切前期岩浆的侵位之后经历了早期强烈的岩浆期后交代作用—亚岩浆流动—高温固态塑性剪切变形的递进演化过程。由此可见,岩浆的上升与就位受左行走滑剪切作用的制约,岩体又遭受了强烈剪切变形改造。同时对这套构造前期就位花岗质岩石中的锆石进行定年分析,获得33.88±0.32Ma的岩浆结晶年龄,为此,我们有充分的理由认为,在点苍山地区哀牢山-红河剪切带左行走滑剪切作用的起始时间至少应该为早渐新世30.88±0.32Ma。     

Hercynian subduction-related processes within the metamorphic continental crust in Calabria (southern Italy)

Linking the deformation history of mylonitized continental rocks to the progress of devolatilization reactions that trigger reaction softening is critical for the understanding of crustal scale processes. We have analysed the field geometries and microstructures of deformed rocks within the southern Hercynian belt in Calabria, as well as modelled the pressure–temperature–deformation (P–T–d) trajectory of a main ductile shear zone that tectonically coupled the deeper crustal Mammola Paragneiss Unit with the upper crustal Stilo–Pazzano Phyllite Unit. P–T modelling of the mylonitic Mammola Paragneiss Unit was performed through calculation of phase equilibrium diagrams with the software thermocalc in the MnNCKFMASHTO model system. The prograde P–T–d trajectory is based on the zoning profiles of garnet porphyroblasts and their mineral inclusions, primarily barroisite and epidote. P–T modelling shows that peak metamorphic conditions of ~0.9 GPa and 585°C were reached during a D_n-1 under-thrusting event. The following exhumation during the D_n mylonitic event, and contact metamorphism during D_n+1 and D_n+2 folding events, have also been modelled because they are essential to restore the previous tectono-metamorphic history. The exhumation trajectory was modelled down to 0.3 GPa with temperatures of 440–460°C, under fluid-deficient conditions, as well as the final late Carboniferous contact metamorphism up to T_max of 680–720°C. The prograde path shows clear evidence for thermal buffering during garnet growth at the expense of chlorite, with a heating-dominated stage after chlorite breakdown. Subsequently, a rheological change associated with epidote breakdown (i.e. reaction softening) occurred, highlighted by a net steepening of the P/T trajectory towards the pressure peak. On the basis of the barroisite inclusions within garnet porphyroblasts as well as the ‘hairpin’ shape of the reconstructed P–T–d path (before contact metamorphism), we infer that the unusual low T/P gradient for the Hercynian crust exposed in the Mammola Paragneiss Unit records its involvement in the Palaeotethys–Gondwana subduction beneath Laurussia during D_n-1 under-thrusting. We present a new palaeotectonic interpretation along the southern Hercynian belt in Calabria during the Upper Mississippian–Lower Pennsylvanian, that is consistent with previous geochronology studies.     

Ductile-brittle transition in pre-Alpine amphibolite facies mylonites during evolution from water-present to water-deficient conditions (Mont Mary nappe, Italian Western Alps)

In the Austroalpine Mont Mary nappe (Italian Western Alps) discrete zones of mylonites–ultramylonites developed from coarse-grained, upper amphibolite facies metapelites of pre-Alpine age. The syn–mylonitic mineral assemblage is quartz–biotite–muscovite–plagioclase–garnet–sillimanite–ilmenite–graphite, and formed via the model hydration reaction: Grt₁+Kfs+H₂O=Bt₂+Ilm₂+Qtz+Ms± Sil .Grain-size reduction of about three orders of magnitude was accompanied by extensive recrystallization of all minerals except sillimanite, and by compositional changes of garnet and biotite. Deformation took place at temperatures of 510–580  °C under low-pressure conditions (0.25–0.45 GPa) and corresponds to the latest stages of pre-Alpine metamorphic evolution. The pre-Alpine mylonitization conditions were close to the brittle-ductile transition, as indicated by syn–mylonitic generation of pseudotachylytes and high differential stress inferred from quartz grain-size piezometry. The brittle-ductile behaviour at a relatively high temperature, and the absence of annealing textures in quartz aggregates, are suggestive of water-deficient conditions during mylonitization. These were accomplished through progressive consumption of water by syn–kinematic hydration reaction and by adsorption onto the greatly increased grain boundary area resulting from dynamic recrystallization.     

大别山东麓前寒武纪二长花岗质片麻岩抬升冷却过程的递进变形

大别山东麓北段结晶基底中的二长花岗质岩石具长石应力支撑结构,早期高级变质作用条件下的韧性推覆以长石类矿物普遍晶质塑性变形和同构造重结晶作用为典型特征,晚期在发育糜棱岩的低级韧性剪切变形阶段处于脆性状态,在其内部和边缘形成了包括微角砾岩、假玄武玻璃、黑色超糜棱岩和熔结超碎裂岩等脆性断层岩石.二长花岗质岩石中不同类型韧性和脆性断层岩石的成因和构造联系,记录了大别地体的抬升冷却历史和不同阶段构造变动的性质.     

黑龙江杂岩构造折返的岩石学与年代学证据

黑龙江杂岩主要出露在佳木斯地块西缘,沿牡丹江断裂分布,为佳木斯地块与松嫩地块拼合过程中形成的构造混杂岩。杂岩以强烈变形的糜棱岩为主体,其中含有大量规模不等、变形程度不同的变橄榄岩、变辉长岩、蓝闪石片岩(变玄武岩)及变硅质岩和大理岩等岩块或岩片。蓝闪石片岩岩块多经强烈的构造置换呈宽度和延伸有限的条带或岩片与长英质糜棱岩相间分布,发育以青铝闪石、冻蓝闪石、黑硬绿泥石、多硅白云母和钠长石等为代表的新生变质矿物组合,变形叶理呈北东向展布。但在局部地区仍保存有规模较大,且未受变形作用改造的蓝闪石片岩岩块,以不定向生长的蓝闪石、钠长石和绿帘石变质矿物组合为特征。块状蓝闪石片岩边部变形特征明显,变形叶理与周围糜棱岩叶理产状一致。岩块与变形岩石的组构关系表明,黑龙江杂岩至少经历了两期重要的变质事件,即以蓝闪石片岩岩块为代表的早期高压变质事件和以糜棱岩为代表的晚期变质-变形事件。在桦南地区长英质糜棱岩中获得的白云母⁴⁰Ar/³⁹Ar年龄分别为176.5±1.9Ma和184.5±2.1Ma,该年龄在黑龙江杂岩的变形岩石中普遍存在。鉴于蓝闪石片岩岩块被这一变质-变形事件所改造,以及变质矿物组合由高压向低压的转变关系,表明黑龙江杂岩在早-中侏罗世经历了一次快速的构造抬升事件。这一事件不但使佳木斯地块西缘以蓝片岩为代表的俯冲杂岩发生构造折返,而且对该区晚中生代盆地的形成与演化起着重要的控制作用。