一种有发展前景的隧道及井巷超前预报技术——电磁导弹探测技术

对于隧道和煤矿井巷的安全掘进 ,超前预报显得特别重要。但由于掌子面前的特殊环境限制及多种干扰的严重影响 ,给隧道及井巷超前预报技术的研究带来许多困难。在瞬变电磁理论的基础上 ,引入新的电磁传播理论———电磁导弹技术 ,作为对该技术的初步探索 ,文章论证了该技术在隧道超前预报中应用的可能性 ,并提出了研究的主要内容和发展方向以及可能取得的新的技术突破和技术支撑     

隧道工程地质评价的内容和方法

结合工程隧道实际,首先阐述了隧道工程的基本地质环境和工程地质条件,然后针对隧道工程可能出现的不良地质现象和可采取的工程措施,从大气降水、围岩稳定、围岩压力、洞口稳定、隧道比选等角度探讨隧道工程地质评价的主要方法和一般内容,进行隧道工程地质评价,为隧道施工、支护提供了依据.     

美国的地下空间开发和利用

通过对美国地下空间开发利用的考察,认为有如下特点,第一,结合城市建设,构筑地下铁道,第二立足于战略,建立水下通路,第三,地下空间的开发利用平战结合.这些方法对我国的地下空间开发利用值得借鉴.     

瞬变电磁法探测公路隧道工程中的不良地质构造

为了给公路设计部门提供选线依据,运用瞬变电磁法在山西境内的某两条高速公路隧道工程设计线路段上进行探测,以查明下覆不良地质构造的发育情况.通过对瞬变电磁法的探测能力进行理论上的讨论,对不同地电断面情况下的异常体电磁响应的定性分析,得出用瞬变电磁法探测不良地质体的可行性结论.经过资料处理,查出不良地质构造赋存的位置,解释结果与钻探资料完全吻合.     

TBM在不良地质洞条件下的施工技术

TBM掘进机以其快速、高效、安全、优质等优点越来越广泛地被应用于隧洞开挖施工中,尤其更适用于深埋超长隧洞,然而在不良地质洞段中TBM掘进缓慢,甚至有卡刀可能,反而不如钻爆法灵活,这就需要根据围岩性状采取特殊技术处理措施,辅以监控量测手段对支护方案进行验证、调整支护措施、修正设计参数等。结合辽宁大伙房输水隧洞工程,总结了在不良地质洞条件下的超前地质预报方法、不良地质段处理措施以及围岩变形监测方法。     

大型越江盾构隧道施工安全与风险管理探讨

对大型泥水盾构隧道施工安全与施工风险进行详细全面的分析,指出了施工安全与施工风险对人身安全、工程结构和施工机械设备带来的危害。结合工程实例和实践经验,对大型越江盾构隧道施工安全与风险管理进行全面探讨。     

In-Situ Observation of Fluid Mud in the North Passage of Yangtze Estuary, China

Observations of fluid mud were made in the lower North Passage of the Yangtze Estuary in February 2000, on 10 -11 August 2000, on 30 - 31 August 2000 (after two strong typhoons), on 21 - 24 August 2000 (neap tide) and on 3 -6 September 2000 (mean tide) respectively. In situ data show that the fluid mud in this area consists of fine cohesive sediment (median size 7.23 μm). The formation and movement of fluid mud varied during the neap-spring and flood-ebb tidal cycle. Observations suggest that fluid mud phenomena in this area may be categorised in a three-fold manner as slack water, storm and saltwedge features. The thickness of the fluid mud layer of slack water during the neap tide ranged from 0.2 to 0.96 m, whereas during the mean tide, the thickness ranged from 0.17 to 0.73 m, and the thickness of the fluid mud layer was larger during slack water than at the flood peak. Shoals cover an area of 800 km^2 with a water depth smaller than 5 m. Erosion of these extensive intertidal mudflats due to storm action provides an abundant sediment source. This is particularly significant in this estuary when the tidal level is lower than 5 m. The lower North Passage is a typical zone of saltwater wedging, so the saltwedge fluid mud has the most extensive spatial range in the estuary.     

The dimensions of sand ripples in full-scale oscillatory flows

New large-scale experiments have been carried out in two oscillatory flow tunnels to study ripple regime sand suspension and net sand transport processes in full-scale oscillatory flows. The paper focuses on ripple dimensions and the new data are combined with existing data to make a large dataset of ripple heights and lengths for flows with field-scale amplitudes and periods. A feature of the new experiments is a focus on the effect of flow irregularity. The combined dataset is analysed to examine the range of hydraulic conditions under which oscillatory flow ripples occur, to examine the effects of flow irregularity and ripple three-dimensionality on ripple dimensions and to test and improve existing methods for predicting ripple dimensions.The following are the main conclusions. (1) The highest velocities in a flow time-series play an important role in determining the type of bedform occurring in oscillatory flow. Bedform regime is well characterised by mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth peak velocities in the case of irregular flow. (2) For field-scale flows, sand size is the primary factor determining whether equilibrium ripples will be 2D or 3D. 2D ripples occur when the sand D₅₀ ≥ 0.30 mm and 3D ripples occur when D₅₀ ≤ 0.22 mm (except when the flow orbital diameter is low). (3) Ripple type (2D or 3D) is the same for regular and irregular flows and ripple dimensions produced by equivalent regular and irregular flows follow a similar functional dependence on mobility number, with mobility number based on maximum velocity in the case of regular flow and based on the mean of the highest one tenth velocities in the case of irregular flow. For much of the ripple regime, ripple dimensions have weak dependency on mobility number and ripple dimensions are similar for regular and irregular flows with the same flow orbital amplitude. However, differences in ripples produced by equivalent regular and irregular flows become significant at the high mobility end of the ripple regime. (4) Ripple dimensions predicted using the Wiberg and Harris formulae are in poor agreement with measured ripple dimensions from the large-scale experiments. Predictions based on the Mogridge et al. and the Nielsen formulae show better overall agreement with the data but also show systematic differences in cases of 3D ripples and ripples generated by irregular flows. (5) Based on the combined large-scale data, modifications to the Nielsen ripple dimension equations are proposed for the heights and lengths of 2D ripples. The same equations apply to regular and irregular flows, but with mobility number appropriately defined. 3D ripples are generally smaller than 2D ripples and estimates of 3D ripple height and length may be obtained by applying multipliers of 0.55 and 0.73 respectively to the 2D formulae. The proposed modified Nielsen formulae provide an improved fit to the large-scale data, accounting for flow irregularity and ripple three-dimensionality.     

航空重力测量数学模型及其测量精度分析

基于数学和分析力学角度分别推导了航空矢量重力测量的数学模型,得到了一致的模型公式;给出了矢量模型的3个分量形式,其中垂直方向的分量就是标量重力测量的数学模型;简要介绍了我国研制成功的航空标量重力测量系统CHAGS的数据处理的过程,分析了标量重力测量中测线交叉点和重复测线的重力异常的精度;根据实测数据计算的结果表明:测线交叉点重力异常不符值的标准差约为5×10-5ms-2左右,重复测线的内符合精度优于5×10-5ms-2,达到了预期的要求。