HD-4002型综合测井仪

HD 4002型综合测井仪是核工业北京地质研究院于1998年开始研制的, 其目标是为铀矿地质系统提供适合砂岩型铀矿勘查的轻便型数字测井仪, 满足测井生产的需要。该仪器于2001 年3月通过部级鉴定, 2002至2003年投入海拉尔盆地铀矿勘查测井试生产。本文介绍了仪器的用途、功能及特点、性能指标, 简要说明了各部分的工作原理。     

山地丘陵地区物探爆破孔钻机及配套机具的研究与开发

为满足我国山地丘陵地区物探爆破孔施工技术的要求，研究适合土层、岩层钻进用的钻机及工具，对钻机的配套设备进行了开发研究。分析了国内山地丘陵地区物探爆破孔施工技术现状，并着重介绍了研制设计内容及生产试验情况。     

高速公路碎石桩软基加固质量检测方法探讨

该文讨论在软基地区修建高速公路时，用碎石桩进行软基处理效果的检测方法，并对其合理运用提出了建议。     

黄河水下三角洲沉积物强度变化原位测试研究

研究区位于1964～1976年黄河由刁口入海时形成的水下三角洲叶瓣上。1995年为石油开采在潮坪上构筑的交通设施对波浪形成良好的屏障。在屏障两侧各选一典型研究区，于1999年和2002年进行了大量对比性现场原位土工测试，探讨了波浪对黄河口沉积物的次生改造作用，结果表明：(1)较强的波浪荷载作用，不会提高海底沉积物的表层强度，只是导致不均匀程度随水动力作用的时间增长有所加大：(2)较强的波浪荷载作用，使得海底表层沉积物之下一定深度范围内土体强度提高，形成强度硬层：(3)海底沉积物强度沿着剖面线在平面上呈现周期性或间隔性变化。     

Direct CPT and CPTu methods for determining bearing capacity of helical piles

Helical piles are structural deep foundation elements, which can be categorized as torque-driven piles without any limitations to implement in marine situations. Different methods are used to predict the axial capacity of helical piles, such as static analysis, but have some limitation for this type of piles on marine conditions. In situ testing methods as supplement of static analysis have been rarely used for helical piles. In geotechnical engineering practice, the most common in situ tests particularly applicable for coastal or offshore site investigation are cone penetration test (CPT) and piezocone penetration test (CPTu). The CPT is simple, repeatable, and prepares the continuous records of soil layers. In this paper, a data bank has been compiled by collecting the results of static pile load tests on thirty-seven helical piles in ten different sites including CPT or CPTu data. Axial capacities of thirty-seven helical piles in different sites were predicted by direct CPT methods and static analysis. Accuracy estimation of ten direct CPT methods to predict the axial capacity of helical piles was investigated in this study. Comparisons have been made among predicted values and measured capacity from the pile load tests. Results indicated that the recently developed methods such as NGI-05 (2005), ICP-05 (2005), and UWA-05 (2005) predicted axial capacity of helical piles more accurately than the other methods such as Meyerhof (1983), Schmertmann (1978), Dutch (1979), LCPC (1982), or Unicone (1997). However, more investigations are required to establish better correlation between CPT data and axial capacity of helical piles.     

CG 2A型垂线观测仪固定式的使用

介绍CG-2A型垂线观测仪固定式的使用情况,并与便携带式进行了比较。     

An inexpensive and portable drill rig for bedrock groundwater studies in headwater catchments

Bedrock groundwater dynamics in headwater catchments are poorly understood and poorly characterized. Here, we present an inexpensive and portable bedrock drilling system designed for use in remote locations. Our system is capable of drilling bedrock wells up to 11 m deep and 38 mm in diameter in a wide range of bedrock types. The drill consists of a lawn mower engine adapted to rotate a diamond tipped coring bit, a small water pump to cool and flush the drill bit and a scaffolding platform for stable footing on steep slopes. The complete drilling assembly costs under $ 2000 USD. Here, we show proof‐of‐concept of our approach with 40 successful wells drilled in different geological substrates, including a conglomerate at the Maimai experimental catchment in New Zealand, volcanic breccias at the HJ Andrews experimental watershed in Oregon, USA, sandstone and siltstone at the Alsea watershed in Oregon, USA, and basalt at the Los Gavilanes experimental watershed in Veracruz, Mexico. We also present a transparent comparison between our design and other portable bedrock drilling systems and outline the strengths and weaknesses of each system. Copyright © 2011 John Wiley & Sons, Ltd.     

强震现场流动无线遥测地震台网观测系统的研制

描述了强震现场流动无线遥测地震台网观测系统的技术设计，系统构成，工作原理及应用。     

Spatial variability of liquefaction potential in regional mapping using CPT and SPT data

Cone penetration test (CPT) and standard penetration test (SPT) are widely used for the site specific evaluation of liquefaction potential and are getting increased use in the regional mapping of liquefaction hazard. This paper compares CPT and SPT-based liquefaction potential characterizations of regional geologic units using the liquefaction potential index (LPI) across the East Bay of the San Francisco Bay, California, USA and examines the statistical and spatial variability of LPI across and within geologic units. Overall, CPT-based LPI characterizations result in higher hazard than those derived from the SPT. This bias may result from either mis-classifications of soil type in the CPT or a bias in the CPT simplified procedure for liquefaction potential. Regional mapping based on cumulative distribution of LPI values show different results depending on which dataset is used. For both SPT and CPT-based characterizations, the geologic units in the area have broad LPI distributions that overlap between units and are not distinct from the population as a whole. Regional liquefaction classifications should therefore give a distribution, rather than a single hazard rating that does not provide for variability within the area. The CPT-based LPI values have a higher degree of spatial correlation and a lower variance over a greater distance than those estimated from SPTs. As a result, geostatistical interpolation can provide a detailed map of LPI when densely sampled CPT data are available. The statistical distribution of LPI within specific geologic units and interpolated maps of LPI can be used to understand the spatial variability of liquefaction potential.     

广西便携式决策气象服务系统

介绍广西便携式决策服务系统的设计思路和开发过程，指出：融合因特网浏览器技术、以Ｗｅｂ网站和超文本网页方式来组织构建决策气象眼务系统，是实现决策服务内容表现形式向生动化、形象化和多媒体化转变的重要途径。