Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.     

全球海洋与大气界面的熵通量估算

给出并讨论了海洋系统中由于热量交换、物质交换以及外力做功引起的熵通量的表达式;同时,根据新近调整的全球海 气界面的气候平均资料,估计了全球海洋与大气界面气候年平均的熵通量(熵流),这一熵通量主要取决于海 气界面的热量和物质交换的空间不均匀性。计算结果显示,由热量交换分量引起的熵通量对海洋系统的总熵通量起到主要的贡献作用,其值约为-555.6mW·(m2·K)-1;由海表风应力做功引起的熵通量相对较小,约为-0.09mW·(m2·K)-1;由物质交换引起的熵通量最小,仅为-0.02mW·(m2·K)-1。总的来说,海洋系统从外界获得的总熵通量为-555.7mW·(m2·K)-1,这也就意味着在气候平均定态下,海洋系统内部的熵产生在量值上等于系统的熵交换,即为555.7mW·(m2·K)-1。海洋系统的负熵流与其内部的各种不可逆过程引起的熵产生取得平衡,确保了全球海洋系统处于非平衡热力学定态,并维持着海洋系统中各种尺度的时 空有序现象的消长过程。     

The impact of the M2 internal tide on data-assimilative model estimates of the surface tide

We use a synthetic data experiment to assess the accuracy of ocean tides estimated from satellite altimetry data, with emphasis on the impact of the phase-locked internal tide, which has a surface expression of several centimeters near its sites of genesis. Previous tidal estimates have regarded this signal as a random measurement error; however, it is deterministic and not scale-separated from the barotropic (surface) tide around complex bathymetric features. The synthetic data experiments show that the internal tide has a negligible impact on the barotropic tidal fields inferred under these circumstances, and the barotropic dissipation (a quadratic functional of the tidal fields) is in good agreement with the energetics of the three-dimensional regional primitive equations model which is the source of the synthetic data.     

海上矿石运输最优船队的组建

针对海上矿石运输，介绍了一种完成定量任务并能使投资费用最少为目标的最优船队组建方法，同时对易变参数进行了灵敏度分析，使决策更加科学化     

三次样条函数在海洋水文资料整理中的应用

本文引入三次样条函数插值法,并尝试用于海洋资料处理。根据渤海及北黄海部分海洋站的历史资料进行了试验。用SHARP—PC—1211袖珍计算机进行计算,并将资料处理的结果与传统的过程曲线法订正值作了比较。结果表明,二者之间的误差不大,而样条函数拟合更好。作者认为三次样条函数插值法是可行的,在处理海洋资料时间序列中是有效的。在有温跃层的地方,如何应用,本文也给出了必要的说明。     

胜利二号极浅海步行坐底式钻井平台防腐措施研究

本文根据胜利二号极浅海步行坐底钻井平台的作业和工作环境特点，进行了防腐措施研究，设计了切合实际的防腐措施。该平台在海上作业近四年进坞修理，经观测防腐情况良好。     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。