最简单路径寻找方法研究

许多认知研究表明,路径指令的复杂性和形式在人类导航中和路径的长度一样重要。在很多情形下,我们所需要的不是到达目的地的最短路径,而是一条最简单路径,也就是容易描述、理解、记忆或者执行路线的导航指令。大多数自动导航系统都依赖于计算最短路径问题的解,而不是找到最简单路径。本文在分析人们对道路转向的认知研究基础上,采用了适合道路转向的路段-链数据模型,并从权重函数选择、算法具体实现和算法分析三个方面具体论述了最简单路径算法的主要思想和具体实施。     

Quantitative Constraints on Metamorphism in the Variscides of Southern Brittany--a Complementary Pseudosection Approach

Previous studies of metapelitic rocks from the core of the southernBrittany metamorphic belt suggest a complex clockwise P–Tevolution. We use pseudosections calculated for an average subaluminousmetapelite composition in the MnNCKFMASH system and averageP–T calculations to investigate in more detail the metamorphicevolution of these rocks. For migmatites, sequential occurrenceof kyanite, kyanite + staurolite and sillimanite suggests thata prograde evolution to P > 8 kbar at T     

Variation of Radio Refractivity with Respect to Moisture and Temperature and Influence on Radar Ray Path

In this study, the variation of radio refractivity with respect to temperature and moisture is analyzed. Also, the effects of vertical gradients in temperature and moisture on the propagation paths of electromagnetic waves of weather radar are examined for several sites across the United States using several years of sounding data from the National Weather Service. The ray path is important for identifying storm characteristics and for properly using the radar data in initializing numerical weather prediction models. It is found that during the warm season the radio refractivity gradient is more sensitive to moisture gradients than to temperature gradients. Ray paths from the commonly accepted vertical ray path model are compared to a ray path computed from a stepwise ray tracing algorithm using data from actual soundings. For the sample of about 16 000 soundings examined, we find that only a small fraction of the ray paths diverge significantly from those calculated using a ray path model based on the US Standard Atmosphere. While the problem of ray dueting in the presence of a temperature inversion is fairly well known, we identify the presence of a strong vertical moisture gradient as the culprit in the majority of the cases where significant deviations occurred.     

VC环境下最短路径算法的实现

设计了一种方便查找及显示最短路径的数据结构,对仅研究计算一条最短路径的Dijkstra算法加以了改进,并在VC下实现一个顶点到另一个顶点的所有最短路径的查找。     

南海毛蚶形态特征对体重的相关分析

随机选取同龄南海毛蚶Scapharca subcrenata雌性62只、雄性59只,测量壳长、壳厚、壳高、后闭壳肌直径、放射肋数及活体重。采用通径分析方法研究南海毛蚶5个形态特征对体重的总效应,并以综合决定系数为确定形态性状重要性的准则。结果表明,两性中壳厚、壳高和壳长与体重均为正相关(p<0.01),直接和间接途径都不是体重的限制因素。壳厚、壳高的平均综合决定系数分别为0.423和0.412,是影响体重最主要因素且都具有育种意义。     

P-T Paths Derived from Garnet Growth Zoning in Danba Domal Metamorphic Terrain, Sichuan Province, West China

Danba (丹巴) domal metamorphic terrain belongs to Songpan (松潘)-Ganze (甘孜) orogenic belt, where typical Barrovian and Buchan metamorphic zones are preserved. The former included chlorite, biotite, garnet, staurolite, kyanite and sillimanite zones, while the latter only developed silimanite+muscovite and sillimanite+K-feldspar zones. Integrated study has been carried on metamorphic reactions of garnet production and consumption, P-T paths and P-T-X-M phase relation and thermal tectonic model for Danba metamorphic zones. Petrological textures in thin sections show that garnet production and consumption in kyanite-sillimanite zone is mainly attributed to ChI+Ms+PI+Q=Grt+Bt+H2O and kyanite=sillimanite respectively. Based on mineral compositions, the geothermobarometry gives an average P, T condition of (4.9±0.3)×108 Pa, 543±30℃ for the first growth stage of the garnet and (5.8±0.3)±108 Pa, 534±29 ℃ for the second stage of garnet growth respectively. Anti-counter clockwise P-T paths were drawn using Gibbs method by NCMnKFMASH system for sample G98686 in the kyanite zone. The P-T-X-M modeling for the first mineral assemblages shows that the prediction is similar to the measured values in gossular, almandine and spessartine but mole fraction of pyrope and Fe/(Fe+Mg) deviated far from the contours; while that for the second mineral assemblages exhibits that the prediction is consistent with the measured value of pyrope, grossular content and Fe/(Fe+Mg) of garnet. A thermal tectonic model that there are at least three structure levels across the thrnst-decollement zones is presented according to the P-T paths, metamorphic grades and deformation styles for the staurolite-kyanite zone of the Barroviau type metamorphism, which will provide some constraints for the evolution of the nappe complex.     

点苍山-哀牢山变质杂岩带变沉积岩的变质演化

点苍山-哀牢山变质杂岩带位于青藏高原东南缘大理-元江-元阳-河口一带,出露规模达数百千米,是扬子板块和印支陆块之间的一条重要构造带.该变质杂岩带主要由各类正片麻岩、副片麻岩、大理岩所组成,夹有斜长角闪岩、石榴辉石岩和超镁铁质岩石的透镜体或团块.其中,变沉积岩如含夕线石和蓝晶石的片麻岩类岩石保存了多阶段的矿物组合及异常复杂的矿物相转变关系.详细的岩相学、成因矿物学以及矿物相转变关系分析表明,变沉积岩系经历了早期进变质阶段(M1)、峰期角闪-麻粒岩相变质阶段(M2)、峰后近等温减压(脱水熔融)阶段(M3)以及晚期退变质阶段(M4)的变质演化.其中,M1阶段的稳定矿物组合为石榴石+斜长石+白云母+石英+十字石±蓝晶石±黑云母±钾长石,M2阶段的稳定矿物组合为石榴石+黑云母+蓝晶石/夕线石+斜长石+石英、石榴石+黑云母+斜长石+石英±钾长石±夕线石,M3阶段的共生矿物组合为石榴石+黑云母+夕线石+斜长石+石英,M4阶段的矿物组合为黑云母+白云母+斜长石+石英±钾长石±石榴石等.通过传统GB-GASP温压计和二云母温度计的估算结果,配合P-T视剖面定量计算,确定早期进变质阶段(M1)的温压条件为T=560 ～ 590℃,P=5.5 ～6.3kb,峰期角闪-麻粒岩相阶段(M2)的温压条件为T=720～ 760℃、P=8.0～9.3kb,峰后近等温减压阶段(M3)的温度压力条件为T=640～760℃,P=5.0～7.3kb,晚期退变阶段(M4)的温压条件为T=521～648℃,P=4.0～5.0kb.上述研究结果表明,点苍山-哀牢山变沉积岩记录了典型碰撞造山带型式的顺时针P-T演化轨迹,表明点苍山-哀牢山变质杂岩带的形成与印度板块和欧亚板块之间的俯冲-碰撞存在密切的成因关系.     

内蒙古固阳福顺店渣尔泰山群增隆昌组的风暴沉积特征

本文着重叙述了渣尔泰山群增隆昌组的沉积特征和沉积相序特征 ,并对其成因进行了分析 ,区内的增隆昌组白云岩为一风暴沉积相序 ,该相序的发现对进一步研究渣尔泰山群的沉积环境及古地理特征具有一定意义。     

GPM双频降水测量雷达对降雪的探测能力分析

以双频降水测量雷达为主载荷的GPM卫星于2014年2月发射升空。由于轨道倾角以及仪器通道的设置,大大提升了对弱降水和降雪的探测能力。通过四次降雪个例,分析比较了双频降水测量雷达的三种扫描模式(Ku,KaMS和KaHs)对降雪探测能力的差异。结果表明:DPR相态产品和地面实际观测结果比较一致,固态降雪温度-0.5℃并且降雪发生时的风暴顶高度大多6 km。Ku波段雷达由于仪器灵敏度的大幅提高.对降雪的综合探测能力最强,而KaMs和KaHS也具有特定的作用。此外,为了保证衰减订正的精度,和非降雪部分的衰减相比,需要主要提高降雪衰减尤其是混合相态湿雪的衰减订正精度。     

Multi-Source Emission Determination Using an Inverse-Dispersion Technique

Inverse-dispersion calculations can be used to infer atmospheric emission rates through a combination of downwind gas concentrations and dispersion model predictions. With multiple concentration sensors downwind of a compound source (whose component positions are known) it is possible to calculate the component emissions. With this in mind, a field experiment was conducted to examine the feasibility of such multi-source inferences, using four synthetic area sources and eight concentration sensors arranged in different configurations. Multi-source problems tend to be mathematically ill-conditioned, as expressed by the condition number κ. In our most successful configuration (average κ = 4.2) the total emissions from all sources were deduced to within 10% on average, while component emissions were deduced to within 50%. In our least successful configuration (average κ = 91) the total emissions were calculated to within only 50%, and component calculations were highly inaccurate. Our study indicates that the most accurate multi-source inferences will occur if each sensor is influenced by only a single source. A “progressive” layout is the next best: one sensor is positioned to “see” only one source, the next sensor is placed to see the first source and another, a third sensor is placed to see the previous two plus a third, and so on. When it is not possible to isolate any sources κ is large and the accuracy of a multi-source inference is doubtful.